Jenn-Air JDB3000AWW2, JDB3000AWW1, JDB3000AWW0, JDB3000AWS2, JDB3000AWS1 Owner’s Manual
...
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered inTROUBLESHOOTING,
please visit our website at www.jennair.com for additional information. If you still need assistance, call us at 1-800-688-1100. In
Canada, visit our website at www.jennair.ca or call us at 1-800-807-6777.
You will need your model and serial number located near the door on the right-hand or left-hand side of the dishwasher interior.
Para obtener acceso a "lnstrucciones para elusuario de la lavavajillas" en espa_ol, o para obtener informaci6n adicional de su
producto, visite: www.jennair.com
Tenga listo su nOmero de modelo completo. Puede encontrar su nOmerode modelo y de serieen laetiqueta ubicada cerca de la
puerta al lado derecho o izquierdo del interior de la lavavajillas.
TableofContents
DISHWASHER SAFETY ............................................................. 1
QUICK STEPS ............................................................................ 3
DISHWASHER USE .................................................................... 3
CYCLE AND OPTION DESCRIPTIONS .................................... 5
DISHWASHER FEATURES ........................................................ 7
DISHWASHER CARE ................................................................. 7
TROUBLESHOOTING ................................................................ 8
WARRANTY .............................................................................. 10
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
W10208698A
iMPORTANT SAFETY iNSTRUCTiONS
WARNING: When using the dishwasher, follow basic precautions, including the following:
[] Read all instructions before using the dishwasher. [] Do not tamper with controls.
[] Use the dishwasher only for its intended function.
[] Use only detergents or rinse agents recommended for use in
a dishwasher, and keep them out of the reach of children.
[] When loading items to be washed:
1) Locate sharp items so that they are not likely to damage
the door seal; and
2) Load sharp knives with the handles up to reduce the risk
of cut-type injuries.
[] Do not wash plastic items unless they are marked
"dishwasher safe" or the equivalent. For plastic items not so
marked, check the manufacturer's recommendations.
[] Do not touch the heating element during or immediately after
use.
[] Do not operate the dishwasher unless all enclosure panels
are properly in place.
[] Do not abuse, sit on, or stand on the door, lid, or dish racks
of the dishwasher.
[] To reduce the risk of injury, do not allow children to play in
or on the dishwasher.
[] Under certain conditions, hydrogen gas may be produced in
a hot water system that has not been used for two weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using
the dishwasher turn on all hot water faucets and let the
water flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.
[] Remove the door or lid to the washing compartment
when removing an old dishwasher from service or
discarding it.
SAVE THESE iNSTRUCTiONS
GROUNDING iNSTRUCTiONS
For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for
electric current. The dishwasher is equipped with a cord
having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet
that is installed and grounded in accordance with all local
codes and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service representative
if you are in doubt whether the dishwasher is properly
grounded. Do not modify the plug provided with the
dishwasher; if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
[]
For a permanently connected dishwasher:
The dishwasher must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on
the dishwasher.
SAVE THESE iNSTRUCTiONS
Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
Prepare and load _
dishwasher. %Y
Select a cycle and option.
CYCLES
[] [] []
Heavy
Wash I [ N°rmalWash ] [ China!
OPTIONS
[] [] []
Super
Scrub 1[ San't'ze] 1 H ;yd
Crystal
2
for cleaning and
rinse aid for
Add detergent _ _
drying. ,.;i}.!!}_.._,."
Prepare and Load the Dishwasher
IMPORTANT: Remove leftover food, bones, toothpicks and other
hard items from the dishes. Remove labels from containers before
washing.
10 Place load pattern
Upper rack
Lower rack
Start
[]
dishwasher.
Start/
Resume I
Make sure nothing keeps spray arm(s) from
spinning freely. It is important for the water
spray to reach all soiled surfaces.
• Make sure that when the dishwasher door is closed no items
are blocking the detergent dispenser.
• Items should be loaded with soiled surfaces facing down and
inward to the spray as shown. This will improve cleaning and
drying results.
• Avoid overlapping items like bowls or plates that may trap food.
• Place plastics, small plates and glasses in the upper rack.
Wash only plastic items marked "dishwasher safe."
• To avoid thumping/clattering noises during operation: Load
dishes so they do not touch one another. Make sure lightweight
load items are secured in the racks.
12 Place load pattern
Upper rack Lower rack
When loading silverware, always place sharp
items pointing down. Mix other items
pointing up and some pointing down.
STEP 2
Add Detergent
NOTE: If you do not plan to run a wash cycle soon, run a rinse
cycle. Do not use detergent.
• Use automatic dishwasher detergent only. Add powder, liquid
or tablet detergent just before starting a cycle.
• Fresh automatic A
dishwasher detergent
results in better
cleaning. Store tightly
closed detergent
container in a cool, dry
place.
A. Cover la tch
B.Main Washsection
C. Pre-Washsection
• The amount of
detergent to use depends on:
How much soil remains on the items - Heavily soiled loads
require more detergent.
The hardness of the water - If you use too little in hard water,
dishes won't be clean. If you use too much in soft water,
glassware will etch.
Soft to Medium Water (0-6 grains per U.S. gallon)
[typical water softener water and some city water]
Medium to Hard Water (7-12 grains per U.S. gallon)
[well water and some city water]
• Depending on your water hardness, fill the Main Wash section
of the dispenser as shown. Fill the Pre-Wash section to the
level shown, if needed.
NOTE: Fill amounts shown
are for standard powdered
detergent. Follow instructions
on the package when using
other dishwasher detergent.
