JCG JWA-2018R User Manual

Portable 3G Wireless Router

Quick Installation Guide

5 IN 1:Power bank,3G Hotspot, Mini AP, cloud storage, multimedia share
Product pictures are only for reference and please consult the objectives

Package Contents

1. 1 x product

2. 1 x Quick installation Guide

3. 1 x USB Charging Cable

4. 1 x connecters

5.The 3G Dongle’s FCC ID:Q78-K5006-Z,Model:K5006-Z

Overview

Charging Instruction (mobile power)

(1) Powering off for charging: Push the switch to gear C, then select
the correct tip for your device and connect the charger lead of the
digital product to the USB port. Then it will charge the intelligent
mobile phone of iPhone, iPad and other smart phone.

(2) Powering on for charging: Push the switch to gear R, then select
the correct tip for your device and connect the charger lead of the

digital product to the USB port. Then it will charge the intelligent
mobile phone of iPhone and other smartphone. The charge current is 500mA.

(3)Charging the Power Bank: Connect the Micro USB tip to the Input port
of the Power Bank, then plug the USB connector into an empty USB port
on your Laptop/PC, or other USB power equipment.

Check power method

(1) Method to see the battery electric quantity: no matter what condition
I6 is in, press the display button of electric quantity (beside
the switch) and then observe the electric quantity according to the
indication status of the electric quantity lights (if four lights
are on, it shows that the battery is fully charged).

(2) Method to see the battery with a full charge: charging is done under
the condition of powering off, if the blue light is one, it indicates
charging and if the blue light is off, it shows that the battery is fully charged.

Instruction to the connection of the wireless network

The computer is connected to the operating instructions of I6 (XP)
(1) Choose “wireless network connection ”in the pro pert y option of the

“network connection” on the desktop. Following the instruction of the

picture, set the computer Internet protocol to be “Obtain an IP Address

Automatically”.

(2) Then, there will be an icon

at the bottom right corner of the

computer. Right click the mouse and choose “View Available Wireless

Networks” in the prompt box.

(3) In the pop-up network list, choose the required wireless
network: MiFi_XX, click the “connection” button and input
the password of WIFI. Factory default of WIFI no password

(4) When the interface displays “Already Connected”, which indicates
that the computer is successfully connected to this wireless network.

Modification of the WIFI Name and Password.

(1) Through WIFI, connect the Internet device wirelessly to I6, input

192.168.169.1 into the address bar of the device’s browser and enter the
management interface.

(2)Modify the WIFI Name and Password in the interface of wireless setting