Jenn-Air JDD4000AWS2, JDD4000AWS3, JDD4000AWX2, JDD4000AWX3 Installation Guide

°JENN-AIR

DRAWER DISHWASHER

INSTALLATION INSTRUCTIONS

INSTRUCTIONS D'INSTALLATION

LAVE-VAISSELLE A DOUBLE TIROIR

Table of Contents/Table des matieres ............................................................................. 2

iMPORTANT:

Save for local electrical inspector's use. JnstalJer: Leave installation instructions with the homeowner.

Homeowner: Keep installation instructions for future reference.

iMPORTANT :

_, conserver pour consultation par I'inspecteur local des installations 61ectriques. Installateur : Remettre les instructions d'installation au propri6taire.

Propri6taire : Conserver les instructions d'installation pour r6f@ence ult@ieure.

W10185132A

TABLEOF CONTENTS

DISHWASHER SAFETY ............................................................................... 2

INSTALLATION REQUIREMENTS ............................................................. 3

Tools and Parts ......................................................................................... 3

Location Requirements ............................................................................. 4

Water Supply Requirements ..................................................................... 5

Electrical Requirements ............................................................................ 5

Drain Requirements .................................................................................. 6

INSTALLATION INSTRUCTIONS ............................................................... 6

Unpack Dish Drawer ................................................................................. 6

Prepare Cabinet Opening ......................................................................... 6

Prepare Dishwasher .................................................................................. 7

Route Electrical Wiring .............................................................................. 8

TABLEDESMATIERES

Route Water Supply Line and Drain Hose ............................................... 9

Connect Water Supply Line and Drain Hoses ....................................... 10

Make Electrical Connection .................................................................... 11

Install Trim Pieces and Level Dishwasher .............................................. 12

Secure Dishwasher ................................................................................. 13

Complete Installation .............................................................................. 14

CUSTOM PANEL INSTALLATION INSTRUCTIONS .............................. 15

Custom Drawer Panel ............................................................................. 15

Preparing Custom Panel ........................................................................ 15

Install Panel Fasteners ............................................................................ 15

Mount the Custom Panel ........................................................................ 16

SI_CURITI_ DU LAVE-VAISSELLE ............................................................ 17

EXIGENCES D'INSTALLATION ................................................................ 18

Outillage et composants ......................................................................... 18

Exigences d'emplacement ..................................................................... 19

Sp6cifications de I'alimentation en eau .................................................. 19

Specifications electriques ....................................................................... 20

Evacuation de I'eau de lavage--Crit6res & respecter ............................ 20

INSTRUCTIONS D'INSTALLATION ......................................................... 21

Deballage du lave-vaisselle .................................................................... 21

Pr6paration de I'espace d'installation entre les placards ...................... 21

Pr6paration du lave-vaisselle .................................................................. 22

Installation du c&blage electrique ........................................................... 23

Installation du tuyau d'arrivee d'eau et du tuyau d'evacuation ............. 23

Raccordement du tuyau d'arriv6e d'eau et du tuyau d'evacuation ...... 24

Raccordement du circuit electrique ....................................................... 26

Installation des pieces de garniture; etablissement de I'aplomb

du lave-vaisselle ..................................................................................... 27

Arrimage de lave-vaisselle ...................................................................... 28

Achever I'installation ............................................................................... 29

INSTRUCTIONS D'INSTALLATION DU PANNEAU DI_CORATIF ......... 30

Panneau decoratif de tiroirs personnalises ............................................ 30

Pr6paration de panneau personnalise ................................................... 30

Installation des dispositifs de fixation de panneau ................................ 30

Montage du panneau decoratif .............................................................. 31

DISHWASHERSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: When using the dishwasher, follow basic precautions, including the following:

m Read all instructions before using the dishwasher. m Use the dishwasher only for its intended function.

m Use only detergents or rinse agents recommended for use

in a dishwasher, and keep them out of the reach of children.

m When loading items to be washed:

