JBL Professional EON10 G2 User Manual

EON10 G2 User Guide

Part Number: 981-00061-01

PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

AGENCY APPROVALS AND CERTIFICATIONS . . . . . . . . . . . . . . . . . . . . .4

BEFORE YOU BEGIN - IMPORTANT INFORMATION . . . . . . . . . . . . . . . . .4

Mounting / Suspending EON Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Stand Mounting and Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Electrical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ABOUT THE EON10 G2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Available Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

QUICKSTART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

CONTROLS AND CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

VOLTAGE SELECTION AND FUSES . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

APPLICATION EXAMPLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

One Piece PA System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Basic Sound Reinforcement System With Stage Monitors . . . . . . . . . . . .12

DJ or Sound Reinforcement System with EONSUB G2 . . . . . . . . . . . . . .12

DJ System with Passive Subwoofers . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-15

REFERENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Gain Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Connections - Balanced and Unbalanced . . . . . . . . . . . . . . . . . . . . . . . . .17

Loudspeaker Placement and Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Cables and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19

JBL LIMITED WARRANTY & CONTACT INFORMATION . . . . . . . . . . . . .20

3

Contents

Welcome to the family of discer ning sound equipment users who have selected JBL Professional loud­speakers.EON is a creation of JBL, the world leader in sound reinforcement. JBL sound systems are
used in some of the world’s most famous arenas, concert halls and clubs. In fact, JBL speakers are the
premier choice for today’s hottest touring acts and artists.You just can’t make a more professional choice.
This User Guide contains important information that will help you get the most from your JBL EON loud­speakers so please take a moment to read it and be sure to keep it in a safe place for future reference.

Congratulations and thanks from all of us at JBL Professional.You have invested in the best por table per­formance system available.

PACKAGE CONTENTS

Your EON10 G2 system should include the following:

• User Guide

• 1 EON10 G2 speaker

• 1 10’(3 m) IEC Power Cable

AGENCY APPROVALS AND CERTIFICATIONS

This EON G2 System complies with all International Safety Requirements for Mains Operated
Professional audio equipment under IEC65, and Electromagnetic compatibility, Radio interference,
Emissions and Immunity requirements.

BEFORE YOU BEGIN - IMPORTANT INFORMATION

Before using your EON10 G2 speaker system please review the following for important information on
safety and protection of your investment in quality loudspeakers:

Mounting / Suspending EON Speakers

EON speakers are designed for portable applications in which the speakers will be stacked directly on the
floor, stage, speaker stands or a solid, stable platform.Optional accessory items are available from JBL
Professional and after-market suppliers to facilitate suspension and wall / ceiling mounting of EON speak­ers.Only those items recommended by JBL Professional should be used.When using these items, review
all enclosed documentation and carefully follow all instructions and safety precautions.

CAUTION:Suspension of speakers should be done by qualified persons following safe rigging standards
and practices.Unsafe mounting or overhead suspension of any heavy load can result in serious injur y and
equipment damage.

Care and Maintenance

While your EON speakers are rugged and will provide years of ser vice, some common sense care in han­dling will prevent damage and preserve appearance.

• If your speakers will be frequently moved, consider a padded carrying bag
(see AVAILABLE ACCESSORIES).

• If your EON speakers have been subjected to prolonged exposure to extreme low temperatures,
avoid subjecting them to heavy mechanical shock and warm the speakers up by playing at a low
volume for one hour before playing at loud levels.

4

Welcome

• Keep the exterior of the speaker enclosure clean. Make sure to unplug the unit before cleaning.Use a
damp rag with a general-purpose household detergent.For grease and marking tape residue,use a
damp cloth with isopropyl alcohol or mineral spirits and wipe dry.Do not use powerful solvents like acetone,
MEK, lacquer thinner or 1,1,1-Trichloro-ethane (house hold cleaning fluid).These solvents will damage
painted and co-polymer surfaces of your speakers.

• EON speakers are not intended for fixed installation in outdoor environments.Moisture can damage the
speaker cone and surround, cause corrosion of electrical contacts, and create an electrical shock
hazard.Protect your speakers from moisture.Avoid exposing the speakers to direct moisture.Any electrical
ly powered device can produce dangerous shock hazards when wet or exposed to moisture.Keep
speakers out of extended or intense direct sunlight such as that encountered in permanent, outdoor
installation.The driver suspension will prematurely dry out and finished surfaces will be degraded by long­term exposure to intense ultra-violet light.

Placement Precautions

For Stand Mounting your EON speakers include a 35mm receptacle cup to facilitate mounting on tripod
stands.When using stands, be sure to observe the following precautions:

• EON speakers include a thumbscrew that can be tightened to lock the speaker to the tripod stand.
Before mounting the speaker on the stand, be sure to loosen the screw so that it doesn’t prevent the
pole from fully penetrating the socket.

