JENN-AIR® DETAILED PLANNING DIMENSIONS
F
G
H
I
J
A
B
D
C
E
F
G
H
I
J
I
H
G
F
JENN-AIR® DETAILED PLANNING DIMENSIONS
FLUSH DISHWASHER
JDB9600CW – 239⁄16" x 341⁄16" x 249⁄16"
PRODUCT DIMENSIONS
1 of 3
FRONT VIEW
A
C
D
E
B
ADJUSTABLE TOE KICK
MODEL # JDB9600CW
in cm
3
Width of door 23
A
Width of toe kick 23
B
Height to top of handle
®
C*
Pro-Style
Stainless
Euro-Style Stainless 31
Height of door
®
Pro-Style
D
Stainless
Euro-Style Stainless 30
Height of adjustable toe kick (min.-max.)
E
Width of recessed dishwasher 23
F
Depth with tub flange
G
Depth with door
®
Pro-Style
H
Stainless
Euro-Style Stainless 22
⁄16 58.9
1
⁄2 59.7
3
31
⁄4 80.6
1
⁄2 80.1
3
30
⁄16 76.6
3
⁄16 76.6
1
⁄4-
4
1
6
⁄8
9
⁄16 59.8
1
⁄4 51.5
20
7
22
⁄16
7
⁄16 57.0
Depth with handle
®
Pro-Style
I*
Euro-Style Stainless 24
Depth with door fully open
J
Stainless 251⁄16 63.6
9
⁄16 62.4
7
⁄16 120.5
47
10.8-
15.5
57.0
TOP VIEW
F
G
H
I
J
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8038AdZw614
JENN-AIR® DETAILED PLANNING DIMENSIONS
JENN-AIR® DETAILED PLANNING DIMENSIONS
FLUSH DISHWASHER
JDB9600CW – 239⁄16" x 341⁄16" x 249⁄16"
DIMENSIONS AS INSTALLED
2 of 3
SIDE VIEW
F
G
H
I
MODEL # JDB9600CW
in cm
Height to top of tub flange
A*
(min.)
Height to top of door (min.) 3315⁄16 86.2
B*
1
⁄16 86.5
34
Height to top of handle (min.)
®
C*
Pro-Style
Euro-Style Stainless 31
A*
B*
E*
C*
Height to bottom of door 3
D*
Height of recessed
E*
dishwasher (min.)
Depth with door fully open
F
(min.)
Depth with handle (min.)
D*
J
Floor
* Add up to 23⁄8" (6 cm) in height with leg levelers fully extended.
Pro-Style
G
Euro-Style Stainless 24
Depth with door (min.) 22
H
Depth with tub flange (min.) 20
I
Depth with toe kick (min.) 17
J
Stainless 313⁄4 80.6
1
⁄2 80.1
5
⁄8 9.4
1
⁄16 86.5
34
7
47
⁄16 120.5
®
Stainless
251⁄16
9
⁄16 62.4
7
⁄16 57.0
1
⁄4 51.5
15
⁄16 45.5
63.6
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8038AdZw614
JENN-AIR® DETAILED PLANNING DIMENSIONS
Floor
E
F
JENN-AIR® DETAILED PLANNING DIMENSIONS
FLUSH DISHWASHER
JDB9600CW – 239⁄16" x 341⁄16" x 249⁄16"
OPENING/CLEARANCE DIMENSIONS
3 of 3
FRONT VIEW
SIDE VIEW
A
MODEL # JDB9600CW
in cm
Width (min.) 24 61.0
A
Width of clear area (back wall) 24 61.0
C*
B
D
B
Height 34
C*
Height of possible utility installation area
D
(back wall)
Depth (min.) 24 61.0
E
Depth of utility location (side wall) 2
F
1
⁄16 86.5
1
⁄2 8.9
3
1
⁄16 5.3
Water and drain connections may be installed in lighter
shaded areas
Recommended drain connection location –
closest to sink
Recommended water connection location –
E
left-hand side or back wall
11⁄2 dia. 3.8 dia.
1
⁄2 dia. 1.3 dia.
Electrical connections may be installed in darker shaded areas
Floor
Recommended electrical connection location –
adjacent cabinet
* Measured from the lowest point on the underside of countertop.
F
ELECTRICAL REQUIREMENTS
120 volt, 60 Hz, AC only, 15- or 20-amp fused, grounded circuit is required.
A dedicated circuit is recommended. Use an outlet that cannot be turned off
by a switch. Do not use an extension cord.
1
⁄2 dia. 3.8 dia.
1
WATER SUPPLY REQUIREMENTS
120°F (49°C) hot water supply with water pressure between 15 and 145 psi (103 and
1,000 kPa) is required. If you have questions about your water pressure, call a
licensed, qualified plumber.
DRAIN REQUIREMENTS
Connect drain hose to waste tee or disposer inlet above drain trap.
Maximum drain hose length 121⁄2' (3.8 m).
LOCATION REQUIREMENTS
Corner locations require a 2" (5.1 cm) minimum clearance between
the side of the dishwasher door and the wall or cabinet.
BACK VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8038AdZw614
Loading...