JDS Uniphase MTS-8000 User Manual
ACTERNA TEST & MEASUREMENT SOLUTIONS
WEBSITE: www.jdsu.com/fiberoptictest
Transport Module
• All in one module for
Full PDH/T-Carrier & SDH/SONET test-
ing up to 10 Gb/s
Ethernet testing 10/100/1GigE/
10GigE LAN & WAN up to the IP layer
Dispersion Modules
• PMD – Polarization Mode Dispersion
• CD – Chromatic Dispersion
MTS-8000 Portable Optical Network Tester
All your optical network testing needs covered in a single platform
The power of one, performing
the work of many
A powerful unit
• Flexible scalable platform
• Industry-leading size and weight, e.g. plat-
form + transport module < 7 kg
• Interchangeable modules
• Generates test results in seconds
• Fully automatic testing
• Combination of several tests
• Remotely controlled (via Ethernet, Fiber)
Fiber Characterization Testing
• Optical Time Domain Reflectometer
(OTDR)
• Chromatic Dispersion (CD)
• Polarization Mode Dispersion (PMD)
• Attenuation Profile (AP)
• Loss testing
CWDM/DWDM Testing
• OSA with frequency range from 1250 nm to
1650 nm
• DWDM parameters OSNR, optical channel
power, wavelength deviation
• Application for EDFA and DFB testing
• Channel isolation for BER analysis
• Single or dual port analyzer
Amplified DWDM system analysis
Pass/Fail OTDR analysis
OTDR Module
• More than 20 OTDR modules
• Combined wavelengths MM: 850/1300
SM: 1310/1383/1550/1625 nm
• Dynamic range 30 dB up to 50 dB
MTS-8000 Tester
2
Automatic bi-directional
measurement function
• Automate the acquisition process
• Check fiber continuity
• File transfer through the fiber
• True splice loss with both end analysis
• Optical talkset option needed
Bi-directional OTDR analysis
1
1
1
1
1
2
3
4
Pulse delay method complies with TIA/EIA FOTP-168
DUT
Polarized
Broadband
Source
Analyzer
OSA
PMD test results with Pass/Fail analysis
Local
Remote
MTS-8000 00286
UHD 1310/1550/1625 nm
MTS-8000 00439
UHD 1310/1550/1625 nm
Tested fiber
Data
PC software solution for report generation
OFS-100 Results Analysis
• OTDR, CD, PMD, AP, and OSA results
analysis
• Batch processing capability via automation
process
• Pass/Fail function
• Customized printouts
OFS-200 FiberCable Acceptance
Report Generation
• Complete fiber characterization reporting
capability including bi-directional OTDR,
CD, PMD, AP, IL and ORL results
• Advanced OTDR evaluation for loop back
and mid-point management
• Powerful report preview
• Direct access keys for easy process and
efficiency
Single menu for chromatic dispersion trace and table
display
Fiber Characterization
CD Module
• Pulse delay method complies with TIA/EIA
FOTP-168
• Fast single-end measurement with sectional
analysis capability
• CD analyzer and four-wavelength OTDR
(1310/1480/1550/1625 nm) with one module
Physical Fiber Testing
Key features OTDR
• Fast data acquisition enables VHD plug-in
to reach 40 dB aer 10 s with a maximum
performance up to 45 dB
• Highest dynamic range with 50 dB at
1550 nm, UHD module
• New VLR module with outstanding dead
zone of 0.8 m EDZ and 4 m ADZ, 43 dB
dynamic
• Fastest scan speed at 0.1 s in real-time mode
• Up to 128000 acquisition points with sampling resolution down to 4 cm
Built-in Optical Talkset
• Data transfer capability: file exchange or
remote control
• Used also for fully automatic bi-directional
measurements
• OTS-55 handheld for far end communication
PMD Module
• Fixed analyzer method standardized by
ITU-T, IEC and TIA/EIA
• Fast measurement time – from just
6 seconds
• Measure through multiple EDFAs
Loading...