HardWater
Soft Water
MainWash Pre-Wash
HardWater
SoftWater
Add Rinse Aid
Your dishwasher is designed to use rinse aid for good drying
performance. Without rinse aid your dishes and dishwasher
interior will have excessive moisture. The heat dry option will
not perform as well without rinse aid.
Rinse aid keeps water from forming droplets that can
dry as spots or streaks. They also improve drying by
allowing water to drain off of the dishes after the final
rinse.
Rinse aid helps to reduce excess moisture on the
dish racks and interior of your dishwasher.
Full
Add
• Check the rinse aid indicator. Add rinse aid when indicator
drops to "Refill" level.
To add rinse aid, turn the dispenser
Lock
cap to "Open" and lift off. Pour rinse
aid into the opening until the indicator
level is at "Full." Replace the
dispenser cap and turn to "Lock."
Make sure cap is fully locked.
Refill/_
¼turn to lock
NOTE: For most water conditions, the
factory setting of 2 will give good
results. If you have hard water or notice
rings or spots, try a higher setting. Turn
the arrow adjuster inside the dispenser
by either using your fingers or inserting
a flat-blade screwdriver into the center
of the arrow and turning.
Select a Cycle (cycles vary by model)
See "Cycle and Option Descriptions" charts in the following
section.
Heavier cycles and options affect cycle length. Some cycles and
options will take up to 31/2hours to complete.
CYCLES
[] [] []
I HeavyWas_ I I N°rmalWash I[ China1
Crystal
Select Options (options vary by model)
See "Cycle and Option Descriptions" charts in the following
section.
You can customize your cycles by pressing the options desired.
OPTIONS
[] [] []
I Super Sanitize ] [Heated-
Scrub Dry _ I
I
STEP 4
Start or Resume a Cycle
• Run hot water at the sink nearest your
dishwasher until the water is hot. Turn off water.
Push door firmly closed. The door latches I Start/
automatically. Select the wash cycle and • Resume
[]
options desired OR press Start/Resume to
repeat the same cycle and options as in the previous wash
cycle.
You can add an item anytime before the main wash starts.
Open the door slowly and add the item. Close the door firmly.
Press Start/Resume.
CYCLES OPTIONS
[] m [] m _ [] _ Control lock
m
Heavy
Was_ I NormalWash I[ China!Crystal l Super m SanitizedI II
[] [] []
Washing Drying Clean
[]
Start/
Resume
This information covers several different models. Your dishwasher may not have all the cycles and options described.
CYCLES DISH LOAD TYPES DESCRIPTIONS
Use for hard,to,clean, heavily This cYcle forces max time water and 1:39 2:09 3:30
soiled pots, pans, casse[oles, heat.
Heavy
Wast4 J and regular tab!eware.
m
Normal
Wash
Use for loads with normal
amounts of food soil.
The energy-usage label is based on this
cycle. During the wash, the wash action
will repeatedly pause for several seconds.
Cycle Cycle + Options *Maximum
Minimum Minimum
1:11 1:41 3:30
WASH TIME (HH:MM)
Cancel
You can customize your cycle by selecting an option.
See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can change
an option anytime before the selected option begins.
*Maximum wash times depend on water temperature, heavy soil condition, dish load size, and options selected.
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
Loads containing tough, Increases the target water temperature during the Wash HeaW Wash or Normal'
m baked.on food. portions of the cyc!e. Wash cycles.
Super
Scrub J Adds heat, Wash timeand Water to thecYclel
m
Sanitize
To sanitize your dishes and
glassware in accordance with
NSF/ANSI Standard 184 for
Residential Dishwashers.
Raises the water temperature in the final rinse to
approximately 155°F (68°C). This high temperature rinse
santizies your dishes and glassware in accordance with NSF/
ANSI Standard 184 for Residential Dishwashers. Certified
residential dishwashers are not intended for licensed food
establishments.
The Sanitize or Sani Rinse option adds heat and time to the
cycle.
Normal cycle. Heavy
Wash cycle
automatically uses
Sanitize. Only these
sanitization cycles have
been designed to meet
the NSF/ANSI
requirements.
m For best drying resu!tsl dry Turn OFF When loads contain p!astic dinnerware that maybe Heaw Wash, Normal
Heated_ I c"cles
Dry /_1 This option with the use of rinse aid will provide the best
dishes with heat. sensitive to high temperatures. Wash or China Crystal
drying perf0rmance.
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
Control
Lock
m
To avoid unintended use of
your dishwasher, or cycle and
option changes during a cycle.
To turn on Lock, press and hold Heated Dry for at least
4 seconds.
To turn off Lock, press and hold Heated Dry for at least
Anytime
4 seconds.
When Control Lock is lit, all buttons are disabled. If you press
any pad while your dishwasher is locked, the light flashes
3 times. The dishwasher door can be opened while the
controls are locked.
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the
cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle
will automatically compensate by adding time, heat and water as needed.
CONTROL PURPOSE COMMENTS
i To start or iesume a ifthe do0i is opened during a CYc!e0r the power is inteirupted, the Start/Resume light Will
wash CYC!e flash to indicate suspended cycle. The cyc!e wi!! not resume until the do0r is closed and the
Start/ ........................................ Start/Resume button Spushed. ..............................................................................................
Resume
m
Cancel ]
To cancel wash cycle Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher
drain completely.
[] To fo!low the progies s The C!ean indicator g!0ws When a Cyc!e is finished.
.... Ifyou select the Sanitize option, when the Sani Rinse cycle is finished, the Sanitized indicator
and status of your
Clean dishwasher cYCle glows. If :your dishwasher did not properly sanitize your dishes, the light flashe s at the end of
the cycle. This can happe n if the cycle is interruPted, or the water could not be heated to the
required temperature. The light goes off when you open and close the door or press
Loading...