JennAir JS48NXFXDE PRODUCT SPECIFICATIONS

JENN-AIR® SIDE BY SIDE BUILT-IN REFRIGERATOR

REFRIGERADOR EMPOTRADO

DE DOS PUERTAS JENN-AIR

RÉFRIGÉRATEUR ENCASTRÉ CÔTE À CÔTE

JENN-AIR

W10681449A

INSTALLATION GUIDE

For questions about features, operation/performance, parts, accessories, or service, call:

1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.com.

In Canada, call: 1-800-JENNAIR (1-800-536-6247), or visit our website at www.jennair.ca.

GUÍA DE INSTALACIÓN

Si tiene preguntas respecto a las características, funcionamiento, rendimiento, partes, accesorios o servicio técnico, llame al:

En Canadá, llame al: 1-800-JENNAIR (1-800-536-6247), o visite nuestro sitio de internet: www.jennair.ca.

Au Canada, pour assistance, installation ou service, composez le 1-800-JENNAIR (1-800-536-6247) ou visitez notre site web à

1-800-JENNAIR (1-800-536-6247) o visite nuestro sitio de internet: www.jennair.com.

GUIDE D’INSTALLATION

www.jennair.ca.

Table of Contents/Índice/Table des matières......................................................................................2

TABLE OF CONTENTS

REFRIGERATOR SAFETY...........................................................................3

MODELS....................................................................................................... 4

Accessories............................................................................................... 4

INSTALLATION REQUIREMENTS ............................................................. 5

Tools and Parts.........................................................................................5

Location Requirements............................................................................. 6

Electrical Requirements............................................................................7

Water Supply Requirements..................................................................... 8

Product Dimensions .................................................................................8

Tipping Radius.......................................................................................... 9

Door Swing Dimensions ...........................................................................9

Cabinet and Panel Installation Options..................................................10

Fully Integrated Grille Installation Requirements.................................... 11

Standard Integrated Grille Installation Requirements............................12

Panel Kit Installation Requirements........................................................12

Custom Wood Overlay Panels ...............................................................13

Custom Wood Overlay Panel Dimensions .............................................13

ÍNDICE

SEGURIDAD DEL REFRIGERADOR........................................................ 24

MODELOS..................................................................................................25

Accesorios ..............................................................................................25

REQUISITOS DE INSTALACIÓN.............................................................. 26

Herramientas y piezas ............................................................................26

Requisitos de ubicación .........................................................................27

Requisitos eléctricos...............................................................................29

Requisitos del suministro de agua ......................................................... 29

Medidas del producto.............................................................................30

Arco de vuelco........................................................................................ 31

Medidas de oscilación de las puertas....................................................31

Opciones para la instalación del armario y los paneles.........................31

Requisitos para la instalación de la rejilla completamente incorporada32

Requisitos para la instalación de la rejilla incorporada estándar...........33

Requisitos de instalación del juego de paneles.....................................34

Paneles de madera recubiertos a la medida..........................................34

Dimensiones del panel de madera recubierto a la medida....................35

INSTALLATION INSTRUCTIONS............................................................. 14

Unpack the Refrigerator .........................................................................14

Move the Refrigerator into House ..........................................................14

Install Anti-Tip Boards ............................................................................ 14

Connect the Water Supply .....................................................................15

Plug in Refrigerator................................................................................. 16

Install Side Trims .................................................................................... 17

Move Refrigerator to Final Location....................................................... 17

Level and Align Refrigerator ...................................................................18

Install Refrigerator and Panels ............................................................... 18

Install Base Grille ....................................................................................23

Complete Installation..............................................................................23

INSTRUCCIONES DE INSTALACIÓN...................................................... 36

Desempaque el refrigerador...................................................................36

Cómo introducir el refrigerador en la casa.............................................36

Cómo instalar los tableros antivuelco.................................................... 37

Conexión del suministro de agua........................................................... 37

Cómo enchufar el refrigerador ............................................................... 39

Instalación de las molduras laterales ..................................................... 39

Cómo mover el refrigerador a su ubicación final................................... 40

Nivelación y alineamiento del refrigerador.............................................40

Instalación del refrigerador y los paneles...............................................41

Instalación de la rejilla de la base........................................................... 46

Cómo terminar la instalación.................................................................. 46

TABLE DES MATIÈRES

SÉCURITÉ DU RÉFRIGÉRATEUR ...........................................................47

MODÈLES ..................................................................................................48

Accessoires.............................................................................................48

EXIGENCES D’INSTALLATION................................................................ 49

Outillage et pièces ..................................................................................49

Exigences d’emplacement .....................................................................50

Spécifications électriques....................................................................... 52

Spécifications de l’alimentation en eau..................................................52

Dimensions du produit............................................................................52

Rayon de basculement...........................................................................53

Dimensions pour le pivotement des portes ...........................................53

Options d’installation du placard et du panneau ...................................54

Spécifications d’une installation grille totalement intégrée....................55

Critères d’une installation avec grille intégrée standard........................56

Spécifications pour l’installation de l’ensemble de panneaux...............56

Panneaux de bois décoratifs personnalisés .......................................... 57

