Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
injury to persons, or damage when using the oven, follow
basic precautions, including the following:
■
Proper Installation – Be sure the oven is properly installed
and grounded by a qualified technician.
■
Never Use the Oven for Warming or Heating the Room.
■
Do Not Leave Children Alone – Children should not be left
alone or unattended in area where oven is in use. They
should never be allowed to sit or stand on any part of the
oven.
■
Wear Proper Apparel – Loose-fitting or hanging garments
should never be worn while using the oven.
■
User Servicing – Do not repair or replace any part of the
oven unless specifically recommended in the manual. All
other servicing should be referred to a qualified technician.
■
Storage in Oven – Flammable materials should not be
stored in an oven.
■
Do Not Use Water on Grease Fires – Smother fire or flame
or use dry chemical or foam-type extinguisher.
■
Use Only Dry Potholders – Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
■
Use Care When Opening Door – Let hot air or steam
escape before removing or replacing food.
■
Do Not Heat Unopened Food Containers – Build-up of
pressure may cause container to burst and result in injury.
To reduce the risk of fire, electrical shock,
follow instructions.
can be killed or seriously injured if you don't
You
instructions.
■
Keep Oven Vent Ducts Unobstructed.
■
Placement of Oven Racks – Always place oven racks in
desired location while oven is cool. If rack must be moved
while oven is hot, do not let potholder contact hot heating
element in oven.
■
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN – Heating elements may be hot
even though they are dark in color. Interior surfaces of an
oven become hot enough to cause burns. During and after
use, do not touch, or let clothing or other flammable
materials contact heating elements or interior surfaces of
oven until they have had sufficient time to cool. Other
surfaces of the oven may become hot enough to cause
burns – among these surfaces are oven vent openings and
surfaces near these openings, oven doors, and windows of
oven doors.
For self-cleaning ovens:
■
Do Not Clean Gasket – The gasket is essential for a good
seal. Care should be taken not to rub, damage, or move
the gasket.
■
Do Not Use Oven Cleaners – No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven.
■
Clean Only Parts Listed in Manual.
■
Before Self-Cleaning the Oven – Remove broiler pan and
other utensils.
follow
SAVE THESE INSTRUCTIONS
State of California Proposition 65 Warnings:
WARNING: This product contains a chemical known to the State of California to cause cancer.
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
3
PARTS AND FEATURES
This manual covers different models. The oven you have purchased may have some or all of the items listed. The locations and
appearances of the features shown here may not match those of your model.
A
B
L
C
K
D
J
I
E
H
G
F
A. Electronic oven control
B. Oven vent
C. Model and serial number plate
(on center vent under control panel)
D. Broil element
E. Gasket
F. Bottom vent
G. Lower oven (on double oven models)
H. Hidden bake element
I. Convection element and fan
J. Oven lights (left side not shown)
K. Oven door lock latch
L. Oven light switch
Parts and Features not shown
Temperature probe jack
Tem p eratur e p robe
Oven racks
4
ELECTRONIC OVEN CONTROL
This manual covers different models. The oven you have purchased may have some or all of the items listed. The locations and
appearances of the items shown here may not match those of your model.
The oven's controls are accessed through its control panel.
NOTE: Due to the sensitivity of the control panel, we have provided special instructions for cleaning. See “General Cleaning” section for
cleaning instructions.
Single Oven Control Panel
A
B
C
D
A. Touch panel
B. Light
C. Display
Double Oven Control Panel
A
B
M
A. Touch panel
B. Upper oven
C. Kitchen timer
D. Display
E. Number keypad
G
J
C
L
I
D. Number keypad
E. Kitchen timer
F. Quickset pads
D
K
F. Cancel upper oven
G. Cancel lower oven
H. Quickset pads
H
F
H
IJ
E
G. More
H. Start
I. Back
J. Cancel oven
E
I. More
J. Start
K. Back
L. Light
M. Lower oven
F
G
5
Control Panel
A
C
The control panel houses the control menu and function controls.
The control pads are very sensitive, and require only a light touch
to activate.
For more information about the individual controls, see their
respective sections in this manual.
Welcome Guide
This appears on your display the first time the oven is powered
up. The Welcome Guide allows you to set up your new oven.
After every selection, a single beep will sound.
1. Select your language by pressing the quickset pad next to
English or French.
2. Select the temperature units by pressing the quickset pad
next to Fahrenheit or Celsius.
3. Select the clock units by pressing the quickset pad next to
AM/PM or 24 Hour (Military Time).
4. Choose Yes or No to have the daylight saving time
automatically updated.
5. Enter current time (00:00) using the number keypad and
choose AM or PM by pressing the quickset pad next to the
desired choice. Select Next to move to next screen.
6. Enter current date (MM/DD/YYYY) using the number keypad,
and press the quickset pad next to the Next option.
7. Select a screen appearance to match your oven. Press the
quickset pad next to Dark/Blue, Light/Blue, Dark/Orange,
Bronze/White.
8. Review your settings and press the quickset pad next to Save
option. A message will show: “You have selected a new
theme. The oven will reset momentarily. Please wait....” It will
take 1 minute to restart with the new settings set.
9. See the “Setup Menu” section for more detailed information.
Display
When the oven is in use (active mode), the display shows the
time, mode, oven temperature and timer, if set. If the timer is not
set, the Set Timer Option will also be displayed.
After approximately 2 minutes of inactivity, the display will go into
standby (sleep) mode, and the backlight of the display will dim.
When the oven is in operation, the display will remain active.
During programming, the display shows menus and the
appropriate selections for the respective cooking function.
Display Screen
The LCD display screen is used to make menu selections, adjust
settings and input commands.
Select mode:
Bake
Broil
BackStartMore
A. Title/description region
B. Menu and selection/settings input region
C. Command input region
Menu selections and input adjustments are made in the center
portion of the screen, and the command inputs (Back, More or
Start) are made by the bottom buttons. Screen titles and
descriptions are displayed in the top portion of the screen. A light
to medium pressure touch of the fingertip will activate the menu
selection.
Auto Convection
Conversion
MultiMode
Convection
B
1 of 3
Main Menus
From the Main Menu, all automatic cooking programs can be activated; all manual cooking can be programmed; settings can be
programmed; settings can be adjusted; and instructions, preparation and tips can be accessed.
