JBL VTX A8 AF Product information

VTX A8 AF | Array Frame

HIGHLIGHTS

• Support for up to (24) VTX A8 enclosures

• Compatible with VTX A8 and VTX B18

• Several pick-point options

• 0.5° pick-point resolution

• Built-in storage position for extension bar

• Includes (1) VTX A8 AF EB extension bar

• Support for 3rd-party laser inclinometers

• Compatible shackle size: 5/8-inch

SPECS

DESCRIPTION

The VTX A8 AF is a lightweight array frame used for suspending VTX A8 and VTX B18 enclosures. The array frame was designed to allow

for single-point, two-point front-to-back or side-by-side suspension methods (note that side-by-side mounting requires an additional

VTX A8 AF EB extension bar). The extension bar is compatible with 5/8-inch shackles (included) and can be stored above the main

frame during storage and transportation. The extension bar can extend to the front or rear of the frame to accommodate both up-tilt and

down-tilt aiming options. Three connection points are available for attaching the extension bar to the main frame, allowing for precise

control of shackle positioning for single-point applications. Support for third-party inclinometers is available using the included laser

attachment bracket. One VTX A8 AF EB extension bar is included and additional extension bars can be purchased to facilitate side-by-

side suspension. Configurations and load conditions for using the VTX A8 AF can be obtained using the LAC-III software application.

For more information about the array frame and use cases, refer to the VTX A8 Rigging Manual.

Carrying Handle

INCLUDED

• (1) VTX A8 AF

• (1) Extension Bar

Laser Bracket

• (1) Laser Bracket (Part Number: 5095504)

• (3) 5/8-inch Shackles (Part Number: 5044448)

DIMENSIONS

VTX A8 AF | Array Frame

SPECS

734 mm

(28.9 in)

381 mm

(14.9 in)

734 mm (28.9 in)

TECHNICAL SPECIFICATIONS

Construction:

Finish:

Compatible Shackle Size:

Supported Lasers:

Mechanical Limits

Maximum:
Safe Limit:

High-grade steel with anti-corrosion coating

Black powder coat

5/8 inch

JBL VTX LZ, TEQ-SAS, Recline

1

(24) VTX A8 | (13) VTX B18
(22) VTX A8 | (10) VTX B18

227 mm

(8.9 in)

Dimensions (H x W x D)2:

227 mm x 734 mm x 734 mm
(8.9 in x 28.9 in x 28.9 in)

Net Weight3:

Footnotes:

1: For arrays larger than the safe limit always use the JBL Line Array Calculator to determine mechanical safety
2: Refer to the 2D and 3D Customer Drawings for more detailed dimensions
3: Weight includes AF and EB. Shackles and other rigging parts not included

JBL continually engages in research related to product improvement. Some materials, production methods and design refinements are introduced into existing products without notice as a routine expression of that
philosophy. For this reason, any current JBL product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.

20.2 kg (44.5 lbs)