Page 1
G A L L E R Y
JEM ZR45
The JEM™ ZR45 is a high-end fog machine designed to deliver
superior and uninterrupted performance in demanding professional
applications. Via its enhanced and powerful 2,000 W heat exchanger,
the JEM ZR45 produces an exceptional peak output ideal for major
venues and stages in both install and rental markets.
The rugged yet weight-
optimized JEM ZR45 also features variable
output control for more subtle effects and is fully up-to-
date with
digital remote, DMX and RDM.
The entire JEM ZR range is compatible with a wide range of JEM Pro
fog fluids. As machines designed and built to last, the JEM ZRs will
continue to perform with great output and low consumption.
High endurance high-end fog machine
Exceptional performance and output
Various control options via digital remote, DMX and RDM
F E A T U R E S
T E CHNI CA L S P E CI F I CA T I O NS
Physical
Performance
Control and Programming
Construction
•
2,000 W (EU model) / 1,800 W (US model) heat exchanger
•
80 ml in 30 seconds peak performance
•
1300 m
³/min fog output
•
Variable output control for subtle effects
•9-
10 minute warm-up time
•
Digital remote, DMX and RDM
•
Compatible with a wide range of JEM Pro fog fluids
•
Floor standing or truss mounting (bracket included)
•
PowerCON TRUE1
•5-liter bottle
Length: 602 mm (23.1 in.)
Width: 395 mm (15.6 in.)
Height: 306 mm (12.1 in.)
Height including hanging bracket: 393 mm (15.5 in.)
Weight, dry: 17.7 kg (39.1 lb.)
Weight, filled: 22.7 kg (50 lbs.)
Coverage volume: 1300 m3 (45,909 ft3) per minute
Fluid consumption (max.): 210 ml per minute
Continuous effect output
Ready time: 10 minutes
Control options: Integrated digital remote control, DMX, optional analog remote
control, master/slave link mode, PLC (0-10V)
Control parameters: Continuous or timer-controlled output
Fog: Variable output control, 0-100%
DMX channels: 1
DMX compliance: ANSI E1.11 - USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20 RDM
Housing: Steel and aluminum
Hanging bracket: Integrated yoke w/safety attachment point
Color: Black
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and
are not necessarily representative of actual colors. Specifications are subject to change without notice
Page 2
Installation
Connections
Electrical
Thermal
Approvals
Included Items
Accessories
Ordering Information
Heat exchanger (US model): 1800 W, thermally protected
Heat exchanger (EU model): 2000 W, thermally protected
Fluid pump: Dual oscillating piston, high pressure
Fluid management: Fluid out sensing, sealed for transportation
Fluid reservoir: 5 l drop-in reservoir with quick-connect fitting
External fluid control: Fluid sensing
Remote control: Integrated Digital Remote with 3 m cable, 3-pin XLR
Mounting: Standing or hanging
Orientation: Up to +/- 40° from horizontal
Clearance around machine: 100 mm (4 in.)
AC Power: Neutrik PowerCON TRUE1
DMX, link mode in/out: 5-pin locking XLR
Remote control: 3-pin locking XLR
Firmware: AVR socket
EU model:
AC power: 220-240 V nominal, 50/60 Hz
Main fuse: 12.5 AT (slow blow), 250 V
Typical power and current: 2100 W, 9.2 A*
US model:
AC power: 100-130 V nominal, 50/60 Hz
Main fuse: 20 AT (slow blow), 125 V
Typical power and current: 1800 W, 15 A*
*Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:
Maximum ambient temperature (Ta max.): 40° C (104° F)
Exterior surface temperature, steady state: 30° C (86° F)
Max. nozzle temperature: 290° C (554° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
EU model
EU safety: EN 60335-1+A15, EN 62233
EU EMC: EN 61000-6-3
EU immunity: EN 61000-6-1
Australia/NZ (pending): RCM
US model
US safety: UL 998
Canadian safety: CSA C22.2 No. 104.01
Fluid reservoir, 5 l: P/N 34300506
JEM™ ZR Series Digital Remote Control: P/N 92765048
Power input cable, EU, powerCON TRUE1, stripped ends, 3 m (9.8 ft.): P/N 11501043
Power input cable, US, 20A, powerCON TRUE1, molded NEMA 5-20P, 2 m (6.6 ft.): P/N
11501046
JEM™ ZR45 Ducting System with 5 m (16.4 ft.) ducting: P/N 92625014
JEM™ ZR Series PLC Interface: P/N 92765049
Power cables
Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX
W (female), 1.5 m (4.9 ft.): P/N 91611797
Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX
W (female), 5 m (16.4 ft.): P/N 91611786
Power connectors
Cable connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789
Cable connector, PowerCON TRUE1 NAC3MX-W, 16 A, male: P/N 05343418
Approved fluids
JEM™ Pro Smoke Studio
JEM™ Pro Smoke Super
JEM™ Pro Smoke High Density
JEM™ I-Fog Fluid
JEM™ Pro Steam Simulation
JEM™ Pro Clean Supreme
Various sizes available - contact your dealer or see 'Fluids' product pages for details
Installation hardware
G-clamp: P/N 91602003
Half-coupler clamp: P/N 91602005
Quick trigger clamp: P/N 91602007
Service tools
Epsilon 5 AVR Programmer: P/N 50502004
Temperature Calibration Box: P/N 92620005
JEM™ ZR45, EU: P/N 92215360
JEM™ ZR45, US: P/N 92215370
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and
are not necessarily representative of actual colors. Specifications are subject to change without notice
Loading...