Dimensions des panneaux de bois décoratifs personnalisés................57

INSTRUCTIONS D’INSTALLATION .........................................................58

Déballage du réfrigérateur...................................................................... 58

Faire entrer le réfrigérateur dans le domicile.......................................... 59

Installation de planches antibasculement..............................................59

Raccordement à l’alimentation en eau................................................... 60

Branchement du réfrigérateur ................................................................61

Installation des garnitures latérales........................................................ 62

Déplacement du réfrigérateur à son emplacement définitif................... 62

Réglage de l’aplomb et alignement du réfrigérateur..............................63

Installation du réfrigérateur et des panneaux......................................... 63

Installation de la grille de la base ........................................................... 68

Achever l’installation............................................................................... 68

REFRIGERATOR SAFETY

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

MODELS

Custom-Made Panel Design

Features custom-made panels and custom hardware provided by the cabinetmaker for a seamless appearance designed to blend with existing kitchen cabinetry.

Base Model Numbers: JS42NXFXDW, JS48NXFXDW

Pro-Style

Features stainless steel wrapped doors and Pro-Style® handles with diamond-etched grip.

Base Model Numbers: JS42NXFXDW, JS48NXFXDW Kit Model Numbers: JPK42SNXWPS, JPK48SNXWPS

Stainless Design

Accessories

All factory parts are available through your Jenn-Air dealer or by calling Jenn-Air at 1-800-JENNAIR (1-800-536-6247). In Canada, call 1-800-807-6777.

Door Handle Kits

For custom wood overlay panels only, handle kits can be ordered. Follow the kit instructions for installation.

IMPORTANT: These handle kits are not intended for use with stainless steel door panel kits.

Pro-Style Euro-Style Stainless Steel - W10250640 Classic Euro-Style - W10250637

Armoire-Style Door Panel Kit

Follow the kit instructions for installation.

42" Model - W10292393 48" Model - W10292394

Stainless Steel - W10250643

Euro-Style Stainless Design

Features stainless steel wrapped doors with new Euro-style handles designed to compliment the Jenn-Air Euro kitchen suite or enhance any kitchen decor.

Base Model Numbers: JS42NXFXDW, JS48NXFXDW Kit Model Numbers: JPK42SNXWSS, JPK48SNXWSS

INSTALLATION REQUIREMENTS

Tools and Parts

IMPORTANT:

■ Installer: Leave Installation Instructions with the homeowner.

■ Homeowner: Keep Installation Instructions for future

reference. Save these Installation Instructions for the local electrical inspector’s use.

Tools Needed:

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

■ Cordless drill

■ Drill bits

■ Adjustable wrenches (2)

■ Phillips screwdriver

■ Small level

■ ³⁄₃₂" hex key

(panel kits only)

■ ¹¹⁄₃₂" nut driver

Parts Needed:

■ #8 x 3" (7.6 cm) wood screws (longer screws may be needed) (6)

■ 2" x 4" x 32" (5 cm x 10 cm x 81 cm) wood boards (2)

■ Custom wood overlay panels—consult a qualified

cabinetmaker or carpenter to make the custom wood panels. See “Custom Wood Overlay Panels” for more information.

Panel kit—See “36" Models or 42" French Door Models” for panel kit information.

■ Flexible, codes approved water supply tubing, a ferrule, a

union and a ¹⁄₄" (6.35 mm) compression fitting.

Parts Provided:

■ ³⁄₈" and ¹⁄₂" open-end wrenches

■ ⁵⁄₃₂" and ³⁄₁₆" hex key

■ ¹⁄₄" and ⁵⁄₁₆" socket drivers

■ Tape measure

■ Utility knife

■ Tape (painters)

■ Appliance dolly

Phillips-head flat screw

8281251 (28)

Door Adjustment Pin (preinstalled)

W10234194 (2)

Drawer Panel Bracket

W10203457 (2)

Round-head screw

1163283 (24)

Door Stop Pin

W10234202 (2)

Standard Integrated Grille Bracket

W10182743—Left (1) W10182741—Right (1)

Slotted hex-head screw

W10141645 (21)

Hex-head blunt screw

W10142233 (4)

Hex-head pointed screw

W10141189 (8)

Shoulder washer (use with hex-head pointed screw)

W10471946 (4)

Fully Integrated Grille Bracket

W10260890—Left (1) W10260891—Right (1)

Panel top bracket

W10192849 (2)

Filler Board “L” Bracket

W10234199 (2)

Top Grille Lower Trim

W10250961—36" BM (1) W10250962—42" BM, SxS (1) W10250963—48" SxS (1)

RC Hinge Cover Trim

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

¹⁄₂"

(1.3 cm)

W10199873—42" SxS W10199875—48" SxS W10202875—36" BM

(Right) W10202510—42" FDBM

(Right)

Panel templates

W10222281—SxS W10222279—BM W10222283—Grille

Installation block

W10234156

FC Hinge Cover Trim

W10199886—42" SxS W10199888—48" SxS W10202877—36" BM (Left) W10202511—42" FDBM (Left)

Handle Side Door Trim

W10167367—SxS W10188556—BM (Left) W10202604—BM (Right) W10202478—FDBM (Right) W10202480—FDBM (Left)

Grille—Bottom / Skirt—Grille

W10189198 / W10188549—42" BM W10189196 / W10199547—36" BM W10182718 / W10188551—48" SxS W10182717 / W10188549—42" SxS

■ Do not install in a location where the temperature will fall

below 55°F (13°C).