1) Locate sharp items so that they are not likely to damage the door seal; and

2) Load sharp knives with the handles up to reduce the risk of cut-type injuries.

m Do not wash plastic items unless they are marked

"dishwasher safe" or the equivalent. For plastic items not so

marked, check the manufacturer's recommendations.

m Do not touch the heating element during or immediately

after use.

m Do not operate the dishwasher unless all enclosure panels

are properly in place.

m Do not tamper with controls. m Do not abuse, sit on, or stand on the door, lid, or dish racks

of the dishwasher.

m To reduce the risk of injury, do not allow children to play in

or on the dishwasher.

m Under certain conditions, hydrogen gas may be produced in

a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water

system has not been used for such a period, before using the dishwasher turn on all hot water faucets and let the

water flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

m Remove the door or lid to the washing compartment

when removing an old dishwasher from service or

discarding it.

SAVE THESE iNSTRUCTiONS

Do not open dishwasher drawer until inside cabinet opening. Doing so can result in death or serious injury.

You need to:

• Slowly open dishwasher drawer while someone grasps the rear of the dishwasher. Remove shipping materials. Close

dishwasher drawer. Latch the dishwasher drawer shut.

• Observe all governing codes and ordinances.

INSTALLATIONREQUIREMENTS

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed

here.

Tools Needed

• Pliers

• Phillips screwdriver

• Flat-blade screwdriver

• ¾e" and 1¼,,nut drivers or hex sockets

• Measuring tape or ruler

• 11/2"hole saw bit

PaNs Needed

• 10" adjustable wrench

• Utility knife

• Level

• Cordless drill

• 1/8"drill bit

• Security T-20 TORX®t driver (if installing custom

front panel)

Tip Over Hazard

• Install this dishwasher as specified in these instructions.

• Have everything you need to properly install dishwasher.

• Contact a qualified installer to ensure that dishwasher is installed to meet all electrical and plumbing national and local

codes and ordinances.

1-®TORX is a registered trademark of Acument Intellectual Properties, LLC

A. 72" (182.9 cm) flexible water

supply fine B. Zip tie C. Appropriate sized UL-fisted wire

connectors (2)

D. Handle (if installing

custom front panel)

E. Custom panel (if

installing custom front panel)

Parts Supplied Check that all parts are included.

Product Dimensions

333/4''

(85.7 cm)

A. _" UL-listed strain relief B. 1.25" hose clamp C. Mounting bracket screws (8)

D. Unit mounting screws (4)

E. Ydrain connector F. Mounting brackets (4)

G. Drain connector spring

clamps (2)

H. Trim strips (2)

I. Toe kick brackets (2)

J. Toe kick bracket screws (2)

K. Toe kick trim

L. Panel fasteners (on some

models) (2)

M. TORX_tscrews (on some

models) (10)

OS eme

IMPORTANT: Observe all governing codes and ordinances. Failure to meet codes and ordinances could lead to fire or

electrical shock. Proper installation is your responsibility.

• Contact a qualified installer to ensure that the dishwasher is installed to meet all electrical and plumbing national and local

codes and ordinances.

• Install the dishwasher as specified in these instructions.

• Have everything you need to properly install dishwasher.

• Avoid damage from freezing to dishwasher and water lines leading to dishwasher. Damage from freezing is not covered by the warranty.

• This dishwasher is manufactured for indoor use only.

• Install and level dishwasher on a floor that will hold the weight, and in an area suitable for its size and use.

(48.9 cm) (3.75 cm)

11/2 ''

Installation Clearances

Cutout Dimensions

23W'

"(59.7 cm)"

Preferred Utililty Area

A. Left-hand or right-hand drain and water connection route B. Left-hand or right-hand electric connection route

NOTES:

• All holes should be drilled at 11/2"(3.8 cm) diameter.

• If the cabinet is wood, sand the hole until smooth. Ifthe cabinet is metal, cover the hole with a grommet (Part

Number 302797).

