
JEM ZR25
The JEM™ ZR25 is a small, yet powerful fog machine designed to
deliver superior and uninterrupted performance in demanding
professional applications. Via its 1,150 W heat exchanger, the JEM
ZR25 produces large amounts of fog ideal for small to medium-
sized
venues and stages in both install and rental markets.
The JEM ZR25 features variable output control for more subtle effects
and is fully up
-to-
date with digital remote, DMX and RDM.
The entire JEM ZR range is compatible with a wide range of JEM Pro
fog fluids. As machines designed and built to last, the JEM ZRs will
continue to perform with great output and low consumption.
Small but powerful fog machine
Exceptional performance and output for its size
Simple plug
-and-play operation via remote control or DMX
F E A T U R E S
T E CHNI CA L S P E CI F I CA T I O NS
Physical
Performance
Control and Programming
Construction
40 ml in 30 seconds peak performance
Variable output control for subtle effects
Digital remote, DMX and RDM
Compatible with a wide range of JEM Pro fog fluids
Floor standing or truss mounting (bracket included)
Length: 485 mm (19.1 in.)
Width: 335 mm (13.2 in.)
Height: 242 mm (9.6 in.)
Height with hanging bracket: 333 mm (13.2 in.)
Weight, dry: 11.2 kg (24.7 lbs.)
Weight, filled: 13.7 kg (30.2 lbs.)
Coverage volume: 600 m3 (21,189 ft3) per minute
Fluid consumption (max.): 100 ml per minute
Continuous effect output
Ready time: 7 minutes
Control options: Integrated digital remote control, DMX, optional analog remote
control, master/slave link mode, PLC (0-10V)
Control parameters: Continuous or timer-controlled output
Fog: Variable output control, 0-100%
DMX channels: 1
External fluid control: Fluid sensing
DMX compliance: ANSI E1.11 - USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20 RDM
Housing: Steel and aluminum
Hanging bracket: Integrated yoke with safety attachment point
Color: Black
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and
are not necessarily representative of actual colors. Specifications are subject to change without notice

Installation
Connections
Electrical
Thermal
Approvals
Included Items
Accessories
Ordering Information
Heat exchanger: 1150 W, thermally protected
Fluid pump: Oscillating piston, high pressure
Fluid management: Fluid out sensing, sealed for transportation
Fluid reservoir: 2.5 l drop-in reservoir with quick-connect fitting
External fluid control: Fluid sensing
Remote control: Integrated digital remote with 3 m cable, 3-pin XLR connector
Mounting: Standing or hanging
Orientation: Up to +/-40° from horizontal
Clearance around machine: 100 mm (4 in.)
AC power: Neutrik PowerCON TRUE1
DMX and link mode in/out: 5-pin locking XLR
Remote control: 3-pin locking XLR
AC power: 220-240 V nominal, 50/60 Hz
Main fuse: 6.3 AT (slow blow), 250 V
Typical power and current: 1200 W, 5.3 A*
AC power: 100-130 V nominal, 50/60 Hz
Main fuse: 10 AT (slow blow), 125 V
Typical power and current: 1050 W, 8.8 A*
*Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:
Maximum ambient temperature (Ta max.): 40° C (104° F)
Exterior surface temperature, steady state: 30° C (86° F)
Max. nozzle temperature: 290° C (554° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
EU safety: EN 60 335-1+A15, EN62233
EU EMC: EN 61000-6-3
EU immunity: EN 61000-6-1
Australia/NZ (pending): RCM
US model
US safety: UL 998
Canadian safety: CSA C.22.2 No. 104.01
Fluid reservoir, 2.5 l: P/N 34300521
JEM™ ZR Series Digital Remote Control: P/N 92765048
Power input cable, EU, PowerCON TRUE1, stripped ends, 3 m (9.8 ft.): P/N 11501043
Power input cable, US, 10 A, PowerCON TRUE1, molded NEMA 5-15P, 3 m (9.8 ft.): P/N
11501044
JEM™ ZR25 Ducting System with 5 m (16.4 ft.) ducting: P/N 92625012
JEM™ ZR Series PLC Interface: P/N 92765049
Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX
W (female), 1.5 m (4.9 ft.): P/N 91611797
Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX
W (female), 5 m (16.4 ft.): P/N 91611786
Power relay cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, UL, VDE, PowerCON TRUE1
in/out connectors, 0.7 m (2.3 ft.): P/N 11541514
Power relay cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, UL, VDE, PowerCON TRUE1
in/out connectors, 1.5 m (4.9 ft.): P/N 11541512
Power relay cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, UL, VDE, PowerCON TRUE1
in/out connectors, 3.25 m (10.7 ft.): P/N 11541511
Cable connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789
Cable connector, PowerCON TRUE1 NAC3MX-W, 16 A, male: P/N 05343418
JEM™ Pro Smoke Studio
JEM™ Pro Smoke Super
JEM™ Pro Smoke High Density
JEM™ I-Fog Fluid
JEM™ Pro Clean Supreme
Various sizes available - contact your dealer or see 'Fluids' product pages for details
G-clamp: P/N 91602003
Half-coupler clamp: P/N 91602005
Quick trigger clamp: P/N 91602007
Epsilon 5 AVR Programmer: P/N 50502004
Temperature Calibration Box: P/N 92620005
JEM™ ZR25, EU: P/N 92215320
JEM™ ZR25, US: P/N 92215330
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and
are not necessarily representative of actual colors. Specifications are subject to change without notice

Ducting system,
JEM ZR25
P/N: 92625012
POWER CABLE
H07RN
-F OPEN-
TRUE1 1,50M
P/N: 91611797
POWER CABLE
H07RN
-F OPEN-
TRUE1 5,00M
P/N: 91611786
POWER
CONNECTOR
POWERCON TRUE1
FEMALE
P/N: 91611789
SAFETY CABLE,
60KG, BGV C1
P/N: 91604006
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and
are not necessarily representative of actual colors. Specifications are subject to change without notice