Jenn-Air JMV9196CB, JMV9196CS User Manual
JENN-AIR® DETAILED PLANNING DIMENSIONSJENN-AIR® DETAILED PLANNING DIMENSIONS
Back of
Cabinet
E
D
C
Back of
Cabinet
A
E
D
C
B
OVER-THE-RANGE MICROWAVE OVENS
JMV9196C, JMV8208C – 297⁄8" x 179⁄16" x 169⁄16 – 175⁄16"
PRODUCT DIMENSIONS
1 of 2
FRONT VIEW
A
MODEL #
JMV9196C
JMV8208C
in cm
Overall width 297⁄8 76.0
B
A
Overall height 179⁄16 44.6
B
Depth without door 16 40.6
C
Depth with door
D
Depth with door open 90° 447⁄16 112.9
E
1615⁄16
± 3⁄8
43.0
±1.0
A
C
D
E
TOP VIEW
SIDE VIEW
E
D
C
Back of
Cabinet
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
85 62 AdZw815
JENN-AIR® DETAILED PLANNING DIMENSIONSJENN-AIR® DETAILED PLANNING DIMENSIONS
Side
Cabinet
E
e
A
C
B
D
Side
Cabinet
E
OVER-THE-RANGE MICROWAVE OVENS
JMV9196C, JMV8208C – 297⁄8" x 179⁄16" x 169⁄16 – 175⁄16"
OPENING/CLEARANCE DIMENSIONS
MODEL #
e
Width of cabinet opening (min.)* 30 76.2
A
Height from cooking surface
B
to floor
Suggested distance from
top of cabinet opening to
C
cooking surface
A
C
D
Height from floor to top of cabinet
D
opening (B + C = D)
Depth of upper cabinet (min.-max.) 12-14
E
e
Recommended electrical connection location
* Optional filler kits available for width of 36" (91.4 cm)
Black: 8171337; Stainless Steel: 8171339
2 of 2
JMV9196C
JMV8208C
in cm
— —
30 76.2
— —
30.5-
35.6
B
ELECTRICAL REQUIREMENTS
120 volt, 60 Hz, AC only, 15- or 20-amp fused, electrical supply
is required. A time-delay fuse or dedicated circuit is recommended.
Do not use an extension cord.
VENTING REQUIREMENTS
The microwave oven is factory set for recirculating ventilation.
FRONT VIEW
To vent through the roof or wall, refer to installation instructions
for further information.
LOCATION REQUIREMENTS
Support structure must be able to support 150 lb (68 kg) including
Side
Cabinet
microwave oven and upper cabinet including contents.
Mounting plate must attach to a minimum of one 2" x 4"
(5.1 cm x 10.2 cm) wall stud.
Minimum distance between a fixed wall on the hinged-side
of the door and the microwave oven is 6" (15.2 cm).
E
Mounting Plate
SIDE VIEW BACK VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
85 62 AdZw815
Loading...