JBL VERTEC-SYS1 Users Manual

JBL-VERTEC-SYS1 case is an innovave transport soluon

for the VerTec Subcompact Series Line Array loudspeakers
and accessories. The case system includes a rugged outer

Molded Cover with large twist latches and spring loaded li

handles, two molded caster boards with provisions for 4886
and 4883 cabinets, and a Hardware Storage Tray with
integrated Array Frame storage cradle. These components
are manufactured from highly impact-resistant and
lightweight molded linear low-density polyethylene. The

properes of molded polyethylene provide a high strength-to­weight rao that result in weight savings of more than
50% over tradional wooden ight cases. The specialized
materials and ecient, mul-funconal design of the JBL­VERTEC-SYS1 case increase ease of use and producvity,
while eliminang the weight and bulk of standard cases.

More than just a shipping case, the JBL-VERTEC-SYS1 is
purpose-built for maximum applicaon exibility with
features that adapt to mulple array conguraons.

Designed with rental companies and touring sound

professionals in mind, the JBL-VERTEC-SYS1 allows user
customizable loading conguraons to t almost any

portable sound reinforcement format, all using standard

supplied case components. The JBL-VERTEC-SYS1 adaptable

and compact footprint combines to create a new standard

plaorm for the transport and storage of VerTec

Subcompact Line Array systems.

JBL-VERTEC-SYS1

Molded Transport Case for VerTec

Subcompact Series Line Array

Features

JBL-VERTEC-SYS1 Components:
Cover, Hardware Tray
Bottom CasterBoard, Inner CasterBoard

• Truck-pack exterior dimensions in both USA
30” and European 31.5” [800mm] standards

• Interlocking caster board design enables line
array conguraon and suspension hardware

linking while on ground

• Molded foot grooves on caster board align
and securely posion speaker cabinets using

the grille bumpers on 4886 / 4883

• Molded Hardware Tray with Integrated Array
Frame Cradle provides secure storage inside
case for 4886-AF, cables, clamps, etc.

• Oponal case insert available which
accommodates two vercal stacks of four

linked 4886 boxes, plus array frame

• Heavy-duty swivel casters with reinforced
mounng plates, eld-replaceable design

• No assembly required, ready to use out of

the box

JBL-VERTEC-SYS1

Molded Transport Case for VerTec
Subcompact Series Line Array

Specications

System Components
JBL-VERTEC-SYS1

Molded Cover (4) Lifting handles, Heavy-duty large twist latches, Stacking caster dishes, Dry-erase shipping placard
Bottom Caster board 3" Swivel casters, Vibration-free strike plates and design for use as Sub Dolly
Inner Caster board 3" Swivel casters, 4886 stackable foam cushion, Vibration-free design for use as Sub Dolly
Hardware Tray Integrated Array Frame Cradle with foam cushions, (4)Lifting handles, Storage well

Optional Components

JBL-VERTEC-4886-V8 Case insert for vertical storage of 4-linked 4886 boxes (x2), plus Array Frame storage

Dimensions

Exterior Dimensions (H x W x D) 40.35" [1025mm ] x 31.50" [800mm] x 30" [762mm]
Shipping Dimensions 40.5" [1029mm] x 32.5" [825mm] x 31" [787mm]
Shipping Volume 0.66 Cubic Meters
Net Weight 104.2 lbs [47.3kg]

Recommended Loading
Conguration A (Six 4886 + AF) 3-Linked 4886 on Bottom and Inner Caster boards, Array Frame, Hardware Tray

Gross Weight Loaded: 333.2 lbs

Conguration B (Two 4883) 4883 (x2) Stack on Bottom Caster board

Gross Weight Loaded: 202 lbs

Conguration C (Three 4883) 4883 (x3) Cardioid Sub Stack on Bottom Caster board, Lid must be extended with straps

Gross Weight Loaded: 267 lbs

Conguration D (Eight 4886 + AF) 4-linked 4886 vertical stacks (x2) on optional JBL-VERTEC-4886-V8 insert, Storage for Array Frame

Gross Weight Loaded: 394.8 lbs

Product Dimensions in Inches [mm] Example of JBL-VERTEC-SYS1 Casterboards

Used for Rigging Suspension Array

921

36.25

1025

40.35

C

800

31.50

A

4886 (x6) + AF

B

4883 (x2)

4883 (x3)

D

4886 (x8) + AF

762

30.00