Convection Model
Select mode:
Bake
Broil
BackStart
Select mode:
Proof
Rapid Proof
Back
StartMore
Auto Convection
Conversion
MultiMode
Convection
1 of 3
More
Keep Warm
Probe
2 of 3
Convect Bake
Convect Bake
(Rapid Preheat)
Back
Back
My Creations
Self Clean
Select mode:
Start
Select mode:
Start
Convect Roast
Convect Broil
Button Lock
Setup Menu
1 of 2
More
3 of 3
More
Convect Slow Roast
Convect Pastry
Back
Select mode:
Convect Frozen Pizza
Start
2 of 2
More
6
Non-convection Model
Select mode:
Bake
Broil
BackStart
Keep Warm
My Creations
1 of 22 of 2
More
Self Clean
Button Lock
Back
Menu Demonstration
The following demonstrates a sequence showing how to cook
from the Main Menu using a timed bake cycle.
This manual covers different models. The locations and
appearances of the features shown may not match those of your
model.
1. Touch the START button or touch UPPER/LOWER OVEN
button (on double oven models).
2. From the Select Mode menu, touch the quickset pad next to
Bake.
Select mode:
Bake
Broil
BackStartMore
3. From the Temperature menu, use the number keypad to enter
desired cooking temperature.
Auto Convection
Conversion
Multimode
Convection
1 of 3
Select mode:
Setup Menu
Start
More
4. Press the quickset pad next to Set Cook Timer. Enter cooking
time using the number keypad to set a timer to alert you
when cooking ends. The oven will turn off when the cook time
expires. See “Cook Timer” section for additional information.
BakeCook Timer
Keep Warm
BackStart
when done: Off
350
00:00
:00
HR: MIN: SEC
Delay Start
5. If desired, the Keep Warm and Delay Start options can be
programmed from the Cook Timer screen. See the “Keep
Warm™” and “Delay Start™” sections for additional
information.
6. Press START to begin preheating oven.
7. Place food in oven when the preheat signal sounds. The
screen will also prompt you when to insert food. If a delay
start is programmed, place food in oven when setting the
mode.
BakeCook Timer
BackStart
Temperature
350
˚
Range: 170-550
˚
Set Cook Timer
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
NOTE: Do not use Delay Start for items that require a
preheated oven, such as cakes, cookies and breads. If food
is in the oven during preheat, it may become overcooked.
8. To change the temperature or cook time while the oven is
active, touch the appropriate quickset pad, make the
adjustment, and select Start.
9. Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER
on double models) to turn off the oven.
7
Setup Menu
Your oven provides you with the ability to control several of the
default settings and access information through the on screen
display. These include: Clock, Sound, Screen Appearance,
Language, Temp Units, Service Info, Sabbath Mode, Oven
Calibration and Restore Defaults.
To Access Setup Menu:
1. Press START or Oven.
2. From the Select Mode menu, press the MORE button until
you see the Setup Menu choice.
3. Touch the quickset pad next to the Setup Menu choice.
Clock
This clock can be used in 12-hour or 24-hour format.
At any time desired, press BACK to return to the Setup Menu.
1. From the Setup menu, touch the quickset pad next to Clock.
2. From the Clock menu, touch the quickset pad next to Time.
3. Enter current time (--:--). Choose AM or PM.
4. Select SAVE. This will return you to the Clock settings menu.
5. From the Clock menu, touch the quickset pad next to DATE.
6. Enter current date (MM/DD/YYYY). Select ON or OFF for
Daylight Savings Adjust.
7. Select SAVE. This will return you to the Clock settings menu.
8. From the Clock menu, touch the quickset pad next to Format.
9. Select time format: AM/PM or 24 hour (Military Time).
10. Select SAVE. This will return you to the clock display screen.
11. From the Setup Menu, touch the quickset pad next to Clock.
12. From the Clock menu, touch the quickset pad next to Clock
Style.
13. Select clock style on idle screen: Analog or Digital.
14. Select SAVE. This will return you to the clock display screen.
Sound
1. From the Setup menu, touch the quickset pad next to Sound.
2. From the Sound menu, touch the quickset pad next to Timer
Volume.
3. Adjust the Timer Volume by touching the left quickset pad to
decrease the volume, or the right quickset pad to increase
the volume. To turn Timer Volume off, touch the left quickset
pad until Off is reached.
4. Select SAVE. This will return you to the Sound settings menu.
5. From the Sound menu, touch the quickset pad next to Button
Volume.
6. Adjust Button volume by touching the left quickset pad to
decrease the volume and the right quickset pad to increase
the volume. To turn Button Volume off, touch the left quickset
pad until Off is reached.
7. Select SAVE. This will return you to the Sound menu.
8. From the Sound menu, select ON or OFF on Startup/
Shutdown Sounds.
9. Press BACK to return to the Setup menu.
Screen Appearance
1. From the Setup menu, touch the quickset pad next to Screen
Appearance.
2. From the Appearance menu, touch the quickset pad next to
Brightness.
3. Adjust the screen brightness by touching the left quickset
pad to select dimmer and the right quickset pad to select
brighter.
4. Select SAVE. This will return you to the Screen Appearance
settings menu.
5. From the Screen Appearance menu, select ON or OFF on
Animation. When on, the animation (gradient and heat waves)
are shown while the oven is heating.
6. From the Screen Appearance Menu, touch the quickset pad
next to Theme.
7. Select an appearance to match your oven: Dark/Blue, Light/
Blue, Dark/Orange, Bronze/White.
8. After selecting a theme, a message will show: “You have
selected a new theme. The oven will reset momentarily.
Please wait....” It will take 1 minute to restart with the new
settings set.
Language
1. From the Setup menu, touch the quickset pad next to
Language.
2. From the Language menu, select your language: English or
French. This will return you to the clock display screen.
Temperature Units
1. From the Setup Menu, touch the MORE button until Temp
Units appears.
2. Touch the quickset pad next to Temp Units.
3. From the Temp Units menu, select temperature units:
Fahrenheit or Celsius.
4. Select SAVE. This will return you to the Setup menu.
8
Service Information
9. On double ovens, repeat steps 1-8 to set the second cavity, if
desired.
1. From the Setup Menu, touch the MORE button until Service
Info appears.
2. Touch the quickset pad next to Service Info.
3. The Jenn-Air service phone number and website are
displayed in the screen.