■ Floor must support the refrigerator weight, more than 600 lbs

(272 kg), door panels and contents of the refrigerator. Flooring under refrigerator must be at same level as the room. Face of cabinetry must be plumb.

■ Ceiling height must allow for side tipping radius. See “Tipping

Radius.”

■ Location should permit door to open fully. See “Door Swing

Dimensions.”

■ Location must permit top grille removal. See “Opening

Dimensions.”

Opening Dimensions

IMPORTANT:

■ The width of the opening (Width A), from side to side, must be

as specified for your model, for at least 2" (5.08 cm) back from the face of the cabinet.

NOTE: If your opening does not meet this requirement, you will need to make modifications.

■ A solid soffit or wall cabinet must be installed 84" (213.4 cm)

above the floor. If the solid soffit is higher than 84" (213.4 cm) or one is not available, then the refrigerator must be braced.

If anti-tip boards are needed, they must be installed to the rear wall studs so that the bottom of the anti-tip board is 84" (231.4 cm) from the floor. See “Install Anti-Tip Boards” for more information.

NOTES:

■ A clearance of ¹⁄₂" (1.3 cm) must be maintained above the

top grille so that the top grille can be removed.

■ Do not remove the foam gasket from the top of the

compressor cover unless removal is necessary to fit the unit under a soffit. Removal of the gasket will cause loss in cooling efficiency.

■ If installing under a solid soffit, after installation raise the

leveling legs so that the gasket is pressed snugly against the soffit.

Location Requirements

IMPORTANT:

■ Observe all governing codes and ordinances.

■ It is recommended that you do not install the refrigerator near

an oven, radiator, or other heat source.

A. Gasket B. Compressor cover

■ For a fully integrated installation, a minimum of 6" (15.24 cm)

of open space above the refrigerator is required. See “Fully Integrated Installation.” Anti-tip boards are required. See “Install Anti-Tip Boards” for more information.

■ A grounded 3 prong electrical outlet should be located within

a specified number of inches from the right-hand side cabinets or end panel. See the chart following the graphic for the number of inches required for your model. For more information, see “Electrical Requirements.”

■ The water shutoff should be located in the base cabinet on

C Depth

Dimension

Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

either side of the refrigerator or some other easily accessible area. If the water shutoff valve is not in the cabinets, the plumbing for the water line can come through the floor. See “Water Supply Requirements” for more information.

84" (213.4 cm) to bottom of solid soffit

Electrical Requirements

Model

42 48

Width

(see chart following)

Width A (as shown above)

42" (106.7 cm) 48" (121.9 cm)

77" (196 cm)

Dimension B (as shown above)

7¹⁄₂" (19.1 cm) 13¹⁄₂" (34.3 cm)

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

IMPORTANT: If this product is connected to a GFCI (Ground Fault Circuit Interrupter) protected outlet, nuisance tripping of the power supply may occur, resulting in loss of cooling. Food quality and flavor may be affected. If nuisance tripping has occurred, and if the condition of the food appears poor, dispose of it.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, remove the top grille and turn the master power switch to OFF or disconnect power at the circuit breaker box.

When you are finished, turn ON the master power switch or reconnect power at the circuit breaker box. Then reset the control to the desired setting.

Installation Type Depth C (as shown

Standard Flush (new installation)

Retrofit Installations 24" (60.9 cm) minimum

above)

25" (63.5 cm) minimum

Water Supply Requirements

(2.54 cm)

(15.2 cm)

24"

(61.0 cm)

IMPORTANT:

■ All installations must meet local plumbing code requirements.

■ There is not enough clearance to achieve a flush installation if

a water shutoff valve is located in the wall behind the refrigerator.

■ The water shutoff should be located in the base cabinet on

either side of the refrigerator or some other easily accessible area. The water supply line, however, must come up through the floor in the gray shaded area shown.

■ A ½" (12.7 mm) hole for plumbing should be drilled on the

floor at least 6" (15.2 cm) from the right or left hand side cabinet and should be no more than 1" (2.54 cm) away from the back wall. See “Connect the Water Supply.”

■ The water supply connection is made at the front of the

refrigerator.

■ If additional tubing is needed, use copper tubing and check

for leaks. Install the copper tubing only in areas where the household temperatures will remain above freezing.

■ Do not use a piercing-type or ³⁄₁₆" (4.76 mm) saddle valve

which reduces water flow and also clogs more easily. NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes.

Water Pressure

A cold water supply with water pressure between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a

reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and 827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276 to 414 kPa):

■ Check to see whether the sediment filter in the reverse

osmosis system is blocked. Replace the filter if necessary.

■ Allow the storage tank on the reverse osmosis system to refill

after heavy usage.

