VTX A8 BP | Base Plate
HIGHLIGHTS
• Enables ground stacking VTX A8 arrays
• Allows attaching VTX A8 cabinets to subwoofers
• Universal M20 threaded pole mount
• Array angles selectable between -15 degrees and +5
degrees
• Lightweight design
• Support for up to (8) VTX A8
SPECS
DESCRIPTION
The VTX A8 Base Plate is a universal adapter frame that enables VTX A8 arrays to be ground stacked on top of compatible subwoofers
or support structures such as stages, scaffolding, or carts. Using the included M20 screw, the VTX A8 BP connects to any supported
subwoofer equipped with a standard M20 pole mount adapter, such as the VTX B28 or the VTX B18. The base plate attaches directly
to the bottom of an A8 array, and the rear angle selection bar allows for angles ranging from -15 to +5 degrees. When not used with
subwoofers, M10 through holes at the four corners can be used to permanently attach a A8 array to other support structures. The base
plate includes one 50 mm (2 in) through hole on each side for easy use with ratchet straps. Configurations and load conditions for using
the VTX A8 BP can be obtained using JBL’s LAC-3 prediction software application. For more information about the base plate and use
cases refer to the VTX A8 Rigging Manual.
INCLUDED
• (1) VTX A8 BP Base Plate
• (4) Stabilization feet for the B18 (Part Number: 5115333)
DIMENSIONS
VTX A8 BP | Base Plate
SPECS
409 mm
(16.1 in)
727 mm (28.6 in)
TECHNICAL SPECIFICATIONS
Construction:
Finish:
Mechanical Limits
Maximum:
Safe Limit:
High-grade steel with anti-corrosion coating
Black powder coat
1
(6) VTX A8
(2) VTX A8
57 mm
(2.2 in)
Dimensions (H x W x D)2:
57 mm x 727 mm x 409 mm
(2.2 in x 28.6 in x 16.1 in)
Net Weight3:
Footnotes:
1: Always use the JBL Line Array Calculator to check mechanical safety when using the VTX A8 BP Base Plate
2: Refer to the 2D and 3D Customer Drawings for more detailed dimensions
3: Weight includes VTX A8 BP only
JBL continually engages in research related to product improvement. Some materials, production methods and design refinements are introduced into existing products without notice as a routine expression
of that philosophy. For this reason, any current JBL product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.
© 2020 Harman International Industries, Incorporated | 8500 Balboa Blvd. Northridge, CA 91329 USA | www.jblpro.com | Part Number : 51083 83-00 | Vers ion: E
12.7 kg (28 lbs)