4. Depending on the oven model, a Demo Mode is available.
This mode will allow you to make selections with various
options without heating the oven. Select ON/OFF to activate
or deactivate the function. When On, it will be indicated at the
bottom of the screen.
5. See “Assistance or Service” section for additional
information.
6. Select SAVE to exit the screen and return to the Setup Menu.
Sabbath Mode
The Sabbath Mode sets the oven to remain in a Bake setting until
turned off. A timed Sabbath Mode can also be set to keep the
oven on for only part of the Sabbath. When the Sabbath Mode is
set, only the number and Start keys will function, no tones will
sound, and the displays will not show messages or temperature
changes.
When the oven door is opened or closed, the oven light will not
turn on or off, and the heating elements will not turn on or off
immediately.
If a power failure occurs when the Sabbath Mode is set, the
oven(s) will remain in Sabbath Mode but will no longer be actively
cooking. When power returns, the display will initially show the
Jenn-Air start-up screen. After a short delay, the display will
return to the Sabbath Mode enable screen. Touch the quickset
pad next to “On” to return to the Sabbath Mode setup screen or
touch the quickset pad next to “Off” to disable Sabbath Mode
and return to the clock display screen.
To Use Sabbath Mode:
1. From the Select mode screen, touch the MORE button until
the Setup Menu appears.
2. From the Setup Menu, touch the MORE button until Sabbath
Mode appears. Press the quickset pad next to Sabbath
Mode.
3. From the Sabbath Mode menu, read the instructions on the
screen and press the quickset pad next to On to turn Sabbath
Mode on.
NOTE: Sabbath Mode disables the 12-hour shutoff. All lights
and displays are disabled, so that no visible activity takes
place when the oven door is opened.
4. On double ovens, select the cavity to set up by pressing the
quickset pad next to Upper or Lower.
5. Select Oven Temperature. Use the numbered keypad to enter
a desired cooking temperature. The temperature must be
between 170°F (77°C) and 550°F (288°C) or the default
temperature appears on the screen.
6. Select Next by pressing the quickset pad next to it.
7. If a programmed Cook Time is desired, enter a Cook Time by
using the number keypad. The time length may not exceed
12:00:00. When the timer ends, the oven cavity will stop
heating.
8. Select Next by pressing the quickset pad next to it.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
10. To set a Delayed Start, press the quickset pad next to Delay
Start. See the “Delay Start” section for additional information.
11. Press START to begin heating the oven.
12. Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER
on double oven models) to turn off the oven.
To Disable Sabbath Mode:
When a cook time ends, the Sabbath Mode enable screen will be
displayed. You can also return to the Sabbath Mode enable
screen at any time while using Sabbath Mode by pressing
CANCEL. Touch SABBATH MODE: OFF to disable Sabbath
Mode and return to the Clock display screen. To program a new
cycle, follow steps 1-12 in the “To Use Sabbath Mode” section.
Temperature Change:
The oven temperature can be changed when the oven is in
Sabbath Mode. No tones will sound, and the display will not
change. While the oven is running, pressing a number keypad
and the Start button will change the temperature after a random
delay of between 25 and 40 seconds.
Number keys 1 through 0 represent temperatures. Use the
following chart as a guide.
Number KeypadOven Temperature
1170°F (77°C)
2200°F (93°C)
3225°F (121°C)
4250°F (135°C)
5300°F (149°C)
6325°F (163°C)
7350°F (177°C)
8375°F (191°C)
9400°F (204°C)
0450°F (232°C)
To Change Temperature:
1. Touch the number keypad for the desired temperature from
the chart.
2. Touch S TART.
NOTE: On double ovens, the temperature of both ovens will
change to the new setting if both ovens are operating in
Sabbath Mode.
9
Oven Calibration
Kitchen Timer
1. From the Setup menu, touch the More button until Oven
Calibration appears.
2. Touch the quickset pad next to Oven Calibration.
3. On double models, touch UPPER OVEN or LOWER OVEN to
choose the oven cavity to be checked or calibrated.
4. Adjust the calibration of the oven by choosing the
temperature offset: -1° (if oven is too hot) or +1° (if oven is too
cool).
5. Select Save after entering the desired value.
6. Press START.
Restore Factory Settings
1. From the Setup Menu, touch the More button until Restore
Factory Defaults appears.
2. Touch the quickset pad next to Restore Factory Defaults.
3. The following settings will be lost: Language, Temperature
Units, Clock Settings, Date and Screen Appearance. The
Welcome Guide will appear to help you reset these settings.
See the “Welcome Guide” section for additional information.
This is an independent timer not associated with the cook timers.
1. Press the Kitchen Timer button anytime needed.
2. Enter the desired time (00:00:00) using the number keypad.
3. Press the quickset pad next to Cancel Timer to cancel the
function or press Start.
4. While the Kitchen Timer is running, the timer is minimized to
the bar at the bottom of the screen.
5. To adjust the Kitchen Timer, press the Kitchen Timer button
and choose between Cancel Timer, Hide, or Reset by
pressing the quickset pads next to them.
6. If Cancel Timer is pressed, the timer is canceled and the
panel is closed.
7. If Hide is pressed, the panel is lowered to the appropriate
position. Pressing the Kitchen Timer button will also hide the
panel.
8. If Reset is pressed, the Kitchen Timer is kept open but resets
to (00:00:00); a new value can now be entered.
9. When the Kitchen Timer is complete, a beep will sound.
10. When time expires, it is possible to add extra time by
pressing the quickset pad next to Add More Time or to cancel
the function by pressing the quickset pad next to Cancel
Timer.
11. To add more time, use the number keypad.
12. Press START.
OVEN USE
Odors and smoke are normal when the oven is used the first few
times, or when it is heavily soiled.
During oven use, the heating elements will not remain on, but will
cycle on and off throughout oven operation.
Aluminum Foil
IMPORTANT: To avoid permanent damage to the oven bottom
finish, do not line the oven bottom with any type of foil or liner.
■ For best cooking results, do not cover entire rack with foil
because air must be able to move freely.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off. Exposure to the fumes may result in death to
certain birds. Always move birds to another closed and wellventilated room.
■ To catch spills, place foil on rack below dish. Make sure foil is
at least ½" (1.3 cm) larger than the dish and that it is turned
up at the edges.