■ If your refrigerator has a water filter, it may further reduce the

water pressure when used in conjunction with a reverse osmosis system. Remove the water filter cartridge.

If you have questions about your water pressure, call a licensed, qualified plumber.

Product Dimensions

IMPORTANT:

■ The depth from the front face of the doors to the back of the

refrigerator cabinet is 24" (60.96 cm) without panels.

■ The power cord is 84" (213 cm) long.

■ The water supply connection is made at the bottom front of

the refrigerator.

Top View

Model A

42 41³⁄₄" (106 cm) 48 47³⁄₄" (121.3 cm)

Front View

*83³⁄₈" (211.8 cm)

(see chart following)

90˚

110˚

90˚

BA C D

■ Width dimensions were measured from hinge to hinge.

■ When leveling legs are fully extended to 1¹⁄₄" (3.2 cm) below

rollers, add 1¹⁄₄" (3.2 cm) to the height dimensions.

Tipping Radius

Be sure there is adequate ceiling height to stand the refrigerator upright when it is moved into place.

■ The dolly wheel height must be added to the tipping radius

when a dolly is used.

Side Tipping Radius

The side tipping radius varies depending upon the width of the model. Use the chart provided to determine the side tipping radius.

NOTE: Tip on side only.

Model Tipping Radius A

Model Width A (hinge edge to hinge edge)

42 41³⁄₄" (106 cm)

48 47³⁄₄" (121.3 cm)

42 48

91³⁄₈" (232.1 cm) 94³⁄₈" (239.7 cm)

Door Swing Dimensions

The location must permit both doors to open to a minimum of 90°. Allow 4¹⁄₂" (11.4 cm) minimum space between the side of the refrigerator and a corner wall.

NOTE: More clearance may be required if you are using wood overlay panels, custom handles, or extended handles.

Model A B C D

42 40³⁄₄"

(103.5 cm)

48 43¹⁄₄"

(109.9 cm)

39³⁄₄" (101.0 cm)

42" (106.7 cm)

45³⁄₈" (115.3 cm)

48⁵⁄₈" (123.5 cm)

46³⁄₄" (118.8 cm)

50¹⁄₄" (127.6 cm)

Cabinet and Panel Installation Options

E D C

A B

D C

A B

E D

A B

D C

A B

NOTE: Graphics shown below illustrate installation configuration options given the specified cabinet depths. All possible configurations are not shown.

Cabinet Depth—25" (63.5 cm)

Framed Cabinetry

Top V ie w

A. Refrigerator door B. Door panel C. Side trim

Inset

Top V ie w

D. Adjacent cabinet

E. Flush return filler F. 25" (63.5 cm)

Cabinet Depth—24" (60.9 cm)

NOTE: A flush installation is not possible with a 24" (60.9 cm)

deep opening.

Framed Cabinetry

Top View

A. Refrigerator door B. Door panel C. Side trim

D. Adjacent cabinet

E. Flush return filler F. 24" (60.9 cm)

Frameless Cabinetry

Top View

A. Refrigerator door B. Door panel C. Side trim

Frameless Cabinetry

Top V ie w

A. Refrigerator door

B. Door panel

C. Side trim

D. Adjacent cabinet

E. Flush return filler F. 25" (63.5 cm)

D. Adjacent cabinet

E. 25" (63.5 cm)

A. Refrigerator door B. Door panel C. Side trim

D. Adjacent cabinet

E. 24" (60.9 cm)

Fully Integrated Grille Installation Requirements

6" (15.24 cm)

min.

84"

(213.4 cm)

6" (15.24 cm) min.

84"

(213.4 cm)

The refrigerator can be installed fully integrated if the adjacent cabinetry meets the airflow venting requirements critical to refrigerator performance. A Fully Integrated Grille installation has no visible air gap because the grille extends upward to the soffit or upper cabinet.

IMPORTANT:

■ A Fully Integrated Grille installation requires a minimum of 6"

(15.24 cm) of open space above the refrigerator. This space must not be blocked in any way, including by soffits.

■ Both Standard and Fully Integrated Grille installations can be

achieved with either a 24" (60.9 cm) or 25" (63.5 cm) deep opening.

■ A full height grille is used to achieve a Fully Integrated Grille

installation. Use the integrated bracket (provided with refrigerator) to attach the full height grille.

NOTE: A top grille filler is not required with a full height grille.

Integrated Grille Bracket

Fully Integrated Grille Installation—Side View

Fully Integrated Grille Installation Options

Option 1—Open to Ceiling

A. False front (optional)

B. Airflow

Option 2—False Front (cabinet face only)

C. Full height grille D. Door panel

Standard Integrated Grille

Installation Requirements

IMPORTANT:

■ A Standard Integrated Grille installation can be achieved with

either a 24" (60.9 cm) or 25" (63.5 cm) deep opening.

■ Use the standard grille bracket (provided with refrigerator) to

attach the standard grille.

■ The grille panel height, shown in the “Standard Integrated

Grille Installation—Side View” graphic, allows for an air gap critical to refrigerator performance.

