Page 1
Project ArrayTM – 1000 Array
Key Specifications
Description: Three-way, 250mm (10") floorstanding speaker
Frequency response: 35Hz – 40kHz
Crossover frequencies: 900Hz /8kHz
Power handling: 200 Watts
Sensitivity (2.83V@1m): 8 9dB
Nominal impedance: 8 Ohms
Dimensions (H x W x D): 1105mm x 311mm x 432mm
(43-1/2" x 12-1/4" x 17" )
Weight: 32kg (70 lb)
Highlights
Aluminum compression driver
Titanium tweeter
Classic JBL professional
bass drivers
Unique enclosure
Seamless system integration
High-performance loudspeaker
To deliver extraordinary sonic performance in the finest home theater and music systems, JBL® Project ArrayTM models utilize
technologies directly derived from the company’s flagship K 2
®
Series loudspeakers and professional recording studio monitors.
Project Array models include the 1400 Array, 1000 Array and 800 Array floorstanding loudspeakers; the 880 Array center chan
nel loudspeaker; and the 1500 Array powered subwoofer with built-in 1000-watt amplifier. The 1000 Array is a more-modestly
propor tioned loudspeaker that is ideal for medium- and smaller-sized home theater and music systems. This model utilizes a
vertically oriented, enclosure-less Bi-Radial
®
-horn configuration to provide spacious, dynamic and natural sound
qualit y.
Page 2
Features
Three-way floor standing design featuring:
A 250mm (10" ) polymer-treated pulp-cone low-frequency driver with 38mm (1-1/2") copper edge-wound voice coil.
A 045Ti 2 5mm (1") pure-titanium ultrahigh-frequency compression driver.
A 175Nd-3 44mm (1-3/4") Aquaplas-treated aluminum-dome high-frequency compression driver.
Utilizes a ver tically oriented, enclosure-less Bi-Radial-horn configuration to provide spacious, dynamic and
natural sound quality.
Incorporates a high-per formance JBL 175Nd high-frequency compression driver with an edge-wound aluminum voice coil,
neodymium motor assembly and Aquaplas-treated aluminum dome, mated to a rapid-flare phase plug and the Bi-Radial-horn
assembly.
015M transducer that features a 22mm (0.88") Mylar® diaphragm, directly mounted to the top of the Bi-Radial horn. To
achieve tight, musically natural bass response, the 10 00 Array employs a 250mm (10 ") polymer-treated pulp-cone woofer.
Built to the same uncompromising quality and construction standards as every Project Array model, the 1000 Array is
equally adept at movie soundtrack and music reproduction, with a smooth tonal balance; transparent, musically inviting
midrange; and open, ex tended high frequencies.
Project ArrayTM – 1000 Array
High-performance loudspeaker
Harman Consumer Group, Inc.
2, route de Tours, 72500 Château du Loir, France • 250 Crossways Park Drive, Woodbury, NY 11797, USA • 8500 Balboa Boulevard, Northridge, CA 91329, USA
www.jbl.com
© 2007 Harman International Industries, Incorporated. All rights reserved. JBL, Bi-Radial and K2 are trademarks of Harman International Industries,
Incorporated, registered in the United States and/or other countries. Project Array is a trademark of Harman International Industries, Incorporated.
Mylar is a registered trademark of E.I. du Pont de Nemours and Company.
Features, specifications and appearance are subject to change without notice.
Loading...