10
Positioning Racks and Bakeware
A
IMPORTANT: To avoid permanent damage to the porcelain
finish, do not place food or bakeware directly on the oven door or
bottom.
Roll-Out Rack
The roll-out rack allows easy access to position and remove food
in the oven. The roll-out rack will fit in all positions.
Open Position
RACKS
■ Position racks before turning on the oven.
■ Do not position racks with bakeware on them.
■ Make sure racks are level.
Depending on the oven model, you could have flat, offset and/or
roll-out racks. If “f” is after the rack position, the flat rack should
be used. An “o” after the rack position indicates the offset rack
should be used. An “r” indicates the roll-out rack should be used.
For example: 1o, 3f, 5r indicates the use of the offset rack in rack
position 1, the flat rack in position 3, and the roll-out rack in
position 5. Refer to the section for the mode you are using for
specific rack recommendations.
27" (68.6 cm) Rack Positions
4
3
2
1
30" (76.2 cm) Rack Positions
5
4
3
2
1
A
B
A. Slide rails
B. Sliding shelf
Closed and Engaged Position
B
A. Slide rails
B. Sliding shelf
To Insert Roll-Out Rack
1. Angle rack assembly up and insert into the “V” cutout in the
rack guides of the oven cavity.
2. Keep rack lifted up at an angle and push in to bypass the
lower “V” cutout.
3. Gently slide rack into oven, bypassing the “V” cutouts.
A
BAKEWARE
To cook food evenly, hot air must be able to circulate. Allow
2" (5.0 cm) of space around bakeware and oven walls.
B
A. Rack guide
B. “V” cutout
11
To Remove Roll-out Rack
1. Push the sliding shelf in completely so that it is closed and
engaged with the slide rails.
The oven vent(s) should not be blocked or covered since they
allow the inlet of fresh air into the cooling system. Also, the
bottom vent should not be blocked or covered since it allows the
inlet of fresh air into the cooling system and the outlet of hot air
from the cooling system. Blocking or covering vents will cause
poor air circulation, affecting cooking, cleaning and cooling
results.
A
B
C
A. Sliding shelf
B. Slide rails
C. Rack
2. Using 2 hands, gently pull the rack and the slide rails at the
same time to the “V” cutout. Angle the rack so that the front is
higher than the back, and gently pull rack past “V” cutout and
then out of the oven.
To avoid damage to the sliding shelves, do not place more than
25 lbs (11.4 kg) on the rack.
Do not clean the roll-out rack in a dishwasher. It may remove the
rack’s lubricant and affect its ability to slide.
See the “General Cleaning” section for more information.
Meat Thermometer
On models without a temperature probe, use a meat
thermometer to determine whether meat, poultry and fish, are
cooked to the desired degree of doneness. The internal
temperature, not appearance, should be used to determine
doneness. A meat thermometer is not supplied with this
appliance. Follow manufacturer's directions for using a meat
thermometer.
Oven Vent(s)
Cooking Functions
1. From the Select Mode menu, select one of the following
options: Bake, Broil, Auto Convection Conversion,
MultiMode
Probe or My Creations for convection models; or Bake, Broil,
Keep Warm or My Creations for non-convection models.
2. If Convection is desired, select Auto Convection Conversion
or MultiMode
Conversion, you will be able to select between Bake, Broil,
Roast and Pastry, then enter temperature and time according
to your recipe or package. When necessary, the oven will
convert the time and/or temperature you entered. The
MultiMode
Convect Bake (Rapid Preheat), Convect Roast, Convect Broil,
Convect Slow Roast, Convect Pastry or Convect Frozen
Pizza.
3. Select the temperature. The default temperature and its range
is shown in the following table.
ModeDefault
Bake350°F (177°C)170-550°F (77-288°C)
Broil550°F (288°C)450-550°F (232-238°C)
K. Warm170°F (77°C)150-200°F (66-93°C)
Cvt. Bake325°F (163°C)170-550°F (77-288°C)
Cvt. Bake (Rapid
Preheat)
Cvt. Roast325°F (163°C)170-550°F (77-288°C)
®
Convection, Proof, Rapid Proof, Keep Warm,
®
Convection. By selecting Auto Convection
®
Convection allows you to select Convect Bake,
Range
Temperature
325°F (163°C)170-550°F (77-288°C)
A
B
C
D
E
F
G
Single and Double Oven
A. Control panel
B. Oven vent
C. Single oven or upper double oven
G. Bottom vent
Cvt. Broil550°F (288°C)450-550°F (232-238°C)
Cvt. S. Roast 4h275°F (135°C)250-300°F (120-150°C)
4. For cook timer, press the quickset pad next to Set Cook
Timer. Enter a cooking length using the number keypad to set
a timer to alert you when cooking ends. The time length may
not exceed 12 hours. See the “Cook Timer” section for
additional information. The oven will turn off when the cook
time expires.
5. (Optional) To keep food warm after a programmed cooking
cycle ends, select ON for Keep Warm when done. See the
“Keep Warm™ Option” section for additional information.
6. (Optional) To set a delayed start, press the quickset pad next
to Delay Start and set the desired time. See the “Delay Start”
section for additional information.
7. Press START to begin cooking.
8. Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER
on double oven models) to turn off the oven.
Auto Convection Conversion
Convection temperature and/or times can differ from those of
standard cooking. When necessary, the oven automatically
reduces standard recipe temperature and/or times.
1. From the Select Mode menu, touch the quickset pad next to
Auto Convection Conversion.
2. Select a recipe conversion mode: Bake (casseroles, baked
NOTE: The temperature probe cannot be used during any
auto convection conversion modes.
3. Enter standard cooking temperature. The temperature must
be 170°F (77°C) or above and may not exceed 550°F (288°C).
If a temperature outside of the available range is entered, the
Start and Set Timer options will be unavailable.
4. The standard cooking temperature will be converted to a
convection temperature if necessary.
5. Press START to begin, or select Set Timer to set a cook time.
6. For timer, enter the standard cooking time. The standard
cooking time cannot exceed 12 hours.
7. The standard cooking time will be converted to a convection
time if necessary.
NOTE: The converted cooking temperature and time may
vary between modes. Each mode adjusts the appropriate
temperature and time, when necessary.
8. Press START to begin preheating or cooking, or select Delay
Start and set desired time. See the “Delay Start” section for
additional information.