• Check the stand specification to be certain it is designed to suppor t the weight of the speaker (see
specifications).Observe all safety precautions specified by the stand manufacturer.

• Always verify that the stand is placed on a flat, level, and stable surface.

• Route cables so that performers, production crew, and audience will not trip over the cables pulling the

speaker over.

• Be sure to fully extend the legs of tripod type stands.

• Position the stand so that the legs do not present a trip hazard.

• Do not attempt to place more than one speaker on a stand designed for a single speaker.

• Always be cautious in windy, outdoor conditions.It may be necessary to place additional weight

(e.g.sandbags) on the base of the stand to improve stability.

Floor and Table T op Application

The EON10 G2 generates considerable energy.When placed on a slipper y surface such as polished wood
or linoleum, the EON10 G2 may move due to its acoustical energy output. Precautions should be taken to
ensure that the speaker does not fall off a stage or table on which it is placed. One solution is to place the
speaker on a rubber mat.

Electrical Safety

All EON products are fitted with a detachable power cord (supplied) which connects to the AC mains and
the back panel of the loudspeaker.The power cord has an IEC female connector on one end and a male
mains connector on the other end.This cord is supplied specifically to accommodate the different world­wide safety and electrical code requirements.Depending on the electrical power standards in your area,
the power cord may have a 3-pin type plug.Do not cut off or damage the grounding plug.Like any electri­cal appliance, your EON powered speakers should not be used in water or when wet.

5

Applications

• Live sound reinforcement, speech and vocals, music playback in entertainment, A/V, and institutional
venues-especially when ease of use and portability are important factors.

• Amplification, mixing, and monitoring for electronic musical instruments.

Features

The second generation of one of the most successful and influential professional speaker systems ever.

• 10”Differential Drive

®

low-frequency driver with a neodymium magnet for low-distor tion and light weight.

• 1”(throat diameter) JBL compression driver with titanium diaphragm and ferro-fluid cooling.

• Bi-amplified 125 watts low frequency and 50 watts high frequency - actual power delivered to the drivers.

• Built-in 3-input mixer.One balanced mic / line selectable input, one dual-channel TRS 1/4”phone line-level

• Balanced loop-through / mix output.“Daisy-chain” additional EON speakers or send the mixed output to a

mixing console or auxiliary EON speaker.

• 90° x 60° (nominal) constant directivity horn.

• Thermomaster

®

Total Thermal Management System®. A single piece, cast-aluminum baffle integrates the
woofer frame, hor n, and amplifier heat sink. Air movement in the finned ports dissipates heat - no inter nal
or external cooling fans ar e required.

• Rugged, lightweight, black co-polymer enclosure with an ergonomic molded in handle and cast
aluminum baffle.

• Integral 35 mm pole mount receptacle with securing thumbscrew.

• Multi-angle enclosure for front of house or stage monitor application.

Specifications

Freq.Range (-10 dB): 65 Hz - 18 kHz
Freq.Response (±3 dB): 90 Hz - 16 kHz
Horiz.Coverage (-6 dB): 90° nominal
Ver t. Coverage (-6 dB): 60° nominal
Rated Maximum SPL: 117 dB, @ 1 m (3.3 ft)
Dimensions (H x W x D): 493 mm x 356 mm x 307 mm (19.4 in x 14.0 in x 12.1 in.)
Net Weight: 10.4 kg (23 lbs.)
LF Driver: Integral frame with one 10”(254 mm) dr iver, dual neodymium magnet,

1.5”Differential-Drive

®

voice-coil.

HF Driver: JBL2412 1”(throat diameter) compression driver with titanium diaphragm.

Ferro-fluid cooled.
Amplifier Power LF: 125 watts @ low-frequency driver impedance.
Amplifier Power HF: 50 watts @ high-frequency driver impedance.
Input 1 Sensitivity: -48 dBu to 0 dBu for rated output (Mic/Line switch in MIC position)

-6 dBu to +20 dBu for rated output (Mic/Line switch in LINE position)
Input 2 & 3 Sensitivity: -12 dBu to +20 dBu for rated output
Output Level: +26 dBu (peak), Loop/Mix switch in MIX position
Audio Connectors Input 1: XLR/F, balanced
Audio Connectors Input 2 & 3: Single TRS 1/4”Phone
Crossover Freq: 2.7 kHz
Loop/Mix Out: XLR/M, balanced.
AC Input: 110 - 230 VAC, 50 - 60 Hz, 100 watts rating per UL, detachable IEC

power cable

6

About The EON10 G2

Frequency Reponse

Available Accessories

SS2-BK Tripod Stand
ESK10 Suspension Kit for EON 10”models
BRK10 Bracket, adapts EON 10” models to OmniMount

®

brackets

EON10 Bag-1 Zippered, plushed-lined speaker bag for EON 10”models

Block Diagram

7