JBL MTC-CBT-FM3, MTC-CBT-FM2, MTC-CBT-FM1 User Manual
Flush-Mount
Flush-Mount Wall Brackets
for CBT Speakers
Dimensional Diagrams
Wall Brackets
MTC-CBT-FM1/FM2/FM3
for CBT Speakers
Professional Series
Key Features:
u
Provides Low-Prole, Close-to-Wall
Mounting Brackets for JBL CBT Line
Array Column Speakers
u
Drop-In Ease of Assembly with Set
Screw(s) for Secure Installation
u
ROHS-Compliant Zinc Plating for
Weather Resistance
u
For Mounting Speaker in Typical
Vertical Orientation (not for Horizontal
Orientation)
u
Use one or two for a single cabinet. Use
one on each cabinet for 2 cabinet arrays.
u
Available in Black or White (-WH)
MTC-CBT-FM1
u
For Use with CBT 50LA-1, CBT 100LA-1
and CBT200LA-1.
u
Loudspeaker-Mount Section of bracket
attaches to the included insert points on
the back panel of the speaker (using the
M6x15 mm bolts, at washers & lock
washers that come with the speaker).
Mounting points are at 107.6 mm x
50.8 mm (4-1/4 x 2 inch) spacing.
u
Wall-Mount Section has 3 aligned holes
vertically; 3 aligned holes horizontally.
u
Loudspeaker-Mount Section drops
easily into Wall-Mount Section. Set
screw holds securely.
u
2.25 mm thick (13-Gauge AWG) Metal
u
Bracket assembly spaces back of speaker
within 16 mm (0.62 inches) of wall (typical).
MTC-CBT-FM2 and
MTC-CBT-FM3
u
FM2 is for use with CBT 70J-1 and
CBT 70J-1/70JE-1 array.
u
FM3 is for use with CBT1000 and
CBT1000+1000E array.
u
Loudspeaker-Mount Section of bracket
attaches to the included insert points on
the back panel of the speaker (using
the M6x15 mm bolts on FM2, and
M8x20 mm bolts for FM3 at washers &
lock washers that come with the speaker).
Mounting points are at 254 mm x 70 mm
(10 x 2-3/4 inch) spacing.
u
Wall-Mount Section has 3 aligned holes
vertically; 3 aligned holes horizontally.
u
Loudspeaker-Mount Section drops
easily into Wall-Mount Section. Set
screw holds securely.
u
3.5 mm thick (10-Gauge AWG) Metal
u
Bracket assembly spaces back of speaker
within 20 mm (0.77 inches) of wall (typical).
Dimensional Diagrams
5.60
[143]
4.25
[108]
11.4
[290]
10
[254]
0.25
[6.4]
(x4)
FM2
0.25
[6.4]
(x4)
MTC-CBT-FM1 BRACKET DIMENSIONS
2.70
[69]
6.25
[159]
2.00
[51]
Loudspeaker-Mount
Section
MTC-CBT-FM2 AND FM3 BRACKET DIMENSIONS
4.6
[117]
11.4
[290]
FM3
0.33
[8.4]
(x4)
2.75
[70]
Loudspeaker-Mount
Section
0.62
[16]
Assembled Bracket
0.77
[20]
1.2
[31]
0.25
[6.4]
(x5)
3.50
[89]
2.0
[51]
1.0
[25.4]
1.92
[49]
1.92
[49]
Wall-Mount
Section
5.3
[134]
3.0
0.25
[6.4]
(x5)
3.5
[89]
3.5
[89]
[76]
Section
1.5
[38]
Dimensions in mm [inches]
5.0
[127]
2.5
[64]
7.9
[201]
3.95
[100]
tnuoM-llaWtekcarB delbmessA
u
MTC-CBT-FM1/FM2 Flush-Mount Wall Brackets for CBT Speakers
Assembly
MTC-CBT-FM1/FM2/FM3 Flush-Mount Wall Brackets for CBT Speakers
Assembly
3) Slide Loudspeaker-Mount Section down
Into Wall-Mount Section. Make sure the two are
fully engaged.
1) Attach Loudspeaker-Mount Section
to the insert points on back of speaker
using M6 x 15mm bolts (or M8 x 20mm
bolts for FM3), flat washers & lock
washers, included with the speaker.
Do not install over terminal cup.
2) Secure Wall-Mount Section
Mounted onto Wall.
4) Secure with included
set screw through
threaded hole in
side of wall bracket.
IMPORTANT: Brackets MUST be installed by qualified personnel in
accordance with safe installation practices.
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
© Copyright 2017 JBL Professional
www.jblpro.com
SS CBT-FM
CRP
01/17
Loading...