Standard Grille Bracket

Standard Integrated Grille Installation—Side View

Standard Integrated Grille Installation—Full Product View

C. Airflow

Panel Kit Installation

Requirements

See the “Models” section to see the panel kit options available for your model.

IMPORTANT:

■ A panel kit installation can be achieved with either a 24"

(60.9 cm) or 25" (63.5 cm) deep opening.

■ A standard grille is used to achieve a panel kit installation. Use

the standard grille bracket (provided with refrigerator) to attach the standard grille.

A. Top grille filler B. Soffit C. Airflow

D. Grille panel

E. Door panel

■ The grille panel height, shown in the “Panel Kit Installation—

Side View” graphic, allows for an air gap critical to refrigerator performance.

Standard Grille Bracket

Panel Kit Installation—Side View

Freezer

Door Panel

Refrigerator

Door Panel

74¹⁄₄"

(188.6 cm)

Pinch Hazard

Installation of door panels with less than a ³⁄₈" (0.95 cm) gap between the door panel and the adjacent cabinet increases the risk of potential pinching.

CAUTION

⁵⁄₈"

(16.83 cm)

Top Grille Panel

■ The required thickness for all panels is ³⁄₄" (1.91 cm).

■ This installation does not require filler or backer panels.

Custom Wood Overlay Panel

Dimensions

Door Panels

A. Soffit B. Airflow

C. Grille panel D. Door panel

Panel Kit Installation—Full Product View

Custom Wood Overlay Panels

Custom wood overlay panels allow you to blend the exterior of your refrigerator into the overall kitchen décor, and to use custom handles for additional design flexibility.

In some cases, your cabinet manufacturer may choose to work with one panel routed for the different dimensions. Follow these panel dimension and placement instructions to be sure that the custom wood overlay panels will fit properly.

IMPORTANT:

■ The weight of the refrigerator door wood overlay panel cannot

exceed 66 lbs (29.9 kg) for 48" models or 65 lbs (29.5 kg) for 42" models.

■ The weight of the freezer door wood overlay panel cannot

exceed 50 lbs (23 kg) for 48" models or 49 lbs (22.2 kg) for 42" models.

■ The weight of the top grille wood overlay panel cannot exceed

8 lbs (3.6 kg) for 48" models or 7 lbs (3.2 kg) for 42" models.

Model 42 48 Reveal ³⁄₈" ¹⁄₈" ³⁄₈" ¹⁄₈"

A 17⁹⁄₁₆"

(44.61 cm)

B 23⁹⁄₁₆"

(59.85 cm)

17¹³⁄₁₆" (45.24 cm)

23¹³⁄₁₆" (60.48 cm)

20¹⁄₁₆" (50.96 cm)

27¹⁄₁₆" (68.74 cm)

20⁵⁄₁₆" (51.59 cm)

27⁵⁄₁₆" (69.37 cm)

Grille Panel

Fully Integrated Grille Installation—Full Height Grille— Open Soffit

Model 42 48 Reveal ³⁄₈" ¹⁄₈" ³⁄₈" ¹⁄₈"

C 41¹⁄₄"

(104.78 cm)

41³⁄₄" (106.05 cm)

47¹⁄₄" (120.02 cm)

47³⁄₄" (121.29 cm)

Standard Grille Installation—Flush Grille—Open or

³⁄₄"

(14.55 cm)

Top Grille Panel

1" (2.54 cm)

Top Grille Filler

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

Closed Soffit

Model 42 48 Reveal ³⁄₈" ¹⁄₈" ³⁄₈" ¹⁄₈"

D 41¹⁄₄"

(104.78 cm)

E 41¹⁄₄"

(104.78 cm)

IMPORTANT: The grille panel height, shown in the “Standard Integrated Grille Installation—Side View” graphic, allows for an air gap critical to refrigerator performance.

41³⁄₄" (106.05 cm)

47¹⁄₄" (120.02 cm)

47³⁄₄" (121.29 cm)

Move the Refrigerator into House

INSTALLATION

INSTRUCTIONS

Unpack the Refrigerator

IMPORTANT:

■ Do not remove the film covering until the refrigerator is in its

operating location.

■ All four leveling legs must contact the floor to support and

stabilize the full weight of the refrigerator.

■ Keep the cardboard shipping piece or plywood under the

refrigerator until it is installed in the operating location.

1. Remove and save the literature package and hardware kit

located inside the refrigerator. Remove and save the literature, grille, and trim taped to the outside of the refrigerator.

NOTE: Do not remove tape and door bracing until the refrigerator is in its final location.

1. Place an appliance dolly under the left side of the refrigerator

as shown. Place the corner posts from the packing materials over the trims as appropriate. Slowly tighten the strap.

2. Place pieces of the shipping carton on the floor when rolling

the dolly and refrigerator into the house. Move the refrigerator close to the built-in opening.

3. Place top of cardboard carton or plywood under refrigerator.

4. Stand the refrigerator up. First, place the left bottom edge of

the refrigerator on the floor, stand the refrigerator upright and then lower the right-hand side of the refrigerator to the floor.

5. Reassemble the trim and top grille after the dolly has been

removed from the refrigerator.

