JCM Free User Manual
COD. 1247030-GB / 1.1
FREE 15 R / FREE 30 R
Hands free activator.
TECHNICAL CHARACTERISTICS
FREE 15 R FREE 30 R
Operating frequency 125kHz
Electricity 12/24V(ac)/(dc) +/- 10%
Consumption 50mA
Radiated power <25mW
Wiring 4 wires
Op. temperature -20ºC - +55ºC
Airtightness IP66
Size 87 x 78 x 15,5 mm 205 x 183 x 14 mm
Enabling area (hands-free mode) 1.5m 3m
INSTALLATION (figure A)
The activator is formed by two parts: a compact box (1) with a plastic front part and the wiring
outlet at the back and an adhesive trim (2). It is designed to be fitted directly to or built into the
wall. It is secured by two screws (3), separated by 60mm (ideal separation if it is built-into a
standard plug or socket box). The adhesive is fitted over Position 2 in the Figure, ensuring that the
led (5) is visible through the adhesive window. Before fitting the adhesive, screw in and configure
the activator.
N.B.: The activator should not be installed on metal surfaces, as this may reduce the enabling area.
1
COD. 1247030-GB / 1.1
FREE 15 R / FREE 30 R
2
Loading...