Page 1
JENN-AIR® DETAILED PLANNING DIMENSIONS
H
A
J
K
L
M
I I
30" SINGLE WALL OVENS
JJW3430D, JJW2430D – 30" x 297⁄8" x 255⁄16"
PRODUCT DIMENSIONS
1 of 4
FRONT VIEW
A
A
H
I I
JJW3430D
B C
MODEL #
JJW2430D
in cm
Overall width
Pro-Style® Stainless or Euro-Style Stainless
G
A
30 76.2
Floating Glass 2915⁄16 76.1
D
E
F
J
K
L
Height of control panel
B
Space between control panel and door
C
Height to top of handle
Pro-Style
D
®
Stainless 21
Euro-Style (color-coordinating)
Height of door
E
Height of trim
F
Overall height 297⁄8 75.8
G
Width of recessed oven 287⁄16 72.2
H
Width of conduit channel 35⁄16 8.8
I
Depth of recessed oven 231⁄8 58.7
J
Depth with door 245⁄16 61.8
K
Depth with handle
Pro-Style® Stainless 26
L
Euro-Style (color-coordinating)
Depth with door fully open 453⁄8 115.3
M
51⁄2 14.0
7
⁄16 1.1
11
217⁄16 54.4
221⁄8 56.2
111⁄16 4.3
5
⁄16 66.9
255⁄16 64.3
⁄16 55.0
M
TOP VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8660BdZw1015
Page 2
JENN-AIR® DETAILED PLANNING DIMENSIONS
H
A
J
K
L
I I
30" SINGLE WALL OVENS
JJW3430D, JJW2430D – 30" x 297⁄8" x 255⁄16"
DIMENSIONS AS INSTALLED
2 of 4
A
SIDE VIEW
G
H
I
MODEL #
J
Height to top of handle
Pro-Style
C
A
Euro-Style
®
Stainless 22
(color-coordinating)
E
F
Height of trim extending
B
below cutout 11⁄8 2.9
Height from top of recessed
oven to top of control panel
C
JJW3430D
D
JJW2430D 215⁄16 7.4
JJW3430D
JJW2430D
in cm
3
⁄4 57.8
229⁄16 57.3
21⁄2
6.3
Height from bottom of
B
recessed oven foot to bottom
D
3
⁄16 0.5
of oven vent
Height of recessed oven
E
Height to top of control panel 297⁄8 75.8
F
Depth with door fully open 453⁄8 115.3
G
Depth with handle
Pro-Style
H
Euro-Style
®
Stainless 26
(color-coordinating)
Depth with door 245⁄16 61.8
I
Depth of recessed oven 231⁄16 58.6
J
263⁄4 67.9
5
⁄16 66.9
255⁄16 64.3
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8660BdZw1015
Page 3
JENN-AIR® DETAILED PLANNING DIMENSIONS
A
D
E
B C
F
G
H
A
J
K
L
M
I I
B
G
I
J
E
F
H
C
D
A
G
A
B
C*
G
ee
E
D
F
30" SINGLE WALL OVENS
JJW3430D, JJW2430D – 30" x 297⁄8" x 255⁄16"
3 of 4
OPENING/CLEARANCE DIMENSIONS
MODEL #
JJW3430D
JJW2430D
in cm
Width of cabinet (min.) 30 76.2
A
Width of cutout 281⁄2 72.4
B
Height of cutout
C*
(recommended)
Top of cutout to bottom
D
of upper cabinet door (min.)
Bottom of cutout to top
E
D
C*
B
E
ee
F
G
FRONT VIEW SIDE VIEW
of lower cabinet door (min.)
Bottom of cutout to floor 32 81.3
F
Depth of cutout (min.) 24 61.0
G
Top of countertop to bottom
H
of cutout (min.)
Top of cutout to underside of
I
countertop (min.)
Bottom of cutout to floor 45⁄16 11.0
J
e
Recommended junction box location
*Will fit cutout height from 2615⁄16" (68.4 cm) to 297⁄16" (74.8 cm).
ELECTRICAL REQUIREMENTS
240 volt, 20-amp fused, grounded circuit is required. A dedicated
circuit is required.