9. When the timer is set and time expires, you can select Exit
Timer to add more time. The oven will turn off when the cook
time expires.
My Creations
My Creations allows the customization of cooking processes.
When My Creations is selected from the main menu, a list of
previously created settings are presented along with the ability to
create more.
To create a new setting:
1. From the Select Mode menu, touch the MORE button until
My Creations is shown. Press the quickset pad next to it.
2. Press the quickset pad next to ADD NEW CREATION to
customize your cooking process.
3. Select cook mode.
4. Select cook temperature.
5. Select NEXT.
6. Select how to monitor cooking: Cook timer, probe or no
alerts. Probe is not available in non-convection models.
7. If Cook Timer is selected, enter cook timer length.
8. Select NEXT.
WARNING
Burn Hazard
Use an oven mitt to remove temperature probe.
Do not touch broil element.
Failure to follow these instructions can result in burns.
9. On Bake, Convect Bake or Convect Roast, the probe is
available. If the probe is desired, select Probe and enter the
target probe internal temperature.
10. Select NEXT.
11. Review your settings and select ADD STAGE or SAVE. If Add
Stage is selected, repeat steps 3-10 and select SAVE.
12. Select a name for the new creation.
To use a previously created setting:
1. From the Select Mode Menu, touch the MORE button until
My Creations is shown. Press the quickset pad next to it.
2. Press the quickset pad next to the desired setting.
3. Select START to begin preheating the oven or DELAY START
to set desired start time.
NOTE: You may also delete a setting from this screen. Select
DELETE then Yes.
13
The appropriate heating elements will cycle on and off in intervals
to maintain the oven temperature. Depending on your model, the
convection fan may cycle on and off.
Convection OvensNon-Convection Ovens
A
A
B
C
Bake
Rack positions for 27" (68.6 cm) Non-Convection ovens
1-rack baking: 2f
2-rack baking: 1f and 3f or 2f and 4f
For meat and poultry: 1f
For best results when baking cakes on 2 racks, use racks 1f and
3f for baking. Place the cakes on the racks as shown.
D
A. Broil element
B. Convection element
C. Convection fan
D. Bake element
If the oven door is opened during baking, the heating elements
will turn off approximately 30 seconds after the door is opened.
They will turn on again approximately 30 seconds after the door
is closed. If used, the convection fan turns off immediately when
the door is opened and turns on immediately when door is
closed.
B
A. Broil element
B. Bake element
Before Using Bake:
Before using Bake, see the “Positioning Racks and Bakeware”
section and the following tips for rack positions.
NOTE: An “o” after the rack position number indicates that the
offset rack should be used. An “f” indicates that the flat rack
should be used, and an “r” indicates that the roll-out rack should
be used.
Rack positions for 27" (68.6 cm) Convection ovens
1-rack baking: 2o, 2f or 3f
2-rack baking: 2o and 3r
For meat and poultry: 2o
For best results when baking cakes on 2 racks, use racks 2o and
3r for baking. Place the cakes on the racks as shown.
Rack positions for 30" (76.2 cm) Convection ovens
1-rack baking: 2f
2-rack baking: 2f and 4r or 2o and 4r
For meat and poultry: 2f
For best results when baking cakes on 2 racks, use racks 2f and
4r for baking. Place the cakes on the racks as shown.
Rack positions for 30" (76.2 cm) Non-Convection ovens
1-rack baking: 2f or 3f
2-rack baking: 2f and 5f or 3f and 5f
For meat and poultry: 2f
For best results when baking cakes on 2 racks, use racks 2f and
5f for baking. Place the cakes on the racks as shown.
14
To Use Bake:
1. From the Select Mode menu, touch the quickset pad next to
the Bake option.
2. From the Temperature screen, use the number keypad to
enter a desired cooking temperature. The temperature must
be between 170ºF (77ºC) and 550ºF (288ºC) or an invalid key
alert occurs and the default temperature appears on the
screen.
3. Press START to begin preheating oven or select Set Cook
Timer to set cook time and access Keep Warm (when used
with the Cook Timer) and Delay Start.
4. For cook timer, enter a cooking length using the number
keypad to set a timer to alert you when cooking ends. The
time length cannot exceed 12 hours. See “Cook Timer”
section for additional information. The oven will turn off when
the cook time expires.
5. (Optional) To keep food warm after a programmed cooking
cycle ends, select ON for Keep Warm when done. See the
“Keep Warm™ Option” section for additional information.
6. (Optional) To set a delayed start, press the quickset pad next
to Delay Start and set the desired time. See the “Delay Start”
section for additional information.
7. Press START to begin preheating the oven or to start the
countdown for Delay Start.
8. Place food in oven when the preheat signal sounds. The
screen will also prompt you when to insert food. If a delay
start is programmed, place food in oven when setting the
mode.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
NOTE: Do not use Delay Start for items that require a
preheated oven, such as cakes, cookies and breads. If food
is in the oven during preheat, it may become overcooked.
9. Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER,
on double models) to turn off the oven.
Broil
Broiling uses direct radiant heat to cook food. The door must be
closed for the broil element to operate.
A
A. Broil element
The element cycles on and off in intervals to maintain the oven
temperature. The oven door must be closed for the broil element
to operate.
If the oven door is opened during broiling, the broil element
will turn off in approximately 30 seconds. When the oven door
is closed, the elements will come back on approximately
30 seconds after the door is closed.
■ For best results, use a broiler pan and grid. It is designed to
drain juices and help avoid spatter and smoke.
If you would like to purchase a Broiler Pan Kit, it may be
ordered. See “Assistance or Service” section to order. Ask for
Part Number W10123240.
■ For proper draining, do not cover the grid with foil. The
bottom of the broiler pan may be lined with aluminum foil for
easier cleaning.
■ Trim excess fat to reduce spattering. Slit the remaining fat on
the edges to avoid curling.
■ Pull out oven rack to stop position before turning or removing
food. Use tongs to turn food to avoid the loss of juices. Very
thin cuts of fish, poultry or meat may not need to be turned.
■ After broiling, remove the pan and food from the oven.
Drippings will bake on the pan if left in the heated oven,
making cleaning more difficult.
To Use Broil:
Before using Broil, position rack according to the Broiling Chart.
When broiling, changing the temperature allows more precise
control. The lower the temperature, the slower the cooking.
Thicker cuts and unevenly shaped pieces of meat, fish and
poultry may cook better at lower broiling temperatures.
