J Communications Co FR1500XTM Users Manual

J COMMUNICATIONS CO., LTD.
FCC ID : OAJFR1500XTM
JOB # : 298AK1
EXHIBIT # : 6

FR1500XTM

Operating Manual

J Communications Co.,

KEY Definition

(1) POWER KEY

1) Short key

- Press the Power button shortly to turn the unit on.

2) Long key (In case of pressing and holding more than

1.2sec)

- After saving all information to EEPRO, the unit is

(2) MODE KEY

Ltd.

turned off.

1) Short key – increasing a Mode up.

2) Long key - turning to the TWO-WAY mode, first mode.

(3) MENU KEY

1) Short key – increasing a Menu up.

2) Long key - making the Key locked and disabled.

(4) Shift/Key lock

1) Short key – shifting Cursor.

2) Long key - releasing Key lock function.

(5) UP

1) Short key – increasing Volume or current item.

2) Long key - increasing Volume or current item at a more

rapid rate.

(6) DOWN

1) Short key – decreasing Volume or current item.

2) Long key - decreasing Volume or current item at a more

rapid rate.

(7) MONITOR

- This key is used to check the active channel before

transmitting. If you press and hold the monitor key for
more than 3 seconds, the unit monitors the receiving
signal continuously. To stop auto monitoring, press the
monitor key shortly.

(8) PTT

- Pressing and holding this button will allow you to

speak to any transceiver that is set to the same
channel and privacy code setting as yours.

- Pressing the button twice quickly will allow you to

transmit a calling to another party on the same
channel.

LCD icon display

: VOX icon – appears when VOX mode is activated.
: SCAN icon –appears when Scan mode is activated.

: ALARM icon - appears when Alarm mode is On

: WEATEHR ALERT icon –appears when Weather alert is

selected

mode is

: VIBRATOR CALL icon –appears VIB in the call

selected.

activated.

displayed

is displated.

! POWER ON AND OFF OPERATION

: BUSY icon – appears carrier detect in the two way

channel

: KEY LOCK icon –appears when key lock mode is

: CHANNEL icon –appears when Two way channel is

: CTCSS Code icon –appears when code of Two way channel

:BATTERY strengtt icon –indicates the battery charge
strength.

0.POWER ON OPERATION
If you press the Power key, user’s name is shown on
LCD for a second with an initial beeping.

1. POWER OFF OPERATION

To turn it off, press and hold the Power key for
more than 1.2 seconds. The unit will save the set
data before it shuts off.

2. AFTER POWER ON INITIAL DISPLAY

Indicates channel, code, Battery balance

! DETAILED MENU BY MODE

1. TWO WAY MODE

After 1 second