The length of conduit provided is for serviceability. Do not cut
the conduit. The junction box should be located 3" (7.6 cm)
maximum below the support surface. Drill a 1" (2.5 cm)
minimum diameter hole in the right rear or left rear corner of
the support surface for access to the junction box.
NOTE: For under counter installation, the junction box should be
located in the adjacent right or left cabinet. Drill a 1" (2.5 cm)
minimum diameter hole in an upper corner of the side wall for
access to the junction box.
CABINET REQUIREMENTS
NOTE: When using under counter installation, check cabinet
manufacturer’s specifications to verify fit.
28 71.2
23⁄16 5.5
11⁄2 3.8
303⁄16 76.7
11⁄2 3.8
A
e
C*
H
I
e
Power Supply Location
B
g g
J
UNDER COUNTER INSTALLATION
(without cooktop installed above)
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
BACK VIEW
8660BdZw1015
Page 4
JENN-AIR® DETAILED PLANNING DIMENSIONS
F
A
E
B
F
ee
3
/4" (1.9 cm)
Top Cleat*
11
/16" (1.7 cm)
Side Cleat*
F
Side Cleat*
13/8" (3.5 cm)
Side Cleat*
1
/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
of cutout)
D
C
11
/16" (1.7 cm)
Side Cleat*
F
A
D
E
B C
F
G
H
A
J
K
L
M
I I
B
G
I
J
E
F
H
C
D
30" SINGLE WALL OVENS – FLUSH INSTALLATION
JJW3430D, JJW2430D – 30" x 297⁄8" x 245⁄16" (depth without handle)
4 of 4
OPENING/CLEARANCE DIMENSIONS
MODEL #
JJW3430D
JJW2430D
in cm
3
/4" (1.9 cm)
Top Cleat*
A
B
C
D
11
/16" (1.7 cm)
Side Cleat*
FRONT VIEW SIDE VIEW
11
/16" (1.7 cm)
Side Cleat*
1
/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
of cutout)
ee
E
Width of flush inset cutout
A
(min.)
Width of opening (min.) 287⁄8 73.3
B
Height of flush inset cutout
C
(min.)
Height of opening (min.) 2911⁄16 75.4
D
Bottom of cutout to floor
E
Depth of cutout (min.) 25 63.5
F
Bottom of cutout to floor for
G
under counter 41⁄16 10.3
e
Recommended junction box location
ELECTRICAL REQUIREMENTS
240 volt, 20-amp fused, grounded circuit is required. A
dedicated circuit is required.
The length of conduit provided is for serviceability. Do not cut
F
the conduit. The junction box should be located 3" (7.6 cm)
maximum below the support surface. Drill a 1" (2.5 cm)
minimum diameter hole in the right rear or left rear corner of
the support surface for access to the junction box.
NOTE: For under counter installation, the junction box should be
located in the adjacent right or left cabinet. Drill a 1" (2.5 cm)
minimum diameter hole in an upper corner of the side wall for
access to the junction box.
FLUSH INSTALLATION REQUIREMENTS
A 25" (63.5 cm) minimum cutout depth is required.
These dimensions will result in a 1⁄4" (0.6 cm) reveal on the top,
a 1⁄4" (0.6 cm) reveal on the sides and a 1⁄8" (0.3 cm) reveal on
the bottom of the wall oven.
The front face of the cleats and spacers will be visible and
should be treated as a finished surface.
CABINET REQUIREMENTS
NOTE: When using under counter installation, check cabinet
manufacturer’s specifications to verify fit.
301⁄4 76.8
307⁄16 77.3
45⁄8- 3211.7-
81.3
3
/4" (1.9 cm)
e
Top Cleat*
e
A
B
C
Power Supply Location
D
11
/16" (1.7 cm)
Side Cleat*
11
/16" (1.7 cm)
Side Cleat*
1
/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
of cutout)
F
Side Cleat*
G
13/8" (3.5 cm)
Side Cleat*
UNDER COUNTER INSTALLATION
(without cooktop installed above)
* Cleats and spacers must be recessed 13⁄8" (3.5 cm) from the front of the cabinet.
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
BACK VIEWTOP VIEW
8660BdZw1015
Loading...