Jenn-Air JCB2587WEY00, JCB2587WEF00 Owner’s Manual

THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,
please visit our website at www.jennair.com for additional information. If you still need assistance, call us at 1-800-688-1100. In
Canada, visit our website at www.jennair.ca or call us at 1-800-807-6777.

You will need your model and serial number, located on the inside wall of the refrigerator compartment.

Para obtener acceso a "lnstrucciones parael usuario del refrigerador" en espa_ol, o paraobtener informaci6n adicional acerca de
su producto, visite: www.jennair.com.

Necesitara su nQmero de modelo y de serie, ubicado en el interior del compartimiento del refrigerador.

TableofContents/Tabledes mati6res

REFRIGERATOR SAFETY ..................................................................... 1

REFRIGERATOR USE ........................................................................... 2

REFRIGERATOR CARE ......................................................................... 4

TROUBLESHOOTING ............................................................................ 5

ACCESSORIES ...................................................................................... 6

WATER FILTER CERTIFICATIONS ...................................................... 7

PERFORMANCE DATA SHEETS .......................................................... 8

WAR RAN TY .......................................................................................... 12

SI_CURITI_ DU RI_FRIGI_RATEUR ..................................................... 13

UTILISATION DU RI_FRIGI_RATEUR ................................................. 14

ENTRETIEN DU RI_FRIGI_RATEUR ................................................... 17

DI_PANNAGE ........................................................................................ 18

ACCESSOIRES .................................................................................... 19

FEUlLLES DE DONNI_ES SUR LA PERFORMANCE ........................ 20

GARANTIE ............................................................................................ 24

REFRIGERATORSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow
instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

W10168308A

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:

• Plug into a grounded 3 prong outlet.

• Do not remove ground prong.

• Do not use an adapter.

• Do not use an extension cord.

• Disconnect power before servicing.

• Replace all parts and panels before operating.

• Remove doors from your old refrigerator.

SAVE THESE INSTRUCTIONS

• Use nonflammable cleaner.

• Keep flammable materials and vapors, such as gasoline,
away from refrigerator.

• Use two or more people to move and install refrigerator.

• Disconnect power before installing ice maker (on ice maker
kit ready models only).

• Use a sturdy glass when dispensing ice (on some models).

• Do not hit the refrigerator glass doors (on some models).

Proper Disposal of Your Old Refrigerator

Suffocation Hazard

Remove doors from your old refrigerator.
Failure to do so can result in death or brain damage.

IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned refrigerators are still dangerous

- even if they will sit for "just a few days." Ifyou are getting rid of
your old refrigerator, please follow these instructions to help
prevent accidents.

REFRIGERATORUSE

Before You Throw Away Your Old Refrigerator or Freezer:

• Takeoff the doors.

• Leave the shelves in place so that children may not easily
climb inside.

the Con s

O°F .18°C RECOMMENDED 37oF 3oC

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.

Do not use an adapter.
Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

NOTE: Make sure the refrigerator is plugged into a grounded
3 prong outlet.

For your convenience, your refrigerator controls are preset at the
factory. When you first install your refrigerator, make sure that the
controls are still preset to the mid-settings as shown.

2

Fq

Fq

IM PORTANT:

FROZENFOOD

• The refrigerator control adjusts the refrigerator compartment
temperature. The freezer control adjusts the freezer
compartment temperature.

The displays normally show the actual temperatures inside the
refrigerator and freezer compartments. Sometimes,

temperatures may vary slightly in different areas of each
compartment. For example, frequently opening the door

allows air from the room to enter the compartment, exposing
door bins to room-temperature air. When reading the display,
keep in mind that it shows an average temperature for the
entire compartment. If you want to view the temperature you

set for the compartment rather than the actual temperature,
see "Viewing Set Points."

• Wait 24 hours before you put food into the refrigerator. If you
add food before the refrigerator has cooled completely, your

food may spoil.
NOTE: Adjusting the refrigerator and freezer controls to a

lower (colder) setting will not cool the compartments any
faster.

FRESHFOOD

rq

Turning Refrigerator On

• If the refrigerator is oft, press ON/OFF to turn the cooling on.

• To turn your refrigerator off, press ON/OFF. Your refrigerator
will not cool when the control is set to Off.

