J Communications Co BAG-2000 User Manual

AGM(BAG-2000) of User Manual

Overview

BAG-2000(with BH-1000) utilizes 2.4GHz Bluetooth technology to provide hands-free
and wire-free communication for your headset-ready mobile phone.
Designed for maximum comfort and ease of use, this is tailored to suit mobile phone.
It makes you wireless connection between the mobile phones which recognize ring
sounds through a ear phone jack and the Bluetooth Headset.
And This guide will help you set up and use BAG-2000(with BH-1000).
BAG-2000 supports the Headset Profile as an Audio Gateway device.

Connecting to your handset.(BAG-2000)

1. Select a location on your Handset to attach
BAG-2000 and attach BAG-2000.

2. Connect BAG-2000 cord to the headset-jack

on your handset

Putting On the Headset.(BH-1000)

1. Put on the Headset with the ear
hook behind your ear.

2. Make sure the microphone is pointing
towards your mouth.

Ear hook

①

②

Microphone

Pairing the Headset with BAG-2000

Before you start using the Headset for the first time, you mus t pair the Headset with
the BAG-2000.

-Before you start pairing, you must reset the Headset. And then Headset will go to
pairing mode.

1. Press the three keys, Volume Up, Down and Talk button simultaneously with
the Headset turned on.
To ensure, press the keys(Up, Down and Talk button) in 2 or three times.

Down

2. Wait until hear a short melody tone and then turn the Headset off .

Up

Talk

ON/OFF

-To pair the Headset(BH-1000)t with a

Bluetooth

Audio-gateway(BAG-2000)

1. With a BAG-2000 turned on, press and hold the rest button for up to 2 or
3seconds.

Reset Button

Indicator

ON/OFF

2. Turn a BAG-2000 off and turn it on.

3. At this time, turn the Headset on again and will be disappeared the indicator
light flash on BAG-2000 if the pairing has been completed in successful.

Make sure the Headset and a BAG-2000 are not too far apart.

4. Turn the BAG-2000 and Headset off and turn on, at this time you can hear
short melody from Headset

.

5. Attach a BAG-2000 to the handset.