• For power supply cord connection, a mating, grounded 3 prong outlet is required in a cabinet next to the dishwasher opening.

GROUNDING iNSTRUCTiONS

For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a malfunction or breakdown, grounding will reduce the

risk of electric shock by providing a path of least resistance for electric current. The dishwasher is

equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be

plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the

equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or

service representative if you are in doubt whether the dishwasher is properly grounded. Do not modify the

plug provided with the dishwasher; if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

For a permanently connected dishwasher: The dishwasher must be connected to a grounded

metal, permanent wiring system, or an equipment- grounding conductor must be run with the circuit

conductors and connected to the equipment- grounding terminal or lead on the dishwasher.

SAVE THESE iNSTRUCTiONS

• A hot water line with 20-120 psi (138-862 kPa) water pressure.

• 120°F (49°C) water temperature at dishwasher.

• Flexible stainless steel braided fill line (1/2"minimum plastic tubing is not recommended).

E emen s

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong.

Do not use an adapter. Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

It is the customer's responsibility to:

• Contact a qualified electrician.

• Ensure that the electrical installation is adequate and in conformance with all national and local codes and ordinances.

Requirements:

• 120-volt, 60 Hz, AC-only, 15- or 20-amp fused electrical supply

• Copper wire only, 2 wire with ground

Recommended:

• Time-delay fuse or circuit breaker

• Separate circuit

Direct Wire Connection

• Use flexible, armored or nonmetalic sheathed, copper wire with grounding wire that meets the wiring requirements for

your home and local codes and ordinances.

• Use strain relief method provided with house wiring junction box or install a UL-listed/CSA-approved clamp connector to the house wiring junction box. If using conduit, use a

UL-listed/CSA-approved conduit connector.

Power Supply Cord Connection

Use Power Supply Cord Kit (Part Number 4317824) marked for use with dishwashers. Kit contents include:

• Voltex, Inc., UL-listed 16-gauge 3-wire power supply cord with 3 prong grounding plug

• Neer C-500 7/8"strain relief

• 3 wire connectors

• Grommet (Part Number 302797)

Follow the kit instructions for installing the power supply cord. NOTE: Power supply cord must plug into a mating, grounded

3 prong, outlet, located in the cabinet next to the dishwasher opening. Outlet must meet all local codes and ordinances.

IMPORTANT:Ifyouplantoinstallagarbagedisposal,an additionalseparate120-volt,60Hz,AC-only,15-or20-ampfused

• Useadrainairgapifthedrainhoseisconnectedtohouse plumbinglowerthan20"(50.8cm)abovethesubfloororfloor.

electricalsupplyisrequired.

Drain Air Gap

• Use the new drain hose supplied with your dishwasher. If this _I | is not long enough, use a new drain hose with maximum

length of 12 ft (3.7 m) that meets all current AHAM/IAPMO test standards, is resistant to heat and detergent, and fits the

1" (2.5 cm) drain connector of the dishwasher. Connect drain hose to waste tee or disposer inlet above drain

trap in house plumbing and 20" (50.8 cm) minimum above the floor. It is recommended that the drain hose either be looped

up and securely fastened to the underside of the counter, or be connected to an air gap.

Use W' (1.3 cm) minimum I.D. drain line fittings.

INSTALLATIONINSTRUCTIONS

2. Drill 1V2"(3.8 cm) diameter holes for drain and water hoses and electrical wiring as shown. Holes should be placed 1/2'(1.3 cm) from back wall.

Electrical Shock Hazard

Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

1. Disconnect power.

2. Turn off water supply.

Excessive Weight Hazard

Use two or more people to move and install dishwasher.

Failure to do so can result in back or other injury.

1. Read valuable information on exterior of shipping box before opening.

2. Remove shipping materials, tape and film from the dishwasher. Remove parts package from inside the

dishwasher.

Ccsb ne " C ng

To ensure minimum clearance dimensions exist:

• Measure the distance from the cabinet countertop to the

floor and ensure 333/4"(85.7 cm) minimum height.

