Jenn-Air GC460, GB460, A600, A607, A601 Dimension Guide
...
www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600
This Data Sheet Includes Information On
Jenn-Air
• Product Model Number (s): •
Food Waste Disposer:
GC460 and GB460
Kits: A600, A607, A601 and A602
4 1/2"
• Dimensions (Actual Size) •
Overall height:
16 1/8"
Largest unit circumference
(not including plumbing):
8 1/2"
Distance from top of ring to
centerline of dishwasher inlet:
2 7/8"
Distance from top of ring to
centerline of drain outlet:
8 13/16"
Distance from centerline of disposal
body to centerline of drain outlet:
6"
4 1/2"Ring width:
• Additional Information •
• Electrical requirements: 1/2 HP motor. Should be only
operated on 120 volt, 60Hz, AC. A 15 amp fuse or
circuit breaker should be used in conjunction with this
disposer.
• Unit can be permanently connected with a
non-metallic sheathed cable or comparable flexible
conduit. Or, if local codes allow, it can be connected
with a plug-in type power cord (16 gage SJT or SPT-3).
• GC460 : The on-off switch (not included) should be in
a convenient location between the disposer and the
power source.
• GB460 : Has the auto-start feature (does NOT require
a external switch).
• Fits any single or double, stainless steel, porcelain
enamel or cast sink up to 3/4" thick and with a 3 1/2" to
4" opening.
• The disposer should be connected to a drain line lower
than the disposer outlet.
• Center line of waste line should be lower than
centerline of drain elbow.
• A 1 1/2" to 2" drain line is recommended.
2 7/8"
16 1/8"
8 13/16"
Drain elbow
6"
8 1/2"
Side View (not to scale)
Kits:
• A600 : Used to attach a 1/2" drain hose to the
disposer.
• A607 : Used if the dishwasher drain hose is larger
than 1/2" I.D. Also, where a drain air gap is used.
• A601 : Jenn-Air power cord.
• A602 : "Do-It-Yourself" kit containing all parts
generally required to install a Jenn-Air waste disposer
using a plug in power cord (cord included).
Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2000.
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
189
BN253 • A189 • 27754 • 002906 • 105539 • 10515
Loading...