JBL VTX A8 AF EB User Manual

VTX A8 AF EB | Extension Bar

HIGHLIGHTS

• Extension Bar for use with VTX A8 AF

• Single, front-to-back or side-by-side pick point options

• Includes (3) shackles and mounting brackets

• Compatible shackle size: 5/8 in

SPECS

DESCRIPTION

The VTX A8 AF EB extension bar was designed to operate in conjunction with the VTX A8 AF array frame to facilitate either single-point,

two-point front-to-back or side-by-side suspension methods. The extension bar is compatible with 5/8-inch shackles and can be stored

above the array frame during transportation. The extension bar can extend to the front or the rear of the frame to accommodate both

up-tilt and down-tilt aiming options. Three connection points are available for attaching the extension bar to the array frame, allowing for

precise control of shackle positioning for single-point applications. One VTX A8 AF EB extension bar is included with the purchase of an

array frame and additional extension bars can be purchased to facilitate side-by-side suspension. Conﬁgurations and load conditions

for using the VTX A8 AF EB can be obtained using the LAC-III software application. For more information about the extension bar and

use cases, refer to the VTX A8 Rigging Manual.

INCLUDED

• (1) VTX A8 AF EB Extension Bar

• (3) 5/8 in Shackles (Part Number: 5044448)

• (8) Side Tabs (Part Number: 5085088)

• (8) Pins (Part Number: 5034413)

• (8) 5/16 in Nylock Nut (Part Number: 835-36010-00)

DIMENSIONS

VTX A8 AF EB | Extension Bar

SPECS

734 mm (28.9 in)

138 mm

(5.4 in)

TECHNICAL SPECIFICATIONS

Construction:

Finish:

Compatible Shackle Size:

Mechanical Limits

Maximum: Safe Limit:

Dimensions (H x W x D)2:

Net Weight3:

High-grade steel with anti-corrosion coating

Black powder coat

5/8 inch

(24) VTX A8 | (13) VTX B18 (22) VTX A8 | (10) VTX B18

138 mm x 734 mm x 26 mm (5.4 in x 28.9 in x 1.0 in)

7.5 kg (16.5 lbs)

26 mm

(1.0 in)

Footnotes:

1: For arrays larger than the safe limit always use the JBL Line Array Calculator to determine mechanical safety 2: Refer to the 2D and 3D Customer Drawings for more detailed dimensions 3: Weight includes EB only. Shackles and other rigging parts not included

JBL continually engages in research related to product improvement. Some materials, production methods and design reﬁnements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current JBL product may differ in some respect from its published description, but will always equal or exceed the original design speciﬁcations unless otherwise stated.