Install Anti-Tip Boards

IMPORTANT:

■ If a solid soffit is not available, anti-tip boards must be

installed.

■ It is recommended that boards be installed before the

refrigerator is installed.

■ Boards must be long enough to fully cover the width of the

compressor cover.

■ Place the boards so that the bottom surfaces of the boards

are 84" (213 cm) from the floor.

■ During installation, raise the refrigerator up until the top of the

refrigerator is making contact with the bottom of the anti-tip boards. Do not crush the compressor cover when raising the rear leveling legs.

NOTE: The foam gasket, on top of the compressor cover, will

2" (5 cm)

84"

(213.4 cm)

A B

DEF

compress to fit under the anti-tip board(s). There is no need to trim the gasket.

To Install Anti-tip Boards

1. Mark the stud locations on rear wall.

2. Securely attach two 2" x 4" x 32" (5 cm x 10 cm x 81 cm)

boards to wall studs behind refrigerator. Use six #8 x 3" (7.6 cm) (or longer) wood screws. The wood screws must be screwed into the studs at least 1½" (3.8 cm). The boards must overlap the compressor cover.

2. Connect the flexible, codes approved water supply line to the

water shutoff valve by threading the provided nut onto the shutoff valve as shown.

A. Two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards B. Attach to studs with six #8 x 3" (7.6 cm) screws. C. Compressor cover D. Distance from bottom of anti-tip boards to floor

Connect the Water Supply

Read all directions before you begin. IMPORTANT: If you turn the refrigerator on before the water line is

connected, turn the ice maker OFF.

Connect to Water Line

Parts Needed

■ Minimum 7 ft (2.13 m) flexible, codes approved water

supply line

Style 1—Shutoff Valve Connection

NOTE: If your water line connection does not look like Style 1, see

“Style 2—Copper Line Connection.”

1. Unplug refrigerator or disconnect power supply. IMPORTANT:

■ There is not enough clearance to achieve a flush installation if

a water shutoff valve is located in the wall behind the refrigerator. The water shutoff should be located in the base cabinet on either side of the refrigerator.

■ Before attaching the tubing to shutoff valve, flush the main

water supply line to remove particles and air in the water line. Allow enough flow so that water becomes clear. Flushing the water line may help avoid filters and/or water valves from becoming clogged.

A. Bulb B. Nut

C. Water tubing

3. Place the end of the tubing into a bucket, and turn shutoff

valve ON.

4. Check for leaks. Tighten any nuts or connections (including

connections at the valve) that leak.

Style 2—Copper Line Connection

NOTE: If there is a water supply line that meets the specifications

in “Water Supply Requirements,” proceed to “Connecting to Refrigerator.” If not, use the following instructions to connect to the household cold water supply.

1. Unplug refrigerator or disconnect power.

2. Turn OFF main water supply. Turn ON nearest faucet long

enough to clear line of water.

3. Locate a ½" to 1¹⁄₄" (1.25 cm to 3.18 cm) vertical cold water

pipe near the refrigerator.

IMPORTANT:

■ Make sure it is a cold water pipe.

■ Horizontal pipe will work, but drill on the top side of the

pipe, not the bottom. This will help keep water away from the drill and keep normal sediment from collecting in the valve.

4. Determine the length of copper tubing you need. Measure

from the connection on the refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5. Using a cordless drill, drill a ¹⁄₄" (6.35 mm) hole in the cold

water pipe you have selected.

A. Cold water pipe B. Pipe clamp C. Copper tubing D. Compression nut

E. Compression sleeve F. Shutoff valve

G. Packing nut

6. Fasten the shutoff valve to the cold water pipe with the pipe

(2.54 cm)

7" (17.78 cm)

(15.2 cm)

Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

clamp. Be sure the outlet end is solidly in the ¹⁄₄" (6.35 mm) drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so washer makes a watertight seal. Do not overtighten.

IMPORTANT: Before attaching the tubing to shutoff valve, flush the main water supply line to remove particles and air in the water line. Allow enough flow so that water becomes clear. Flushing the water line may help avoid filters and/or water valves from becoming clogged.

7. Slip the compression sleeve and compression nut on the

copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten the clamp or the sleeve. This will crush the copper tubing.

8. Turn off the shutoff valve on the water pipe. Coil the copper

tubing.

9. Connect the flexible, codes approved water supply line to the

water shutoff valve by threading the provided nut onto the shutoff valve.

10. Place the end of the tubing into a bucket, and turn shutoff

valve ON.

11. Check for leaks around the saddle valve. Tighten any nuts or

connections (including connections at the valve) that leak.

Connect to Refrigerator

Parts Supplied

■ ¹⁄₄" to ¹⁄₄" (6.35 mm to 6.35 mm) male-to-male coupling

5. Connect the 7 ft (2.13 m) flexible codes approved water

supply line to the refrigerator. NOTE: If the main water shutoff valve is behind the

refrigerator, a secondary water shutoff valve may be installed in line with the water supply line at the front of the product.

A. Household water line B. Nut (purchased) C. Ferrule (purchased) D. Coupling

E. Bulb F. N u t

G. Refrigerator water tubing

6. Turn on the water supply valve and check all connections for

leaks.

