company
Skytile® Base Range
595
59
32
Installation instructions for Skytile® Base recessed LED panels
Warnings and cautions
• To avoid electric shock, serious injury or property damage, isolate
power before installing, removing or servicing the product
• It is recommended that luminaires are installed by a qualied
electrician and the installation complies with the local current
wiring regulations
• Any broken or damaged parts should be replaced as soon as possible
JCC will not accept responsibility for claims arising from any
sub-standard installations
• It is recommended that the ambient room temperature should not
exceed 25°C
• These products are designed for connection to a mains supply of
220-240V~ 50/60Hz
• This luminaire is suitable for indoor use only
• It may be necessary to upgrade your MCBs to allow for increased
inrush current
• Do not cover with insulation
• Do not carry out insulation tests with the product connected to
the circuit
a
INSTALLATION
• Read instructions and check that you have all of the tools and accessories required to complete the installation correctly. Isolate power supply
before starting the installation.
Type Wattage Colour Temp Lumens LpcW
600 x 600
TP(a) 30W 4000K 3000 100
TP(b) 30W 4000K/5000K 3150 105
Specications Ra: 83
Wiring connection
220-240V 50/60Hz / Class II
Fig. 1. Mains Input Cable
Neutral: Blue
Live: Brown
Terminal block must comply to EN 60998-2-1 or EN 60998-2-2
700mA/27-42V DC / Class III
Fig.1.a. Luminaire connection
Plug & Play Connectors
Non-dimmable
Standard non-dimmable/dimmable luminaire installation
1. Remove the ceiling tile or tiles from the location where you wish to install
the LED panel.
2. Wire the LED driver to the mains supply as indicated in gure 1. If a
dimmable variant, connect the dimming control wires (DALI/1-10V) as
shown in gure 2.
3. Move LED panel into the ceiling aperture and when positioned halfway
connect the driver low voltage output to the LED panel (luminaire) as
shown in gure 1.a.
4. Position the LED panel into place in the grid ceiling.
5. Reconnect mains power supply and test for operation.
ENGLISH
DALI/1-10V dimmable700mA/6-43V DC / Class III
Dimming control input
Figure 2.
DALI control wires
DA +
DA -
1-10V control wires
+
-
Prole & Dimensions
5
All dimensions in millimetres
V7_Aug_2022_RS
Important warranty information
This product is supported by a 2-year standard warranty which will extend to 5-years if registered within the first year of pu
Please register at jcc.co.uk/warranty (Terms and conditions apply).
The installer will be asked to provide the following information, which is detailed on a label attached to the luminaire’s chas
Product Code/Date Code.
BS EN ISO9001 - 2015 - Registered Firm Certificate No. GB 1552
Grid ceiling
LED
Panel
Ceiling Fix
Suspension
Wire
Panel Fixing
Bracket
Surface mounting box
Surface Mounting
JCC can also supply a
Surface Mounting Tray.
Please ensure there
is adequate clearance
around the tting to
allow access
to the panel.
Mounting options
JC71262- 600 x 600mm
JC71295- 1200 x 600mm
JC71299- 1200 x300mm
Wire suspension
Suspension Mounting
JCC can also supply a Wire Suspension Kit for
applications where a ceiling grid is not available
JC080050 - 4 wire 1.5m Suspension Kit for use
with Skytile Base (JC080046-49 & JC080051-52)
You can help protect the environment. Please remember to respect the local regulations: hand in the non-working electrical equipment to an
appropriate waste disposal centre.
The packaging material is recyclable. Dispose of the packaging in an environmentally friendly manner and make it available for the recyclable
material collection service.
RoHS
Compliant IP20
JCC Lighting Products Ltd. Lux Park, Chichester Business Park, City Fields Way, Tangmere, Chichester, West Sussex, PO20 2FT
Technical Support: +44(0)1243 838986 Customer Services: +44(0)1243 838999
Recommended remote emergency packs:
JCEM002- JCC Emergency Remote Pack
JCEM002ST -JCC Emergency remote pack self-test
rchase.
sis:
jcc.co.uk
Loading...