FFiinnaall ll yy..
Take a “test drive” with some favorite music.
11
With the receiver/amplifier still turned off,
confirm that its volume control is turned all the
way down. Next, center the balance control. If
the receiver/amplifier has an A/B speaker switch,
set it to correspond to the speaker terminals
connected to the Music10 system.
22
Now, turn on your receiver/amplifier and
select a music source such as a CD player,
cassette deck or FM tuner.
33
Turn up the volume control gently until you
hear sound from the speakers.
44
Rotate the balance control all the way to the
left. Sound should come only from the left
speaker. If the sound comes from the right
speaker with the balance control to the left, the
speaker wires have been reversed during hookup. Turn the receiver/amplifier “off” and switch
both sets of speaker wires.
Troubleshooting.
NNoo ssoouu nndd aatt aallll ff rroo mm aann yy oo ff tthh ee ss ppeeaa kkeerr ss..
• The tape monitor button on your receiver/
amplifier may be pushed in, preventing use of
the CD player, FM tuner or other input. Check
button position.
• If your receiver/amplifier has both “A” and “B”
sets of speaker outputs, the wrong set of
speakers may be selected. Select the other set
or switch the wires to the preferred set.
• The sound source (CD player, cassette deck,
etc.) may not be turned “on,” not activated, or
not selected on front panel of the receiver/
amplifier. Check settings.
NNoo ss oouu nn dd ffrr oo mm tt hh ee llee ff tt ssppeeaakkeerr oorr nnoo ssoouu nndd
ffrr oomm tt hhee rriigg hh tt sspp ee aa kkee rr..
• The balance control may be turned all the way
to the left or right. Check balance.
• One of the connections between the sound
source and the receiver/ amplifier is faulty or
has become disconnected. Check connections.
• Speaker wire to these speakers has become
disconnected at the speaker, or the receiver/
amplifier. Check connections.
SS pp ee aa kk ee rrss pp ll aa yy aa tt lloo ww vvoo ll uu mmeess bb uutt ss hh uutt oo ffff aa ss
vv oolluu mmee ii ss ii nncc rreeaass eedd oorr ss oouu nn dd ii ss ii nntt eerrmm ii tt ttee nntt ..
• There may be a short circuit in one of the
connections. Check all connections.
BB aa ssss iiss vv ee rryy wwee aa kk..
• The polarity (+ and –) of one speaker is
reversed. Check connections.
• Subwoofer is not connected. Check
connections.
SoundEffects products were made for
each other. No matter what SoundEffects
components you start with, it’s easy to
add complementary products that will
increase the performance and value of
your home audio system. SoundEffects
MMoovviieess1100
will help you get even more
value from your
MMuu ssiicc1100
system. For
information about these and other
SoundEffects products, visit your JBL
dealer or, in the USA call
880000--333366--44JJBBLL..
For more ideas about uses for these and other
SoundEffects products in your home, see the
SoundEffects brochure. Need an additional
copy? Call JBL.