Jenn-Air JDB8700AWS4, JDB8200AWS4 Owner’s Manual

LEARN MORE
In an effort to conserve natural resources, this dishwasher includes a condensed User Guide. A complete User Guide can be downloaded at www.jennair.com/manuals. The model number is located on a label in the tub along the left outer edge.
Register your dishwasher at www.jennair.com.
In Canada, register your dishwasher at www.jennair.ca.
Para una version de estas instrucciones en espa#ol, visite www.jennair.com.
Your safety and the safety of others are very important.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
This is the safety alert symbol. These words mean:
You can be killed or seriously injured if you don't immediately follow instructions.
You can be killed or seriously injured if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using the dishwasher, follow basic precautions, including the following:
[] Read all instructions before using the dishwasher. [] Do not tamper with controls. [] Use the dishwasher only for its intended function. [] Use only detergents or rinse agents recommended for use in a
dishwasher, and keep them out of the reach of children.
[] When loading items to be washed:
1) Locate sharp items so that they are not likely to damage the door seal; and
2) Load sharp knives with the handles up to reduce the risk of cut-type injuries.
[] Do not wash plastic items unless they are marked
"dishwasher safe" or the equivalent. For plastic items not so
marked, check the manufacturer's recommendations.
[] Do not touch the heating element during or immediately after
use.
[] Do not operate the dishwasher unless all enclosure panels are
properly in place.
[] Do not abuse, sit on, or stand on the door, lid, or dish racks of
the dishwasher.
[] To reduce the risk of injury, do not allow children to play in or
on the dishwasher.
[] Under certain conditions, hydrogen gas may be produced in a
hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the
dishwasher turn on all hot water faucets and let the water flow from each for several minutes. This will release any
accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
[] Remove the door or lid to the washing compartment
when removing an old dishwasher from service or discarding it.
SAVE THESE INSTRUCTIONS
State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer. WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.
W10596235A
Tip Over Hazard
Do not use dishwasher until completely installed. Do not push down on open door. Doing so can result in serious injury or cuts.
GROUNDING iNSTRUCTiONS
For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The dishwasher is equipped with a cord having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet
that is installed and grounded in accordance with all local codes and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
SAVE THESE iNSTRUCTiONS
Your dishwasher has the latest technology in dishwasher filtration.
This filtration system minimizes sound and optimizes water and energy conservation while providing superior cleaning.
The filter system consists of two parts, an upper filter assembly and lower
filter. IMPORTANT: To avoid damage to dishwasher, do not operate your
dishwasher without filters properly installed. Be sure lower filter is securely inplace and upper filter assembly is locked into place. If upper assembly turns freely, it is not locked into place.
Lower Filter
Check with a qualified electrician or service representative if you are in doubt whether the dishwasher is properly grounded. Do not modify the plug provided with the dishwasher; if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
For a permanently connected dishwasher: The dishwasher must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on the dishwasher.
Energy efficiency is gained by extending cycle time and reducing the amount of wattage and water used during your dishwasher's cycle. For exceptional cleaning, cycles are longer due to the soak and pauses. Several models contain an optical water sensor used to determine water and energy consumption for great cleaning performance.
Efficient dishwashers run longer to save water and energy, just as driving a car slower saves on gas. Your first cycle will run longer to calibrate the optical water sensor.
Press startftesum÷ every time you add a dish,
FiJter maintenance
The filters may need to be cleaned when:
Visible objects or soils are on upper filter assembly.
Dishes feel gritty to the touch.
See "Filtration System" in full User Guide for complete removal and maintenance
schedule. IMPORTANT: Do not use wire brush,
scouring pad, etc., as they may damage the filters.
Rinse filter under running water until soils are removed. If you have hard to remove soils or calcium deposits from hard water, a soft brush may be required.
#tying o Rinse Aid is essential°
You must use a drying agent such as a rinse aid for good drying performance. Rinse aid along with the Precision Dry_option will provide best drying and avoid excessive
moisture in dishwasher interior.
IMPORTANT: If anyone opens the door (such as, for adding a dish, even during the Delay Hours option), I
START/RESUME must be pressed each time. Push door firmly closed within 3 seconds of pressing
START/RESUME. If door is not closed within 3 seconds, the start button LED will flash, an audible tone will be heard, and cycle will not start.
Repeat Lest Cycle
Recommended detergent
The United States and Canada
have passed a restriction limiting
the amount of phosphorus
(phosphates) in the household dishwasher detergents to no more than 0.5%, where previous detergents contained 8.7%. Major
manufacturers have reformulated
their dishwasher detergent for this change in detergents as
another step in eco-conscious awareness. With these recent
changes it is recommended to use tablets and packs for convenience
and improved performance.