Position food on the grid on the broiler pan, then place it in the
center of the oven rack with the longest side parallel to the door.
Close the door.
1. From the Select Mode menu, press the quickset pad next to
the Broil option.
2. From the Temperature screen, use the number keypad to
enter a desired cooking temperature. The temperature must
be between 450ºF (232ºC) and 550ºF (288ºC) or an invalid
key alert occurs and the default temperature appears on the
screen.
3. Press START to begin cooking or select Set Cook Timer to
set cook time and access Keep Warm (when used with the
Cook Timer) and Delay Start.
4. For cook timer, enter a cooking length using the number
keypad to set a timer to alert you when cooking ends. The
time length cannot exceed 12 hours. See “Cook Timer”
section for additional information. The oven will turn off when
the cook time expires
5. (Optional) To keep food warm after a programmed cooking
cycle ends, select ON for Keep Warm when done. See “Keep
Warm™ Option” section for additional information.
6. (Optional) To set a delayed start, press the quickset pad next
to Delay Start and set the desired time. See the “Delay Start”
section for additional information.
7. Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER
on double models) to turn off the oven.
15
BROILING CHART
For best results, follow the chart below. For diagram, see the
“Positioning Racks and Bakeware” section.
A temperature setting of 550°F (288°C) is recommended.
Times are guidelines only and may need to be adjusted for
individual foods and tastes. Preheat is not needed for broiling.
FOOD27" Rack
Position
Beef
Steak
1" to 1¹⁄₄" (2.5 cm to
3cm) thick
medium-rare
medium
well-done
Pork
Pork chops
1" (2.5 cm) thick
medium3f4f16-24
Lamb
Lamb chops
1" (2.5 cm) thick
medium-rare
medium
3f
3f
3f
3f
3f
30" Rack
Position
4f
4f
4f
4f
4f
COOK TIME
(in minutes)
10-17
12-19
15-24
10-12
11-13
Convection
(on some models)
In a convection oven, the fan-circulated hot air distributes heat
more evenly than the natural movement of air in a standard
thermal oven. This movement of hot air helps maintain a
temperature throughout the oven, cooking foods more evenly,
while sealing in moisture.
Most foods, using Convect Baking modes, can be cooked by
lowering cooking temperatures 25°F (14°C). The cooking time
can be shortened by as much as 30 percent when using Convect
Roast, especially for large turkeys and roasts.
■ It is important not to cover foods with lids or aluminum foil so
that surface areas remain exposed to the circulating air,
allowing browning and crisping.
■ Keep heat loss to a minimum by opening the oven door only
when necessary.
■ Choose cookie sheets without sides and roasting pans with
lower sides to allow air to move freely around the food.
Chicken
bone-in pieces (2" to
2¹⁄₂" [5 cm to 6.3 cm])
boneless pieces (4 oz
[113 g])
Fish
Fish
¹₂" to ³⁄₄" (1.25 to 2 cm)
thick3f4f6-15
*Place up to 12 patties, equally spaced, on broiler grid.
An “o” after the rack position number indicates that the offset
rack should be used. An “f” indicates that the flat rack should be
used, and an “r” indicates that the roll-out rack should be used.
2f
3f
2f
4f
20-40
12-15
Burn Hazard
Use an oven mitt to remove temperature probe.
Do not touch broil element.
Failure to follow these instructions can result in burns.
■ Use a meat thermometer or the temperature probe to
determine the doneness of meats and poultry. Check the
temperature of pork and poultry in 2 or 3 places.
Convect Bake
(on some models)
The convection element is hidden in the rear panel of the oven
cavity, and, assisted by the convection fan, provides balanced,
efficient heating.
A
B
C
D
A. Broil element
B. Convection element
C. Convection fan
D. Bake element
16
Convection baking can be used for baking up to 2 racks of cakes
and up to 3 racks of food such as cookies. If the oven is full, extra
cooking time may be needed.
When cooking an oven meal with several different types of foods,
be sure to select recipes that require similar temperatures.
Cookware should sit in the oven with at least 1" (2.5 cm) of space
between the cookware and the sides of the oven.
During convection baking preheat, the convection (depending on
the model), bake and broil elements all heat the oven cavity while
the fan (depending on model) circulates the hot air. After preheat,
the convection element (depending on the model), bake element,
broil element and fan (depending on model) will cycle on and off
in intervals to maintain oven temperature.
If the oven door is opened during convection baking, the fan
turns off immediately and turns on immediately when the door is
closed. Convection, Bake and Broil elements will turn off
approximately 30 seconds after the door is opened. They will turn
on again approximately 30 seconds after the door is closed.
■ Reduce recipe temperature 25°F (14°C).
To Use Convect Bake:
Before using Convect Bake, see the “Positioning Racks and
Bakeware” section and the following tips for rack positions.
NOTE: An “o” after the rack position number indicates that the
offset rack should be used. An “f” indicates that the flat rack
should be used, and an “r” indicates that the roll-out rack should
be used.
Rack positions for 27" (68.6 cm) ovens
1-rack baking: 2o
2-rack baking: 2o and 3r
3-rack baking: 1o, 2r and 4f
For best results when baking cakes on 2 racks, use racks 2o and
3r for baking. Place the cakes on the racks as shown.
4. Press START to begin preheating oven or select Set Cook
Timer to set cook time and access Keep Warm (when used
with the Cook Timer) and Delay Start.
5. For cook timer, enter a cooking length using the number
keypad to set a timer to alert you when cooking ends. The
time length cannot exceed 12 hours. See the “Cook Timer”
section for additional information. The oven will turn off when
the cook time expires.
6. (Optional) To keep food warm after a programmed cooking
cycle ends, select ON for Keep Warm when done. See the
“Keep Warm™ Option” section for additional information.
7. (Optional) To set delayed start, press the quickset pad next to
Delay Start and set the desired time. See the “Delay Start”
section for additional information.
8. Press START to begin preheating the oven or to start the
countdown for Delay Start.
9. Place food in oven when the preheat signal sounds. The
screen will also prompt you when to insert food. If a delay
start is programmed, place food in oven when setting the
mode.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
NOTE: Do not use Delay Start for items that require a
preheated oven, such as cakes, cookies and breads. If food
is in the oven during preheat, it may become overcooked.
10. Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER,
on double models) to turn off the oven.
Rack positions for 30" (76.2 cm) ovens
1-rack baking: 3o
2-rack baking: 2o and 3r or 2o and 4r
3-rack baking: 1o, 3f and 5r
For best results when baking cakes on 2 racks, use racks 2o and
4r for baking. Place the cakes on the racks as shown.
1. From the Select Mode menu, press the quickset pad next to
the MultiMode
2. From the MultiMode
pad next to Convect Bake.
3. From the Temperature screen, use the number keypad to
enter a desired cooking temperature. The temperature must
be between 170°F (77°C) and 550°F (288°C) or an invalid key
alert occurs and the default temperature appears on the
screen.
®
Convection option.
®
Convection menu, press the quickset
Convect Bake (Rapid Preheat)
(on some models)
The convection element is hidden in the rear panel of the oven
cavity, and, assisted by the convection fan, provides balanced,
efficient heating.
A
B
C
D
A. Broil element
B. Convection element
C. Convection fan
D. Bake element
The Convect Bake (Rapid Preheat) mode will preheat the oven
faster than other modes. During Convect Bake (Rapid Preheat),
the broil, convect and bake elements cycle on and off to maintain
oven temperature.
The convection fan will run continuously during preheat and will
cycle on and off in intervals after preheat. This mode can be used
for one- and two-rack baking of items such as cakes, cookies
and biscuits.
17
If the oven door is opened during convection baking, the fan
turns off immediately and then turns on immediately when the
door is closed. The Convection, Bake and Broil elements will turn
off approximately 30 seconds after the door is opened. They will
turn on again approximately 30 seconds after the door is closed.
NOTE: Reduce recipe temperature by 25°F (14°C) for this cycle.
To Use Convect Bake (Rapid Preheat):
Before using Convect Bake (Rapid Preheat), see the “Positioning
Racks and Bakeware” section and the following tips for rack
positions.
NOTE: An “o” after the rack position number indicates that the
offset rack should be used. An “f” indicates that the flat rack
should be used, and an “r” indicates that the roll-out rack should
be used.
Rack positions for 27" (68.6 cm) ovens
1-rack baking: 2o
2-rack baking: 2o and 3r
For best results when baking cakes on 2 racks, use racks 2o and
3r for baking. Place the cakes on the racks as shown.
Rack positions for 30" (76.2 cm) ovens
1-rack baking: 2f
2-rack baking: 2f and 4r
For best results when baking cakes on 2 racks, use racks 2f and
4r for baking. Place the cakes on the racks as shown.
6. (Optional) To keep food warm after a programmed cooking
cycle ends, select ON for Keep Warm when done. See the
“Keep Warm™ Option” section for additional information.
7. (Optional) To set delayed start, press the quickset pad next to
Delay Start and set the desired time. See the “Delay Start”
section for additional information.
8. Press START to begin preheating the oven or to start the
countdown for Delay Start.
9. Place food in oven when the preheat signal sounds. The
screen will also prompt you when to insert food. If a delay
start is programmed, place food in oven when setting the
mode.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
NOTE: Do not use Delay Start for items that require a
preheated oven, such as cakes, cookies and breads. If food
is in the oven during preheat, it may become overcooked.
10. Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER,
on double models) to turn off the oven.
Convect Roast
(on some models)
Convection roasting can be used for roasting meats, poultry and
vegetables. During convection roasting, the broil, convect, and
bake elements will cycle on and off in intervals to maintain oven
temperature, while the fan circulates the hot air.
A
1. From the Select Mode Menu, touch the quickset pad next to
MultiMode
2. From the menu, press the quickset pad next to Convect Bake
(Rapid Preheat).
3. From the Temperature Screen, use the number keypad to
enter the desired cooking temperature. The temperature must
be between 170°F (77°C) and 550°F (288°C) or an invalid key
alert occurs and the default temperature appears on the
screen.
4. Press START to begin preheating oven or select Set Cook
Timer to set cook time and access Keep Warm (when used
with the Cook Timer) and Delay Start.
5. For cook timer, enter a cooking length using the number
keypad to set a timer to alert you when cooking ends. The
time length cannot exceed 12 hours. See “Cook Timer”
section for additional information. The oven will turn off when
the cook time expires.
®
Convection option.
B
C
D
A. Broil element
B. Convection element
C. Convection fan
D. Bake element
If the oven door is opened during convection roasting, the fan
turns off immediately and turns on immediately when the door is
closed. Bake, broil, and convect elements will turn off
approximately 30 seconds after the door is opened. They will turn
on again approximately 30 seconds after the door is closed.
■ The cook time will be reduced 15-30%.
■ For best results, use a broiler pan and grid designed to drain
juices and help avoid spatter and smoke.
■ It is not necessary to reduce recipe temperature.
■ If you would like to purchase a Broiler Pan Kit, it may be
ordered. See “Assistance or Service” section to order. Ask for
Part Number W10123240.
18
To Use Convect Roast:
Before using Convect Roast, see the “Positioning Racks and
Bakeware” section.
It is not necessary to wait for the oven to preheat before putting
food in, unless recommended in the recipe.
1. Place food in oven. Preheating the oven is not necessary.
2. From the Select Mode menu, touch the quickset pad next to
the MultiMode
®
Convection option.
3. From the menu, press the quickset pad next to Convect
Roast.
4. From the Temperature Screen, use the number keypad to
enter the desired temperature. The temperature must be
between 170°F (77°C) and 550°F (288°C) or an invalid key
alert occurs and the default temperature appears in the
screen.
5. Press START to begin cooking, or select Set Cook Timer to
set the cook time and access Keep Warm (when used with
the Cook Timer) and Delay Start.
6. For the cook timer, enter a cooking length using the number
keypad to set a timer to alert you when cooking ends. The
time length can not exceed 12 hours. See “Cook Timer”
section for additional information. The oven will turn off when
the cook time expires.
7. (Optional) To keep food warm after a programmed cooking
cycle ends, select ON for Keep Warm when done. See the
“Keep Warm™ Option” section for additional information.
8. (Optional) To set a delayed start, press the quickset pad next
to Delay Start and set the desired time. See the “Delay Start”
section for additional information.
9. Press START to begin cooking or to start the countdown for
Delay Start.
10. Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER,
on double models) to turn off the oven.