NOTE: Pressing the On/Oft button does not disconnect power
to the refrigerator. The interior lights will turn off if either
compartment door is open for more than 10 minutes. Simply

close and open the door to turn on the interior lights.

I On/Off I

Viewing Set Points

The factory recommended set points are 0°F (-18°C) for the
freezer and 37°F (3°C) for the refrigerator.

Set point range for the freezer: -6 ° to 6°F (-21 °C to -14°C)
Set point range for the refrigerator: 32° to 46°F (0°C to 8°C)

Toview the set point temperatures, press either the up or down
button for the refrigerator or freezer temperature. The display will

become brighter to indicate that you are viewing the set points.
Five seconds after an adjustment is made, the display lights will
dim and return to the actual temperature.

NOTE: During automatic defrost cycles, the actual temperature
displayed may be higher than the set point. This is normal. The

actual temperatures should return to the set points within a few
hours following completion of the defrost cycle.

Adjusting Controls

The mid-settings indicated in the previous section should be
correct for normal household refrigerator usage. The controls are
set correctly when milk or juice is as cold as you like and when ice

cream is firm.
If the temperature is too warm or too cold in the refrigerator or

freezer, first check the air vents to be sure they are not blocked.
If you need to adjust temperatures, use the settings listed in the

chart below as a guide. Wait at least 24 hours between
adjustments.

CONDITION/REASON: ADJUSTMENT:

REFRIGERATOR too warm REFRIGERATOR Control

1o lower

FREEZER too warm/too little ice FREEZER Control

1o lower

NOTE: While Max Cold is on, the display shows the Max Cold
temperature set points. After 24 hours or when Max Cold is

manually turned off, the set points will be returned to their
previous setting.

• Press MAX COLD to select this mode. Max Cold will stay on
for 24 hours or until it is manually turned off.

m

I MaxCold I

Sabbath Mode

Sabbath Mode is designed for the traveler who wishes to save
additional energy or for those whose religious observances
require turning off the lights and ice maker. In Sabbath Mode, the

temperature set points remain unchanged, the ice maker and
dispenser levers are disabled, and the interior lights turn off.

• Press SABBATH MODE to turn on the Sabbath Mode feature.
This feature will remain on until the Sabbath Mode key is
pressed again.

SabbathModeI

The control can be adjusted to properly chill meats or vegetables.
The air inside the pan is cooled to avoid "spot" freezing and can

be set to keep meats at the National Livestock and Meat Board
recommended storage temperatures of 28° to 32°F (-2 ° to 0°C).

The convertible drawer temperature control is preset to the

PRODUCE setting.

To Store Meat:

Set the control to one of the three MEAT settings to store meat at
its optimal storage temperature.

To Store Vegetables:

Set the control to PRODUCE to store vegetables at their optimal
storage temperatures.

NOTE: If food starts to freeze, move the control to the left (less
cold). Remember to wait 24 hours between adjustments.

_,,=*_'II+>,I@*,3"-_<*<= I I l_*dll I II%_1111 _<<,iI"_<+//<_II l%j/l

(O1_sO_"_@ l+<_OdJ®/S}

You can control the amount of humidity in the moisture-sealed
crisper. Adjust the control to any setting between LOW and HIGH.

LOW (open) for best storage of fruits and vegetables with skins.
HIGH (closed) for best storage of fresh, leafy vegetables.

REFRIGERATOR too cold REFRIGERATOR Control

1o higher

FREEZER too cold FREEZER Control

1o higher

Additional Control Panel Features

Temp Mode

• Press the °C button to select eitherCelsius or Fahrenheit
temperature displays.

m

Fq

Max Cold

Use Max Cold to speed cooling when large grocery loads are
added. Max Cold sets the refrigerator temperature to 34°F (1°C)
and the freezer temperature to -6°F (-21°C) for 24 hours.

The door air control is located on the left-hand side of the

refrigerator compartment.

A--

A. Door air control

Slide the door air control to the left to reduce the flow of cold
air to the bin or can rack and make it less cold.

Slide the door air control to the right to increase the flow of
cold air to the bin or can rack and make it colder.

After changing the filter, reset the display by pressing the button.
The display will read 99% when the system is reset.

Non-Indicator Water Filter (on some models)

Turning the Ice Maker On/Off

The On/Off switch is located on the top right-hand side of the
freezer compartment.