10 )lace load - upper rack 10place load - lower rack
12 place load - upper rack 12place load - lower rack
IMPORTANT: Remove leftover food, bones, toothpicks and other hard items from dishes. Remove labels from containers before washing.
Make sure when dishwasher door is closed no items are blocking detergent dispenser.
Items should be loaded with soiled surfaces facing down and inward to the spray as shown in the graphics above. This will improve cleaning and drying results. Angle dirtiest dish surface downward, allowing space for water to flow up through rack and
between dishes. Avoid overlapping items like bowls or plates that may trap food.
Place plastics, small plates and glasses in upper rack. Wash only items marked "dishwasher safe." To avoid thumping/clattering noises during operation: Load dishes
so they do not touch one another. Make sure lightweight load items are secured in racks.
When loading silverware, always place sharp items pointing down and avoid "nesting" as shown. If your silverware does not fit into the designated slots, flip covers up and mix silverware types to keep them separated.
Use slots in the covers and suggested loading
patterns to keep your silverware separated for
optimum wash. (See illustration, right.)
3.Add #etergent
NOTE: If you do not plan to run a wash cycle soon, run a rinse cycle. Do not use detergent.
Use automatic dishwasher detergent only. Add detergent just before starting a cycle.
Fresh automatic dishwasher j_ detergent results in better
cleaning. Store tightly closed detergent container in a cool, dry place.
Prerneasured Detergents
Many detergents now come in premeasured forms (gel packs, tablets, or powder packs). These forms are suitable for all hardness and soil levels. Always place premeasured detergents in main compartment
and close lid. Using dishwasher detergent tablets and packs have been proven better
than powder, liquid or gel detergents at reducing filming on dishes. Using tablets and packs over time will start to reduce or eliminate white
film. Also, by using a rinse aid you can minimize repeat buildup of white film.
Powder and Gels
The amount of detergent to use depends on: How much soil remains on the items - Heavily soiled loads require
more detergent. The hardness of the water - If you use too little detergent in hard
water, dishes won't be clean. If you use too much in soft water, glassware will etch.
Soft to Medium Water (0-6 grains per U.S. gallon) [typical water softener water and some city water]
Medium to Hard Water (7-12 grains per U.S. gallon) [well water
and some city water]
Depending on your water hardness, fill the Main Wash section of the dispenser. Fill the Pre-Wash section, if needed.
NOTE: Follow instructions on the package when using other dishwasher detergent types.
4°Add Rinse Aid
Your dishwasher is designed to use rinse aid for good drying performance. Without rinse aid, your dishes and dishwasher interior will have excessive moisture. The heat dry option will not perform
as well without rinse aid. Rinse aid keeps water from forming droplets that can dry
as spots or streaks. It also improves drying by allowing water to drain off of dishes after final rinse.
To add rinse aid, turn the dispenser cap to "Refill" and lift
off. Pour rinse aid into the opening until indicator level is at "Full."
Replace dispenser cap and turn to "Lock." Make sure cap is fully
locked.
NOTE: For most water conditions, the factory setting will give good results.
Check water hardness level to ensure no rings or spots on your dishware before adding rinse aid or adjusting the factory setting.
If you are experiencing poor drying performance, you may want to try a higher setting.
Turn the arrow adjuster inside the dispenser to change rinse aid setting.
EINSE AID Ih _____________,,,,__
Full Add
5,$÷1÷et a Cycle eyeles vary
by eeel}
Efficient dishwashers run longer to save water and energy, just as driving a car slower saves on gas. Typical cycle time is approximately 21/2hours, but can take less or more time to complete depending on
selections.
oSeleet Options {options vary
by eeel}
You can customize your cycles by pressing the options desired. If you change your mind, press the option again to turn off the option. Not all options are available for every cycle. If an invalid option is selected for a given cycle, the lights will flash.
7,Start er Resume a @yeJ÷
NOTE: Run hot water at the sink nearest your dishwasher until the water is hot. Turn off water.
Push door firmly closed within 3 seconds of pressing START/ RESUME. If door is not closed within 3 seconds, the Start indicator
will flash, an audible tone will be heard, and cycle will not start.
IMPORTANT: If anyone opens the door (such as, for adding a dish, even during the Delay Hours option), the START/RESUME button must be pressed each time.
Press START/RESUME to repeat the same cycle and options as in the previous wash cycle.
This information covers several different models. Your dishwasher may not have all of the cycles and options described.
