Jenn-Air JMV9186W, JMV8208W Dimension Manual
JENN-AIR® DETAILED PLANNING DIMENSIONS
Back of
Cabinet
J
I
H
G
K
L
F
Back of
Cabinet
A
J
I
H
G
K
L
F
B C
D
E
F
OvER-ThE-RANGE MIcROwAvE OvENS
JMV9186W, JMV8208W – 297⁄8" x 171⁄4" x 171⁄2"
PRODUcT DIMENSIONS
1 of 4
FRONT VIEW
A
B C
A
JMV9186W
D
E
F
MODEL #
Overall width 29
A
Width of door 24
B
Width of control panel 5
C
Height of trim 3 7.6
D
Height of door 13 33.1
E
Overall height 17
F
Depth without door 14
G
Depth with door 15
H
Depth with handle
Pro-Style
I
®
Stainless 181⁄8 45.9
Euro-Style (color-coordinating)
Depth with door open 90° 39 99.1
G
H
I
J
J
Depth of ventilation/lamp housing 12
K
Height of door and trim 16
L
*Optional filler kits available for width of 36" (91.4 cm).
JMV8208W
in cm
7
⁄8 76.0
1
⁄2 62.3
1
⁄4 13.3
1
⁄4 43.8
1
⁄8 36.0
7
⁄8 40.2
1
⁄2 44.5
17
1
⁄4 31.0
1
⁄4 41.3
TOp VIEW
J
I
H
K
SIDE VIEW
Product dimension, cutout and installation specifications are provided for planning purposes only. Before installing
any product, be sure to verify cutout dimensions and electrical/gas connections as actual product dimensions may vary.
G
L
F
Back of
Cabinet
JRC120060A 07/2012
JENN-AIR® DETAILED PLANNING DIMENSIONS
Side
Cabinet
E
e
A
C
B
D
Side
Cabinet
E
OvER-ThE-RANGE MIcROwAvE OvENS
JMV9186W, JMV8208W – 297⁄8" x 171⁄4" x 171⁄2"
OPENING/cLEARANcE DIMENSIONS
MODEL #
Width of cabinet opening (min.) 30 76.2
A
Height from cooking surface
B
to floor
Suggested distance from
top of cabinet opening to
C
cooking surface
Height from floor to top of cabinet
D
opening (B + C = D)
Depth of upper cabinet (min.-max.) 12-14
E
e
Recommended electrical connection location
ELECTRICAL REQUIREMENTS
120 volt, 60 Hz, AC only, 15- or 20-amp fused, electrical supply
is required. A time-delay fuse or dedicated circuit is recommended.
Do not use an extension cord.
VENTING REQUIREMENTS
The microwave oven is factory set for recirculating ventilation.
To vent through the roof or wall, refer to installation instructions
for further information.
LOCATION REQUIREMENTS
Support structure must be able to support 150 lb (68 kg) including
microwave oven and upper cabinet including contents.
Mounting plate must attach to a minimum of one 2" x 4"
(5.1 cm x 10.2 cm) wall stud.
Minimum distance between a fixed wall on the hinged-side
of the door and the microwave oven is 6" (15.2 cm).
FRONT VIEW
Side
Cabinet
e
A
C
D
B
2 of 4
JMV9186W
JMV8208W
in cm
— —
30 76.2
— —
30.5-
35.6
E
SIDE VIEW BACK VIEW
Product dimension, cutout and installation specifications are provided for planning purposes only. Before installing
any product, be sure to verify cutout dimensions and electrical/gas connections as actual product dimensions may vary.
Mounting Plate
JRC120060A 07/2012
Loading...