• To turn on the ice maker, slide the control to the ON (left)
position.

• To manually turn off the ice maker, slide the control to the OFF
(right) position.

NOTE: Your ice maker has an automatic shutoff. The ice maker
sensors will automatically stop ice production, but the control will

remain in the ON (left) position.
REMEMBER:

• Allow 24 hours to produce the first batch of ice. Discard the
first three batches of ice produced.

The quality of your ice will be only as good as the quality of the
water supplied to your ice maker. Avoid connecting the ice
maker to a softened water supply. Water softener chemicals

(such as salt) can damage parts of the ice maker and lead to
poor quality ice. If asoftened water supply cannot be avoided,
make sure the water softener is operating properly and is well

maintained.
Do not use anything sharp to break up the ice in the storage

bin. This can cause damage to the ice container and the
dispenser mechanism.

Do not store anything on top of or in the ice maker or storage
bin.

Removing and Replacing Ice Storage Bin

If your refrigerator does not have the water filter status light, you
should change the water filter cartridge at least every 6 months
depending on your water quality and usage. If the water flow to
the water dispenser or ice maker decreases noticeably before

6 months have passed, replace the water filter more often.

Changing the Water Filter

1. Press the eject button to release the filter from the base grille.

2. Pull the filter straight out.

3. Turn the cap counterclockwise to remove it from the filter.
IMPORTANT: Do not discard the cap. It is part of your

refrigerator. Keep the cap to use with the replacement filter.

4. Align the ridge on the cap with the arrow on the new filter and
turn the cap until it snaps into place.

NOTE: You can run the ice maker without a filter. Your water
will not be filtered. Simply insert the cap all of the way into the

base grille and rotate the cap until it is firmly in place.

5. Remove the covers from the O-rings. Be sure the O-rings are
still in place after the covers are removed.

6. Push the filter into the base grille. The eject button will pop
back out when the filter is fully engaged.

REFRIGERATORCARE

1=

Hold the base of the storage bin with both hands and press
the release button to lift the storage bin up and out.

NOTE: It is not necessary to turn the ice maker control to the
OFF (right) position when removing the storage bin. The
sensor cover ("flipper door") on the left wall of the freezer
stops the ice maker from producing ice if the door is open or

the storage bin is removed.

2=

Replace the storage bin on the door and push down to make
sure it is securely in place.

Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.

Water Filter Status Display (on some models)

The filter status display will help you know when to change your
water filter. When the display reads 10%, order a new filter. It is
recommended that you replace the filter when the display reads

0% OR when water flow to your water dispenser or ice maker
decreases noticeably. The filter should be replaced at least every
6 months depending on your water quality and usage.

Explosion Hazard

Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.

Both the refrigerator and freezer sections defrost automatically.
However, clean both sections about once a month to avoid

buildup of odors. Wipe up spills immediately.
IMPORTANT: Because air circulates between both sections, any

odors formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors. To avoid odor
transfer and drying out of food, wrap or cover foods tightly.

To Clean Your Refrigerator:

NOTE: Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, cleaning waxes,

concentrated detergents, bleaches or cleansers containing
petroleum products on plastic parts, interior and door liners or

gaskets. Do not use paper towels, scouring pads, or other harsh
cleaning tools.

1. Unplug refrigerator or disconnect power.

2. Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly. Use a clean sponge or soft cloth and a
mild detergent in warm water.

3. Washstainlesssteelandpaintedmetalexteriorswithaclean
spongeorsoftclothandamilddetergentinwarmwater.

Broken Glass Hazard

Do not hit refrigerator glass doors.
Protect glass surface and edges during installation or

removal of doors.
Failure to do so can result in serious eye injury or

minor cuts.

4.

On some models, wash glass door panels with a clean
sponge or soft cloth and a mild detergent in warm water.

NOTE: Do not hit the glass with pots, pans, furniture, toys, or
other objects. Scratching, hitting, jarring or stressing the glass

may weaken its structure, causing an increased likelihood of
breakage at a later date.

5.

There is no need for routine condenser cleaning in normal
home operating environments. If the environment is

particularly greasy or dusty, or there is significant pet traffic in
the home, the condenser should be cleaned every 2 to
3 months to ensure maximum efficiency.