The most advanced and versatile cycle. Sensor Wash cycle Light to Medium 110 150 3.8 (14.5)
Sensor senses the load size, soil amount, and toughness of soil, to Tough/Baked-On 125 190 5.0 (19.1 )
| Wash adjust the cycle for optimal cleaning using only the amount of
water and energy needed. Heavy 125 190 7.7 (29.0)
Use for hard-to,clean, heavily soi!ed pots, pans, casseroles; and Heavy/Baked,On 140 205 7.9 (30.0)
This cycle is recommended to completely wash a full load of Light 110 150 2.8 (10.5)
I Normal normally soiled dishes. Selecting this cycle will default to the Medium 110 150 4.0 (15.0)
Wash options recommended for normal amounts of food soil. The
energy label is based on this cycle. Heavy 125 190 7.7 (29.0)
Use for lightly soiled items or china and crystal. Light to Medium 105 145 4.2(15.2)
When you need fast results, the 1 Hour Wash will clean dishes All soil levels 58 63 6.2 (23.5)
I 1Hour using slightly more water and energy. Select the Precision Dry_
Wash or Precision Dry®+ option to speed drying times (adds
approximately 27 to 35 minutes to the 1 Hour Wash cycle).
Use for rinsing dishes, glasses, and si!verware that wi!l not be All soil levels 17 20 2,4 (9,0)
| washed right away. ..............................................................................................
On y Do n0t Use detergent!
Raisesthemainwashtemperatureto HeavyWash
|
Sound On/Off - 3 Sec
_1 Steam I steam before fina! rinse to he!p enhance SensorWash temperature from lO5°F 10-1491
Finish shine fimsh and reduce glass spots: Normal Wash (4! C) to !40 F(60 C),
Sanitize accordance with National Sanitation
|- Foundation (NSF)/ANSI Standard 184 for
l I For added convenience, use for washing a Available Slightly faster wash for -7 -30 0
Top Rack small load of dishes in the top rack to help with any smaller loads
Precision
| Dry +
Precision use of rinse aid wi!! provide the best drying with any e!ement at the end of the
I Dry I performance, P!astic items are less like!y to cycle except wash cycle to speed
4 Hour off-peak electrical hours. Select a wash cycle with any
I De ay and options. Press 4 Hour Delay. Press cycle
Control Avoids unintended use of the dishwasher between cYCles, or cycle and option changes during a cycle:
Lock
| _ will stay on for a short time, indicating that it is activated, and a!l buttons are disabled. If you press any button while your d shwasher _: socked, the ghtfashes3tmes The d shwasher door can st beopenedicosedwh ethecontrosare ocked
_.ontrol lock - 3 bec _
Contro .......
| . . NOTE: f your model requires you to press and hold 4 Hour Delay to lock the controls the Control Locked LED will be on or off to
LOCK indicate if the Control Lock is active or noL
Hold] Sec
improvecleaningforloadscontainingtough, NormalWash
baked-on food. Sensor Wash
Raises the temperature with the power of Heavy Wash Raises main wash 78 100 0,3.9
o o o /
Sanitizes dishes and glassware in
Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments. The San!
indicator indicates at the end of the cycle whether the Sanitize option was successfully completed. If the indicator does not activate, it is probably due to the cycle being interrupted.
keep the kitchen c0ntinuously Cleanl cycle Dries dishes with heat and afan. This option Available Uses the heating 44 51 0
with the use of rinse aid will provide the best with any element, vents and a fan drying performance. Plastic items are less cycle except to speed drying times. likely to deform when loaded in the top rack. Rinse Only Precision Dry% option Turn Precision Dry®+ option off for an air dry. defaults to On when any
Dries dishes with heat, This option with the Available Activates the heating 52 52 0
deform when loaded in the top rack. Turn Rinse Only drying times. Precision Precision Dry®off for an air dry. Dr_ defau!ts t0 ON
Runs the dishwasher at a later time or during Available
START/RESUME. Close the door firmly. NOTE: Anytime the door is opened (such as,
to add a dish), the START/RESUME button must be pressed again to resume the delay
countdown.
Toturn on Lock' press and hold CONTROL LOCK oi4 HOUR DELAY(depending on m0de!)f0r 3 second& The Conti0i E0ck light
To turnoff Lock, press and hold CONTROL LOCK or 4 HOUR DELAY(depending on model) for3 seconds: The light turns off.
Heavy Wash Increased the main 53 73 0- 3.0
Normal Wash wash temperature from (0 - 11.2) Sensor Wash 105°F (41°C) to 140°F
Raises the main wash temperature from 105°F
(41°C) to 140°F (60°C).
steam c ean before rinsing, finn! rinse
temperature140°F
(60°C) to 155°F (68°C) ..........................
(60°C) and the final rinse from 140°F (60°C) to 155°F (68°C).
cycle is selected except for 1 Hour Wash.
when any cyc!e is selected except for
1Hour Wash. Delays the start of a 240 240
cycle up to 4 hours.
22 40 0 - 3.0
(0- 11.2)
Q
Loading...
+ 11 hidden pages