J Communications Co BGP2000 Users Manual

B/T GPS RECEIVER

(BGP-2000)

OPERATING GUIDE

Acknowledging Special Precautions and the FCC Industry Canada Notice Cautions

Modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.

FCC compliance Information

This device complies with part 15 of FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received.
Including interference that may cause undesired operation.

Information to User

This equipment has been tested and found to comply with the limits for a Class B digital device,
Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio Frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio comm unications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

J Communications Co., Ltd.

Getting Started

1. Introduction

This GPS Receiver is the mobile GPS receiver integrated with Bluetooth technology.

The BGP-2000 offers flexible and various location awareness application for both

consumer and corporate usages.

2. General Features

Your BGP-2000 is an excellent navigation and positioning aid tool when using with

mobile terminal devices of Bluetooth enabled, which the host with GPS application

software installed. The general features are

 Best mobile GPS receiver for consumer and corporate

 GPS receiver with Bluetooth transceiver built-in

 Provides fully interoperability with Bluetooth integrated mobile devices

 Ultra-low power consumption

 Long operation time ( 8 hours)

 LED lights indicate GPS status, Bluetooth connection and battery condition

 Embedded high sensitivity GPS active antenna and Bluetooth antenna

 Compatible with all GPS map running on various hardware platforms

 Navigating freely without wire connection to host mobile devices.

3. Prepare to use you BGP-2000 Receiver

To help you begin to use your BGP-2000 receiver, read this user guide in the first

step. This user guide explains the detail how BGP-2000 operates, functions, and

common features of the BGP-2000.

Before you begin using your BGP-2000, you must complete the application software

installation tasks on your host device like PDA mobile phone, MMS mobile phone,

handheld PC, and portable PC hardware. For information about the hardware

operation and application software installation, please refer to the documentation that

accompanies each product.

4. GPS signal reception

The BGP-2000 offers high position accuracy and fast Time-To-First-Fix (TTFF),

which rely on environment circumstances where receiver located as well as initial

states of the receiver. During attempting to a position fix, the receiver needs to lock

on to at least 3 satellites and, uses the signal can be received as well as the data of
latest position stored in the receiver’s digital memory in order to compute the

location of the device.

Environmental factors that influence the position accuracy and TTFF including such

as

Tall buildings,

Narrow street and passageway,

Protection film on glass,

Heavy foliage,

Large cliffs,

and other obstructions where the satellite signals may blocked, and, poor satellites

geometry situation. Initial state of the receiver, means latest status in memory of the

receiver, may mainly determine the time of TTFF. Position can be quickly fixed within

only 10 seconds from a hot-start state and needs 45 seconds typically from a cold-

start state. Or, might need at least 3 to 5 minutes from a completely restart-state, for

example, flying a distance over 500 kilometers from initial origin.

BGP-2000 uses the satellite signals to calculate an exact geodetic location through

triangulation method, contained in 10 meters CEP accurateness devoid of Selective

Availability (SA), which is good enough for general location awareness purposes. The

position data is then converted within the receiver to latitude and longitude

coordinates, which is usually provided in the geodetic datum on which GPS is based

(WGS84). Position offsets of hundreds of meters or much more can result from using

the wrong datum.

In addition to datum used, there are number of positioning errors can occur, limiting

accuracy. The major errors including satellites orbiting error, poor satellites

geometry, multi-path signals, atmospheric delay and receiver clock timing.

5. Caution and Warning

BGP-2000 contains a rechargeable Ni-MH battery which supplies the power for the

of GPS and Bluetooth operation. Care and caution must take into account are :

 Only use the charger supplies with the BGP-2000. Use other charger can damage

the BGP-2000 and even dangerous at the risk of explosion.

 Do not expose BGP-2000 to high temperatures higher than 85C such in car under

direct sunshine. Expose BGP-2000 to high temperatures environment can not only

shorten the life of electronic devices and melt or drape certain plastics, but also

can damage the battery and even dangerous at the risk of explosion.

 Do not try to open or break the receiver. There is no service accessory part

inside the receiver. Open the receiver will void the warranty.

Designation

1. Power Switch

2. LED Indicators

- Battery Status LED (Blue)

- GPS status ( Green)

- Bluetooth status (Red / Green)

3. Power Jack ( DC 5V)

4. Optional External Antenna Connector Port (MCX type)

5. Reserved Port