J Communications Co JGG2002 Users Manual

3. INSTRUCTION MANUAL

3.1 Key Name

FUNCTIONS AND CONTROLS

1) Antenna

2) Push-To-Talk (PTT) Button

3) Monitor Button

4) Mark & Power Button

5) External M IC / Speaker

6) Up /Down/Enter Button & Volume Control

7) Page Button

8) Charging Jack

9) Built-in Speaker

10) Built -in Microphone

11) LCD Panel

12) Battery Door Button

3.2 ICONS on LCD

132 * 64

Dots

132 * 64 dots with ICONS

1) TX Indicator

Appears when a signal is being transmitted.

2) RSSI (Receiving Signal Strength Indicator)

Indicates the receiving signal strength

3) CTCSS Indicator

Blinks when the correct CTCSS tone is entered.

4) Seek Scan Indicator

Appears in the seek scan mode or when the seek scan mode is

activated.

5) Priority Scan Indicator

Appears in the priority scan mode or when the priority scan

mode is activated.

6) VOX Indicator

Blinks in VOX selection mode or appears when VOX is activated.

7) Key Lock Indicator

Blinks in auto lock selection mode or when the key lock is

activated.

8) GMRS Indicator

Appears GMRS is activated.

9) GPS Indicator

Appears GPS is activated.

10) Battery Level Indicator

Battery Level Meter indicates the remaining battery strength.

3.3 Key Function

3.3-1 Power On/Off & Mark Button(#4)

1) Short Touch

a) Under Power off

Press this button (#4) briefly to turn the unit on.
A short Confirming melody will play.

b) Under Power on

Press this button (#4) briefly to go Mark Page.

2) Long Touch

a) Pressing this button (#4) for more than 1.5 seconds to turn the

unit off.

3.3-2 Up/Confirm/Down Button (#6)

1) Up Button

a) Short Touch

– In the Standb y page, press this button briefly to move to the

next higher main volume level.

– In the Map page, press this button briefly to view a larger

area.

– In the Pointer page, press this button briefly to cycle through

other trip computer information such as average speed, maximum
speed, moving direction (heading), bearing, location, eleva ­ tion, time of sunrise/sunset, trip timer and trip odometer.
– In the GPS menu page & Setup page, press this button briefly to

shift the current item in each menu to the next item in the
same menu.

b) Long Touch

 Pressing this button for more than 1.5 seconds will allow you
to navigate at a more rapid rate through different items in the
each page.

2) Down Button

a) Short Touch

- In the Standby page, press this button briefly to move to the next lower
main volume level.

- In the Map page, press this button briefly to view a smaller area.

- In the Pointer page, press this button briefly to cycle through other trip
computer information such as average speed, maximum speed, moving
direction (heading), bearing, location, elevation, time of sunrise/sunset,
trip timer and trip odometer.

- In the GPS menu page & Setup page, press this button briefly to shift the
current item in each menu to the previous item in the same menu.

b) Long Touch

Pressing this button for more than 1.5 seconds will allow you to
navigate at a more rapid rate through different items in the each
page