If you need to clean the condenser:

• Remove the base grille.

• Use a vacuum cleaner with a soft brush to clean the grille,
the open areas behind the grille and the front surface area

of the condenser.

• Replace the base grille when finished.

6.

Plug in refrigerator or reconnect power.

NOTE: Not all bulbs will fit your refrigerator. Be sure to replace the
bulb with one of the same size, shape and wattage. On some
models, the dispenser light requires a heavy duty 1O-watt bulb. All
other lights require a 40-watt bulb. Replacement bulbs are

available from your dealer.

1. Unplug refrigerator or disconnect power.

2. Remove light shield when applicable.
NOTE: To clean the light shield, wash it with warm water and

liquid detergent. Rinse and dry the shield well.

3. Remove light bulb and replace with one of the same size,
shape and wattage.

4. Replace light shield when applicable.

5. Plug in refrigerator or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In the U.S.A., www.jennair.com In Canada, www.jennair.ca

The refrigerator will not operate

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.

Do not use an extension cord.
Failure to follow these instructions can result in death,

fire, or electrical shock.

• Power cord unplugged? Plug into a grounded 3 prong outlet.

• Is outlet working? Plug in a lamp to see if the outlet is
working.

• Household fuse blown or circuit breaker tripped? Replace
the fuse or reset the circuit breaker. If the problem continues,

call an electrician.
Control(s) on? Make sure the refrigerator control is on. See

"Using the Control(s)."
New installation? Allow 24 hours following installation for the

refrigerator to cool completely.
NOTE: Adjusting the temperature control(s) to coldest setting

will not cool the refrigerator more quickly.

The motor seems to run too much

Your new refrigerator may run longer than your old one due to its
high-efficiency compressor and fans. The unit may run even

longer if the room is warm, a large food load is added, the door is
opened often, or if the door has been left open.

The refrigerator seems noisy

Refrigerator noise has been reduced over the years. Due to this
reduction, you may hear intermittent noises from your new

refrigerator that you did not notice from your old model. Below are
listed some normal sounds with explanations.

• Pulsating - fans/compressor adjusting to optimize
performance.

• Hissing/Rattling-flowofrefrigerant,movementofwater
lines,orfromitemsplacedontopoftherefrigerator.

• Popping-contraction/expansionofinsidewails,especially
duringinitialcool-down.

• Water running/dripping - may be heard when ice melts

during defrosting and water runs into the drain pan.

The door will not close completely

• Door blocked open? Move food packages away from door.

• Bin or shelf in the way? Push bin or shelf back in the correct
position.

• Crisper cover in the way? Make sure the crisper cover is fully
pushed in, so that the back rests on the supports.

The door is difficult to open

The ice maker is not producing ice or not enough ice

• Refrigerator connected to a water supply and the supply
shutoff valve turned on? Connect refrigerator to water
supply and turn water shutoff valve fully open.

• Kink in the water source line? A kink in the line can reduce
water flow. Straighten the water source line.

• Ice maker turned on? Make sure wire shutoff arm or switch
(depending on model) is in the ON position.

• New installation? Wait 24 hours after ice maker installation
for ice production to begin. Wait 72 hours for full ice

production.

• Large amount of ice recently removed? Allow 24 hours for
ice maker to produce more ice.

• Ice cube jammed in the ice maker ejector arm?
Remove ice from the ejector arm with a plastic utensil.

• Reverse osmosis water filtration system connected to
your cold water supply? This can decrease water pressure.
See "Water Supply Requirements."

The ice cubes are hollow or small

Explosion Hazard

Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.

• Gaskets dirty or sticky? Clean gaskets and contact surfaces
with mild soap and warm water. Rinse and dry with soft cloth.

Temperature is too warm

New installation? Allow 24 hours following installation for the
refrigerator to cool completely.

Door opened often or left open? Allows warm air to enter
refrigerator. Minimize door openings and keep door fully

closed.
Large load of food added? Allow several hours for

refrigerator to return to normal temperature.

Control(s) set correctly for the surrounding conditions?

Adjust the control(s) a setting colder. Check temperature in
24 hours. See "Using the Control(s)."

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

• Humid room? Contributes to moisture buildup.

• Door opened often or left open? Allows humid air to enter
refrigerator. Minimize door openings and keep door fully

closed.