Convect Broil
(on some models)
A
B
To Use Convect Broil:
Before using Convect Broil, see “Broil” section for general
broiling guidelines. Position food on the broiler pan grid and
place it in the center of the oven rack with the longest side
parallel to the door. It is not necessary to wait for the oven to
preheat before putting in food unless recommended in the recipe.
Close the door.
1. From the Select Mode menu, press the quickset pad next to
the MultiMode
2. From the MultiMode
®
Convection option.
®
Convection menu, press the quickset
pad next to Convect Broil.
3. From the Temperature screen, use the number keypad to
enter a desired cooking temperature. The temperature must
be between 450°F (232°C) and 550°F (288°C) or an invalid
key alert occurs and the default temperature appears on
screen.
4. Press START to begin cooking or select Set Cook Timer to
set cook time and access Keep Warm (when used with the
Cook Timer) and Delay Start.
5. For cook timer, enter a cooking length using the number
keypad to set a timer to alert you when cooking ends. The
time length cannot exceed 12 hours. See “Cook Timer”
section for additional information. The oven will turn off when
the cook time expires.
6. (Optional) To keep food warm after a programmed cooking
cycle ends, select ON for Keep Warm when done. See the
“Keep Warm™ Option” section for additional information.
7. (Optional) To set a delayed start, press the quickset pad next
to Delay Start and set the desired time. See the “Delay Start”
section for additional information.
8. Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER
on double models) to turn off the oven.
Convect Slow Roast
(on some models)
Convect Slow Roast is best for food items such as beef, poultry
and pork. This cycle cooks food at low temperatures for long
periods of time. Food can be cooked up to 12 hours. Depending
on the time chosen, there is a range of temperatures to select.
See the following chart.
A
A. Broil element
B. Convection fan
During convection broiling, the broil element will cycle on and off
in intervals to maintain oven temperature, while the fan circulates
the hot air. The oven door must be closed for the broil element to
operate.
The temperature is preset at 550°F (288°C), but can be changed
to a different temperature. Cooking times will vary depending on
the rack position and temperature and may need to be adjusted.
The fan turns off immediately when door is opened and turns on
again immediately when door is closed. The broil element will
turn off approximately 30 seconds after the door is opened. They
will turn on again approximately 30 seconds after the door is
closed.
■ Prior to slow roasting, meat can be pan seared or broiled on
sides to enhance browning, flavor and tenderness.
19
To Use Convect Slow Roast:
Before using Convect Slow Roast, see the “Positioning Racks
and Bakeware” section.
NOTE: For 27" (68.6 cm) ovens, use rack 2o (offset rack). For 30"
(76.2 cm) ovens, use rack 2f (flat rack).
It is not necessary to wait for the oven to preheat before putting
food in, unless recommended in the recipe.
1. Place food in oven. Preheating the oven is not necessary.
2. From the Select Mode menu, touch quickset pad next to the
MultiMode
®
Convection option.
3. From the menu, press the MORE button until Convect Slow
Roast appears, Press the quickset pad next to it.
4. Choose a cooking length. Press the quickset pad next to
4 Hours, 8 Hours or 12 Hours.
5. To adjust the temperature, press the quickset pad next to
Temperature. Use the number keypad to enter desired
cooking temperature.
6. To return to the timer selections, touch quickset pad next to
Set Cook Timer.
7. Press START to begin cooking.
8. Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER,
on double models) to turn off the oven.
Convect Frozen Pizza
(on some models)
The Convect Frozen Pizza Mode is used to cook a variety of thick
and thin crust pizzas using one rack at a time.
A
B
C
D
4. Press Start to begin preheating oven or select Set Cook
Timer to set a cook time and access Keep Warm (when used
with the Cook Timer) and Delay Start.
5. For cook timer, enter a cooking length using the number
keypad to set a timer to alert you when cooking ends. The
time length cannot exceed 12 hours. See the “Cook Timer”
section for additional information. The oven will turn off when
the cook time expires.
6. (Optional) To keep food warm after a programmed cooking
cycle ends, select ON for Keep Warm when done. See the
“Keep Warm™ Option” section for additional information.
7. (Optional) To set a delayed start, press the quickset pad next
to Delay Start and set the desired time. See the “Delay Start”
section for additional information.
8. Press START to begin preheating the oven or to start the
countdown for Delay Start.
9. Place food in oven when the preheat signal sounds. The
screen will also prompt you when to insert food. If a delay
start is programmed, place food in oven when setting the
mode.
NOTE: Do not let food sit in the oven more than 1 hour before
or after cooking. Do not use Delay Start for items that require
a preheated oven, such as cakes, cookies and breads. If food
is in the oven during preheat, it may become overcooked.
10. Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER
on double models) to turn off the oven.
Convect Pastry
(on some models)
The Convect Pastry cycle is best for one-, two- or three-rack
baking of foods such as cream puffs, turnovers and croissants.
A
B
C
A. Broil element
B. Convection element
C. Convection fan
D. Bake element
■ Follow package directions for time and temperature.
To Use Convect Frozen Pizza:
Before using Convect Frozen Pizza, see the “Positioning Racks
and Bakeware” section.
NOTE: For 27" (68.6 cm) ovens, use rack 2o (offset rack). For 30"
(76.2 cm) ovens, use rack 2f (flat rack).
1. From the Select Mode menu, press the quickset pad next to
the MultiMode
2. From the MultiMode
button until Convect Frozen Pizza appears. Press the
quickset pad next to it.
3. From the Temperature screen, use the number keypad to
enter a desired cooking temperature. The temperature must
be between 170°F (77°C) and 550°F (288°C) or an invalid key
alert sounds and the default temperature appears on the
screen.
®
Convection option.
®
Convection menu, touch the MORE
D
A. Broil element
B. Convection element
C. Convection fan
D. Bake element
■ The recipe temperature should not be reduced when using
this mode.
To Use Convect Pastry:
Before using Convect Pastry, see the “Positioning Racks and
Bakeware” section and the following tips for rack positions.
NOTE: An “o” after the rack position number indicates that the
offset rack should be used. An “f” indicates that the flat rack
should be used, and an “r” indicates that the roll-out rack should
be used.
Rack positions for 27" (68.6cm) ovens
1-rack baking: 2o
2-rack baking: 2o and 3r
3-rack baking: 1f, 3o and 4r
20
Loading...
+ 44 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.