• Measure the distance from the front of the cabinet to the

back wall and ensure 24" (61 cm) minimum depth.

• Measure the distance from the left-hand side to the right-

hand side of opening and ensure 23V2" (59.7 cm) minimum width.

A. Choose left-hand or fight-hand drain and water hose route. B. Choose left-hand or fight-hand electric wire route.

Install mounting brackets 17" (43.2 cm)from floor using screws provided. If needed, drill V8"pilot holes in cabinet.

17"

(43.2 cm)

4. Decide which dishwasher-to-counter attachment method will be used.

Option 1: Solid surface countertop installation

• Install second set of mounting brackets 331/2'' (85 cm) from floor. If needed, drill 1/8"pilot holes in cabinet.

Tip Over Hazard

Do not open dishwasher drawer until inside cabinet

opening. Doing so can result in death or serious injury.

Option 2: Wood countertop installation

• Prepare dishwasher by folding over tabs located on the top front as shown.

Excessive Weight Hazard

Use two or more people to move and install dishwasher.

Failure to do so can result in back or other injury.

1. Measure cabinet opening height from floor to bottom of countertop.

Place corner packaging on the floor and place dishwasher on its back.

3. Adjustlevelinglegsbasedonthecabinetopening measurementandthechartbelow.

Option 1: Right-hand side utility route

H 33 _" (86cm)

34" (86.3 cm) 34 _" (86.7cm) 34 _" (870m) 34%" (87.3 cm)

4. Place dishwasher in upright position.

:X :0"

: _" (0.3 cm) :¼" (0.6 cm) :%" (1 cm) :V2" (1.3 cm)

34½" (87.6cm) 34 _" (87.9 cm) 34 _" (88.3 cm) 34 _" (88.6 cm) 35" (88.9 cm)

:X :_" (1.6 cm)

:%" (1.9 cm) :_" (2.2 cm) :1" (2.5 cm) :1 _" (2.9 cm)

B_C_ ;@ .........._.. C :.,s _J__ _._s_;_

Electrical Shock Hazard

Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

Route wire through 1V2" (3.81 cm) hole located

8" (20.32 cm) above the floor.

After routing the electrical wire through the right-hand hole, attach

the wire to back left-hand side of cabinet wall 8" (20.32 cm) above the floor. Then continue routing the wire along the left-hand side of cabinet opening to the front of the opening.

Option 2: Left-hand side utility route

Follow all national and local codes and ordinances for completing electrical supply to cabinet.

Route wire through 1V2"(3.81 cm) hole located 8"

(20.32 cm) above the floor.

After routing the electrical wire through the left-hand hole,

continue routing the wire along the left-hand side of cabinet to the front of the opening.

1. Oonnect water supply line to water valve on dishwasher.

2. Route water supply line and drain hoses based on your cabinet requirements.

Option 1: Right-hand side utility access

• For right-hand routing, water supply and drain hoses are

shipped in the correct position. Place the water supply line in the clip as shown.

Option 2: Left-hand side utility access

• For left-hand routing, remove drain hoses from the clips in the rear bracket as shown.

• Route water supply line and drain hoses into the cabinet.

• Slide dishwasher partway into the cabinet opening. Allow for access to the electrical terminal box.

Connect water supply line to the water valve under the sink.

A. Hot water supply

Slide clamps onto drain hoses (Figure A). Do not cut drain hoses.

Push hoses into Y drain connector until fully seated (Figure B). Several "clicks" will be heard.

Slide clamps into position (figures C and D).

A B

Option 1:Waste disposer no drain air gap

A. For new construction, remove disposer plug.

B. Connect drain connector to waste disposer.

C. Tighten clamp.

Option 2: No waste disposer and drain air gap

C D

5. Connect the drain hose using one of the following options:

A. Drain hose connector B. Drain air gap

C. Waste

S ..........

A. Drain hose connector B. Drain air gap

C. Waste

+ 22 hidden pages