JENN-AIR JCD2389GTB, JCD2389GTQ, JCD2389GTW Dimension Guide

www.dexpress.com DIMENSION EXPRESS Fax on Demand [phone]

This Data Sheet Includes Information On

Jenn-Air

• Product Model Number (s): •

Designer Line Side-By-Side Refrigerators:

JCD2389GTB, JCD2389GTQ and JCD2389GTW

• Dimensions (Actual Size) •

Height with hinge assembly, 0" leg adj.:

Height less hinge assembly, 0" leg adj.:

Case width:

Depth including handle:

Depth less handle:

Depth with refrigerator door open 90°:

Minimum opening height, 0" leg adj.:

Minimum opening width:

70"
69"
35 3/4"
28 1/2"
26 3/4"
46"
71 1/2"
36"

• Additional Information •

• Width (incl. handle) when doors are open 90° is
40 3/4".

• Electrical requirements: 120V, 60Hz, 15 ampere
fused electrical supply is required. An individual
branch (or separate circuit serving only this appliance
is recommended).

• Accepts panels to 1/4" thick. These dimensions
apply to panels included in the optional panel kits and
to any optional door panels.

• If panel is more than 0.25" thick, its edges must be
routed to 0.25" or less in thickness for installation.
When using a built-up or sculptured panel, a 2 1/2" area
adjacent to the door handles without buildup must be
available to provide adequate clearance for fingers.

Top View

(not to scale)

26 3/4"

Panel Size:

13 1/2" W

X

17 15/16" H

Panel Size:

13 1/2" W

X

36 3/16" H

35 3/4"

46"

35 3/4"

Front View

(not to scale)

Panel Size:

70"

19 5/16" W

X

67 7/16" H

Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of deter­mining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2002.

• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at [phone] •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.

102

BN130.61 • A102 • • 032603 • 95657 • 45032