Plug in Refrigerator

NOTE: The flexible, codes approved water supply line should connect to the supply valve through the floor.

1. Unplug the refrigerator or disconnect power.

2. Connect the 7 ft (2.13 m) flexible codes approved water tube

to the water supply valve.

3. Flush the main water supply line to remove particles and air in

the water line. Allow enough flow so that water becomes clear.

4. Tape the 7 ft (2.13 m) flexible codes approved water supply

line to the floor, 7" (17.78 cm) from the left side of the refrigerator. Tape along the length of the tubing, which will allow it to pass beneath the refrigerator without interference.

NOTE: Allow a minimum of 26" (66.04 cm) of flexible codes approved water supply line to be loose at the front of the refrigerator for connecting to the refrigerator.

1. Set control switch at top of cabinet to the OFF position.

2. Plug into a grounded 3 prong outlet.

Install Side Trims

A B

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

¹⁄₈"

(3.18 mm)

³⁄₈"

(9.53 mm)

³⁄₄"

(1.9 cm)

The side trims cover the space between the refrigerator and the adjacent cabinets. There is a trim piece taped to each side of the refrigerator. Install each trim piece to the side of the refrigerator to which it is taped.

1. Remove the tape attaching the trim pieces to the sides of the

refrigerator. Set the trim pieces aside. IMPORTANT: Custom wood panel (with ¹⁄₈" gap) installations

only - The bulb-shaped edge of the side trim piece will interfere with the panels. Peel the bulb-shaped, long edge from the trim piece and discard. See the “Top View” graphic later in this section.

2. Remove the four screws from the side of the refrigerator

cabinet.

Move Refrigerator to Final

Location

IMPORTANT:

■ A flush installation is NOT possible with a 24" (60.9 cm) deep

opening.

■ To avoid floor damage, make sure levelers are raised (not

touching floor) and refrigerator is on rollers before moving.

■ Use the installation block, attached to the door hinge, as a

reference to make sure the refrigerator is pushed back far enough into the opening, so that when the panels are installed they will be flush with the adjacent cabinets.

■ After the refrigerator is leveled and aligned, remove the

installation block from the door hinge and use it to check the spacing between the panels and adjacent cabinets.

NOTE: The installation block is designed to provide accurate spacing for ³⁄₄" (1.9 cm), ³⁄₈" (9.53 mm) and ¹⁄₈" (3.18 mm).

A. Side trim screws

3. Using the original holes and the screws removed in Step 2,

fasten the side trim to the refrigerator cabinet. NOTE: Make sure to fasten each trim piece to the side of the

refrigerator cabinet from which it was removed. The bulbshaped edge should be forward with the notch at the top, as shown.

Top View

A. Side trim B. Adjacent cabinet

C. Door D. Bulb-shaped edge

1. Place top of cardboard carton or plywood under refrigerator.

Remove dolly.

2. Move the refrigerator straight back and evenly into the

opening. Be sure that the water tubing is not kinked and the power supply cord is on top of the refrigerator.

NOTE: If the power supply cord is behind the refrigerator, it will not install properly.

3. Make sure the installation block is flush with the adjacent

³⁄₄" (1.9 cm)

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

A B

2" (5 cm)

84"

(213.4 cm)

cabinets. NOTE: To achieve a flush installation, it is critical to verify a ³⁄₄"

(1.9 cm) depth from the front face of the adjacent cabinetry to the refrigerator.

A. Adjacent cabinet or wall B. Installation block

C. Face of refrigerator

Level and Align Refrigerator

2. Adjust the leveling legs to level and align the refrigerator from

left to right and front to back so that the refrigerator is level and aligned with the cabinets.

3. Continue adjusting the leveling legs until the top of the

refrigerator is making contact with the bottom of the solid soffit, or the bottom of the anti-tip boards, if anti-tip boards were used. Do not crush the compressor cover.

IMPORTANT: Adjust in small increments to keep from damaging the cabinet trim and causing problems with the door alignment or top grille fit. To avoid damage to the cabinet or leveling legs, do not apply more than 50 inch-pounds (5.65 Nm) of torque to the leveling bolts. The leveling legs can be extended to a maximum of 1¹⁄₄" (3.18 cm) below the rollers.

IMPORTANT: All four leveling legs must contact the floor to support and stabilize the full weight of refrigerator. Rollers are for moving the refrigerator, not for permanent support.

After moving the refrigerator to its final location:

1. Use a ⁵⁄₁₆" socket driver to turn the leveling bolts clockwise to

extend the legs to the floor as shown. The rollers should be off the floor.

A. Two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards

B. Attach to studs with six #8 x 3" (7.6 cm) screws. C. Compressor cover D. Distance from bottom of anti-tip board to floor

4. After leveling the refrigerator, again use a straight edge or 4-ft

level a cross the front of the refrigerator installation blocks to the cabinets to check that the refrigerator is still flush.

Install Refrigerator and Panels

IMPORTANT: Jenn-Air is not responsible for the removal or addition of molding or wood overlay panels that would not allow access to the refrigerator for service.