NOTE: This is an indication of low water pressure.

• Water shutoff valve not fully open? Turn the water shutoff
valve fully open.

Kink in the water source line? A kink in the line can reduce
water flow. Straighten the water source line.

Reverse osmosis water filtration system connected to
your cold water supply? This can decrease water pressure.

See "Water Supply Requirements."
Questions remain regarding water pressure? Call a

licensed, qualified plumber.

Off-taste, odor or gray color in the ice

New plumbing connections? New plumbing connections
can cause discolored or off-flavored ice.

Ice stored too long? Discard ice. Wash ice bin. Allow
24 hours for ice maker to make new ice.

Odor transfer from food? Use airtight, moisture proof
packaging to store food.

Are there minerals (such as sulfur) in the water? A water
filter may need to be installed to remove the minerals.

ACCESSORIES

To order replacement filters, call 1-800-442-9991 and ask for the

part number listed below or contact your authorized Jenn-Air
dealer. In Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:
Order Part #4396095

Standard Base Filter Cartridge:

Order Part #4396841 (T2RFWG2 and P2RFWG2)

6

WATERFILTERCERTIFICATIONS

Slate of California

Department of Health Services

Water Treatment Device

Certificate Number

05 - 1703

Date Issued: AprlI 6, 2(X)5

Date Revised: September 7, 2005

Trademark/Model Designation

Manufacturefl

to Section

Rated Service CapaciD,: 2(Xigals RatedServiceFlo_: 085gpm

Do not use with water that is microbiologicalIy unsal_ or of unknown quaIity, without adequate disinfection before or
after tbe system

Con ditions of Certification:

State of California

Department of Public I {catth

Water Treatment Device

Certificate Number

08- 1896

Date Issued: March 24, 2008

Trademark/Model Designation

2wG2 ............

P2WG2L

Manufacturer: Vv'l{_rtp_ol rp :, ....

Rated Service Capacity: 200 ga] R_e_ S_rvice How: 085 gpm

Do no{ use with water lhat is lnicrobioh)gically unsalE or of unknown quality, withotll adequate disinf '_tion belore or
after the system

Co nditi6ns of Certification!

State of California

Depamnent of Health Services

Water Treatment Device

Certificate Number

05 - 1702

Dale Issued: April 6, 2(105

Date Revised: September 7, 2005

Irademark/Model Designation ...... R_vlaeement Elements

WhMpoo]

Whirllx_ol

Manu facture_

Rated Service Capacity: 200gals Rated Service Flow: 05gpm

Do not use with water that is microbiologically unsafe or of u nknown quail*y, without adequate disinfection before or
after the system

Conditions of Certification:

Stale of Calilornia

Department of Public Health

Water Treatment Device

Certificate Number

08- 1895

Date Issued: March 24, 2008

Trademark/Model lieut,,nation Rerdacement Elements

P 1 WG2 P2RFWG2

PIWG2L P2RFwG2

Manufacturer: Whirlpodl Coxp

[_licrobiologicat COntaminants and Turbidit_

None

Orvanic Con_anlinants

Benzene

Rated Service Capacity: 700 gal Rated Service Flow: 05 gpm

Do nol u_e with water Ihat 1_ mlcrobiologicalI t unsat_' or ot unknown quality, without adequale dl_inli_efion bel_re o_
after tile system

Conditions of Certification:

PERFORMANCEDATA SHEETS

Base Grille Water Filtration System

Model T2WG2L/T2RFWG2 Capacity 200 Gallons (757 Liters)

Model T2WG2/T2RFWG2 Capacity 200 Gallons (757 Liters)

System tested and certified by NSF International against NSF/ANSI
Standard 42 for the reduction of Chlorine Taste and Odor, Particulate

Class I1";and against NSF/ANSI Standard 53 for the reduction of Mercury,

Benzene, Toxaphene, O-dichlorobenzene, and Carbofuran.

This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of the substances listed below. The
concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the

permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42 and 53.

