LeWing JBL1
Room surface : up to 30 m2
Number of speakers : 3 (LCR)
Power Handling : 100 Watts
(with 80Hz cut-off)
Nominal Impedance : 8 Ohms
Sensitivity : 91dB
Frequency Response : (±3dB)
55Hz – 40kHz
Ultrahigh-Frequency Driver
3/4’’ (19mm) Mylar® dome, castaluminum chassis, mounted in a
Bi-Radial® horn.
High-Frequency Transducer
1’’ (25mm) Pure titanium dome
in JBL EOS™ waveguide,
cast-aluminum chassis
Low-Frequency Transducer
Dual 5-1/4’’ (130mm) PolyPlas™
cones with rubber surrounds,
cast-aluminum chassis,
HeatScape™ motor structures,
Symmetrical Field Geometry™
(SFG™), oversized Kapton®
voice coils, magnetic shorting
rings.
Magnetically Shielded : Yes
Recommended Sub-Woofer :
L8400P, ES250P, ES150P,
HTi88 (IW)
Recommended Surround :
SP5 II (IW), SP6II (IC),
P52 (OW)
LeWing JBL2
Room surface : up to 45 m2
Number of speakers : 3 (LCR)
Power Handling : 150 Watts
(with 80Hz cut-off)
Nominal Impedance : 8 Ohms
Sensitivity : 92dB
Frequency Response : (±3dB)
50Hz – 22kHz
High-Frequency Transducer
1’’ (25mm) Pure titanium dome
in JBL EOS™ waveguide,
cast-aluminum chassis
Midrange Transducer
4’’ (100mm) PolyPlas™ cone
with rubber surround,
cast-aluminum chassis,
HeatScape™ motor structure
Low-Frequency Transducer
Dual 6’’ (150mm)
PolyPlas™cones with rubber
surrounds, cast-aluminum
chassis, HeatScape™ motor
structures, Symmetrical Field
Geometry™, oversized Kapton® voice coils, magnetic
shorting rings
Magnetically Shielded : Yes
Recommended Sub-Woofer :
PS1400, L8400P, HTi88 (IW)
Recommended Surround :
SP8C II (IC), SP8 II (IW),
P52 (OW)
LeWing JBL3
Room surface : up to 65 m2
Number of speakers : 3 (LCR)
Power Handling : 200 Watts
(with 80Hz cut-off)
Nominal Impedance : 6 Ohms
Sensitivity : 89dB
Frequency Response : (±3dB)
48Hz - 40kHz
Ultra-High Frequency Driver
045Ti 1’’ Pure-titanium compression driver with aluminum
edge-wound voice coil and
2’’ (51mm) neodymium motor
assembly
High-Frequency Driver
175ND-3 1.75’’ compression
driver w/Bi-Radial® horn
compression driver
Mid-Bass Driver
Dual 6-1/2’’ cones, shielded,
Symmetrical Field Geometry™
(SFG), Symmetrical Inductance
Modulation (SIM) and Vented
Gap Cooling™ (VGC).
Recommended Sub-Woofer :
1500 Array, PS 1400, S2S, S4S
(IW)
Recommended Surround :
S4Ai (IW), P81 (IC), P52 (OW)
LeWing JBL4
Room surface : up to 100 m2
Number of speakers : 3 (LCR)
Power Handling : 300 Watts
(with 80Hz cut-off)
Nominal Impedance : 8 Ohms
Sensitivity : 90dB
Frequency Response (±3dB)
70Hz – 40kHz
Ultra-High Frequency Driver
045Ti 1’’ Pure-titanium
compression driver with
aluminum edge-wound voice
coil and 2’’ neodymium motor
assembly.
High-Frequency Transducer
435AL-1 3’’ Aquaplas-treated
aluminum-dome compression
driver with aluminum edgewound voice coil and
neodymium motor assembly,
mounted in a vertical
SonoGlass™ constant
directivity horn.
Low-Frequency Transducer
Dual Array 8C 8’’ polymer
treated pulp-cone driver with
rubber surround and massive
ferrite motor assembly with 4’’
copper edge-wound voice coil.
Recommended Sub-Woofer :
1500 Array, S1S-EX, S2S, S4S
(IW)
Recommended Surround :
S4Ai (IW), P941 (IC)
LeWing™ JBL Speaker Specifications