Install Top Grille Filler (standard installation only)

IMPORTANT: The grille panel height allows the necessary airflow

for refrigerator performance. The top grille filler hides the upper compartment cover behind the top grille. If you choose to modify the recommended grille panel dimensions, performance will be compromised.

Custom Wood Panel Models

1. In the custom made (1" x width of grille panel) wood filler

piece, drill a hole NOTE: Make sure the hole is centered in the 1" thickness of

the wood piece.

2. Using slotted hex-head screws (provided with refrigerator),

fasten an “L” bracket to each end of the wood filler piece.

3. Using hex-head blunt screws (provided with refrigerator),

attach the “L” brackets to the top grille mounting plates.

¹¹⁄₁₆" from each edge.

A. Rear leveling bolt B. Front leveling bolt

4. Adjust the “L” brackets, so that the wood filler piece is flush

WARNING

Excessive Weight Hazard Use two or more people to move and install panels. Failure to do so can result in back or other injury.

with the bottom of the soffit. Completely tighten the screws.

A. Top grille filler B. “L” bracket C. Grille mounting plate

Side View

2. Using the slotted hex-head screws (provided with refrigerator),

attach the top grille vent to the soffit.

A. Top grille vent B. Slotted hex-head screw

Side View

A. Top grille filler B. Soffit C. Airflow

D. Grille panel

E. Door panel

Panel Kit Models

1. Align top grille vent (provided in the door kit) with the bottom

edge of the soffit. Use as a template, and mark where to drill the holes.

A. Soffit B. Airflow

C. Grille panel D. Door panel

Predrill Panels (custom wood panels only)

IMPORTANT: The custom panel template shipped with the

refrigerator can be used for either a ³⁄₈" (0.95 cm) or a ¹⁄₈" (0.32 cm) reveal installation.

■ The drilling templates are used only for custom wood overlay

panels.

■ The drilling templates are double-sided.

■ The drilling holes are precut into the template.

1. On the template, locate the diagram of your refrigerator. Then,

follow the letters and colored arrows to correctly place the drilling template on the back side panels.

NOTE: Check the direction of the arrows to determine which holes to mark when the template is aligned at the top of the panel and which holes to mark when the template is aligned at the bottom of the panel.

2. Predrill pilot holes into the wood rails bordering the doors and

top grille panels.

Prepare Panels (custom wood panels only)

Door Panels

1. Place panels on a firm, covered, flat surface with the front

facing down.

2. Locate the 2 predrilled holes in the handle side edge of the

door panel.

3. Using the installation block as a guide for depth, attach a

shoulder washer with a hex head pointed screw (both provided with refrigerator) into the predrilled door panel (2 per door).

5. Attach a mounting bracket to the top edge of each door panel

by placing the large end of the keyhole slot over the screws and sliding the bracket so that the screws are centered in the slots.

NOTE: Start with the screws in the center of the slots as shown, then move the door panel, as necessary, to align.

A. Door panel B. Mounting bracket

Top Grille Panel

1. Using the slotted hex-head screws (provided with refrigerator),

attach a mounting bracket to each side of the top grille panel. IMPORTANT: See the “Parts Provided” section to select the

brackets designated for your installation.

■ Use the Integrated Grille brackets for a Fully Integrated

Grille installation with a full height grille.

A. Shoulder washer and

hex head pointed screw

B. Installation block

4. For the mounting bracket, insert the hex-head pointed screws

(provided with refrigerator) into the wood at the top of the door panels where they were predrilled.

NOTE: It is critical to use the ⁵⁄₈" screw, the longest length provided, to attach the bracket to the top of the door panel.

A. U-shaped hole B. Slot

■ Use the Standard Grille brackets for a Standard Integrated

Grille Installation with a closed or open soffit.

A. Top grille brackets B. White, grille trim piece

(taped to refrigerator door)

2. Using round-head screws (provided with refrigerator), attach

the grille trim piece to the bottom of the grill panel. NOTE: The grille trim is preinstalled on the panel kits.

Remove Trim Pieces

A B

B BA

1. Remove all tape and door bracing from the refrigerator and

freezer doors.

2. Open the refrigerator and freezer doors.

3. Remove the hinge cover pieces from the top and bottom of

the door to expose the holes in the hinges.

2. Lower the panel bracket down onto the adjustment pins at the

top of the door.

A. Hinge cover pieces

Install Door Panels

IMPORTANT: Use the foam packaging to prop and hold the

door(s) open while installing a door panel.

1. Align the two shoulder washers, on the back of the door

panel, with the “J” slots on the side of the refrigerator door. Slide the panel onto the door.

A. Door panel

B. Mounting bracket

C. Adjustment pins

3. Repeat steps 1 through 2 to install the second door panel.

4. Using slotted hex-head screws (provided with refrigerator),

attach the mounting bracket (factory installed), located at the bottom of the refrigerator and freezer doors, to the respective door panels. Do not fully tighten the screw.

A. Bottom hinge B. Mounting bracket

Install Top Grille Panel

A. Shoulder washer and hex head pointed screw B. “J” pocket

A. Top grille panel B. Cabinet sides

+ 47 hidden pages