Substance Reduction

Aesthetic Effects

Chlorine Taste/Odor
Particulate Class I1"

Contaminant
Reduction

Lead: @ pH 6.5***
Lead: @ pH 8.5***

Mercury: @ pH 6.5
Mercury: @ pH 8.5

Benzene
O-Dichlorobenzene

Toxaphene

Carbofuran

Test Parameters: pH = 7.5 _+0.5 unless otherwise noted. Flow = 0.85 gpm (3.2 Lpm). Pressure = 60 psig (413.7 kPa).
Temp. = 68°F to 71.6°F (2O°C to 22°C). Rated service capacity = 200 gallons (757 liters).

• It is essential that operational, maintenance, and filter •
replacement requirements be carried out for the product to

perform as advertised.

• Use replacement filter T2RFWG2, part #4396841.
2009 suggested retail price of $39.99 U.S.A./S43.99 Canada.

Prices are subject to change without notice.
Model T2WG2L: Style 1 - When the filter indicator reads 10%,

order a new filter. When the indicator reads 0%, it is
recommended that you replace the filter.

Style 2 - When the filter indicator changes from green to yellow,
order a new filter. When the indicator changes from yellow to red,

it is recommended that you replace the filter.
Style 3 - When the water filter status display changes from

"GOOD" to "ORDER," order a new filter. When the filter indicator
reads "REPLACE," it is recommended that you replace the filter.

Style 4 - Press FILTER to check the status of your water filter. If
the filter indicator light is yellow, order a new filter. If the filter
indicator light is red, it is recommended that you replace the filter.

Model T2WG2: Change the water filter cartridge every 6 months.
If the water flow to the water dispenser or ice maker decreases

noticeably before 6 months have passed, replace the water filter
cartridge more often.

NSF Reduction
Requirements

50% reduction
85% reduction

NSF Reduction
Requirements

0.010 mg/L

0.010 mg/L

0.002 mg/L

0.002 mg/L

0.005 mg/L

0.6 mg/L

0.003 mg/L

0.04 mg/L

Average Influent Challenge Maximum Average

Influent Concentration Effluent Effluent

2.0182 mg/L 2.0 mg/L + 10% 0.06 mg/L ** 0.0536 mg/L
1333333 #/mL At east 10,000 part c es/mL 6600 #/mL 2325 #/mL

Average

Influent

0.1533 mg/L

0.1400 mg/L

0.0058 mg/L

0.0059 mg/L

0.0154 mg/L

1.7571 mg/L

0.015 mg/L

0.0819 mg/L

Influent Challenge

Concentration

0.15 mg/L_+ 10%

0.15 mg/L_+ 10%

0.006 mg/L _+10%

0.006 mg/L _+10%

0.015 mg/L _+10%

1.8 mg/L _+10%

0.015 mg/L _+10%

0.08 mg/L _+10%

• The product is for cold water use only.

• Do not use with water that is microbiologically unsafe or of

• Refer to the "Warranty" section for the Manufacturer's name,

• Refer to the "Warranty" section for the Manufacturer's limited

These contaminants are not necessarily in your water supply.
While testing was performed under standard laboratory

conditions, actual performance may vary.

unknown quality without adequate disinfection before or after the
system.

address and telephone number.

warranty.

Maximum
Effluent

0.0005 mg/L

0.0007 mg/L

0.0002 mg/L

0.0005 mg/L

0.0012 mg/L

0.0250 mg/L

0.001 mg/L

0.0400 mg/L

Application Guidelines/Water Supply Parameters

Average
Effluent

0.0005 mg/L

0.0006 mg/L

0.0002 mg/L

0.0003 mg/L

0.0006 mg/L

0.0066 mg/L

0.001 mg/L

0.0213 mg/L

Water Supply City or Well
Water Pressure 30 - 120 psi (207 - 827 kPa)
Water Temperature 33° - 100°F (0.6° - 37.8°C)

Service Flow Rate 0.85 gpm (3.2 Lpm) @60 psi

Minimum %
Reduction

97.03

99.51

Minimum %
Reduction

99.67

99.50

96.54

91.57

92.22

98.58

93.33

51.13

Average %
Reduction

97.34

99.83

Average %
Reduction

99.67

99.57

96.54

94.92

96.34

99.63

93.33

74.00

*Class II particle size: 1 um to <5 um

**Test requirement is at least 100,000 particles/mL of AC Fine Test Dust.

***Compliant for Lead reduction requirements under NSF/ANSl Standard 53 as tested by Pace Analytical Services, Inc.

® NSF is a registered trademark of NSF International.

8