JBL PRX418S Technical Manual
JBL Incorporated, 8500 Balboa Boulevard, P.O.Box 2200, Northridge, California 91329 U.S.A.
JBL PRX418S REV B
PACKAGE
WIRING DIAGRAM
07-12
Technical Manual
JBL PRX418S
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance: 8 Ohms
• System Power Rating,
Pink Noise: 800W / 1600W / 3200W, 2hrs
(Continuous/Program/Peak)
• Frequency Response (±3 dB): 52 Hz – 120 Hz
• Frequency Range (–10 dB): 35 Hz – 250 Hz
• Maximum SPL: 124 dB SPL continuous (130 dB SPL
peak
• System Sensitivity: 95 dB SPL, 100 dB SPL
1 watt @ 1 meter
• Crossover Frequency: 80 Hz 24 - 48 dB / octave
35 Hz 24 dB / octave subsonic high
pass
SYSTEM COMPONENTS:
• Cabinet: Enclosure (Not For Sale)
• Grille: 444737-002
• Low Frequency Selenium 18SWS1000 457 mm (18 in)
Transducer: woofer
• D.C. Resistance: 5.8 ohm
• Input Cup Assembly: 5011409
AURAL SWEEP TEST SPECIFICATIONS:
A. System. Aural Sweep Test: 7V Input, 30 Hz to 300 Hz
B. L.F. Aural Sweep Test: 7V Input, 30 Hz to 300 Hz (?)
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions: 678 x 536 x 615 mm D
(H x W x D) (26.7 x 21.1 x 24.2 in.D)
• Net Weight: 79 lb (36 kg.)
WARRANTY INFORMATION:
• Refer to Warranty Statement packed with each product.
Manual
5011443
Carton
5011444
Filler (2)
5014462
PKG, Microfoam (8)
49790P
Warranty Card 59660
NOTE: INDIVIDUAL PARTS FOR THE ABOVE CROSSOVER ARE NOT AVAILABLE.
A COMPLETE REPLACEMENT ASSEMBLY SHOULD BE ORDERED.
Input Cup
Assembly
5011409
Driver, Low Freq.
18SWS1000
(75026145)
Cone Repl
76003092
Input Cup Assembly Schematic - 5011409
GRN
BLK
Neutrik Connector (2)
NLJ2MD-V
JBL PRX418S
JBL PRX418S
COMPONENT EXPLODED VIEW
Grille Badge
Assembly
5006459
Logo Nut (2)
444829-001
Grille Assembly
444737-002
Screw (4)
444811-001
Low Profile
Screw (10)
882-51110-12
6 x 3/4
OV,PH,PTCL,
BLK, ZINC, LCS
Gasket
364808-001
Pole Cup
Pole Mount
5003856
Screw (3)
806-11010-20
1/4 - 20 x 1 1/4
FLT,PH,UNC,
BLK,ZINC,LCS
Input Cup Assembly
5011409
Screw (6)
882-51110-10
6 x 5/8
OV,PH,PTCL,BLK
ZINC,LCS
Kurly-Lok
925-00005-01
Input Cup
5011410
Label
5012374
Handle Cup (2)
444686-001
Gasket (2)
444827-001
Handle
Screw (8)
864-41400-08
#8 10 x 1/2
HILO,PAN,PH,CLR,
ZINC
Handle Bar (2)
Assembly
364855-003
Screw (8)
815-73414-15
M5x0.8x15mm
SOCKHD,HEXSOCK,
BLK
Foot (4)
353445-001
Screw (4)
884-41110-12
10 x 3/4
PAN,PH,PB,BLK
ZINC,LCS
Driver, Low Freq.
18SWS1000
(75026145)
Cone Repl
76003092
Gasket (4)
60578
Screw (8)
806-63110-16
1/4-20 x 1
HEX,PH,UNC,BLK
ZINC,LCS
Grille Support (2)
444735-001
T-Nut (4)
61861
10-32
T-Nut (8)
804-90003-00
1/4-20
Short
(Baffle)
T-Nut (3)
804-90003-00
1/4-20
Short
(Top Panel)
Enclosure Assembly
PRX418S
(Not Available for Sale)
Loading...