Jbl MTC-2P User Manual

MTC2.instructions.111313_Layout 1 11/13/13 11:36 AM Page 1

MTC-2P Mounting Brackets

CONTROL 2P

Compact Powered Reference Monitors

MTC-2P Mounting Brackets included in the MTC-2P Mounting Kit are designed to allow safe mounting of Control 2P Compact

Powered Reference Monitors and the outboard power supply to a suitable mounting surface.

Francais, Deutsch, Espanol, information at www.jblpro.com

The MTC-2P Mounting Kit contains the following items:

2 MOUNTING BRACKET ASSEMBLIES 1 POWER SUPPLY HOLDER 1 WRENCH

Safety Cable not included)

(

To mount a Control 2P speaker and the power supply follow these instructions:

A. Screw the metal rod/ball assembly (1) into the threaded insert (2 ) on the

back of the cabinet (8) until it is seated against the bottom of the insert.

for use with

B. Next, tighten the “knurled” nut ( 3 ) with a small wrench

(9) until it is seated against the back of the cabinet. Tighten the nut until it has “locked” the rod/ball assembly (1) to the cabinet. Note: the nut may leave marks on the back of the cabinet where the attachment is made however, the flange of the nut will cover these marks.

C: Mount the wall bracket plate (4) onto a flat sturdy surface using the

appropriate mounting hardware for the surface. A safety cable (5) (not included) may be attached to the wall bracket via its eyelet ( 6) at one of the two lower screw mounting points or to a secondary point off the mounting plate.

D. Next, slip the large molded nut (7) over the ball on the metal rod/ball assembly ( 1 ).

E. Holding the cabinet (8 ) with both hands, insert the ball on the metal rod/ball assembly (1) into the cup of the wall plate (4).

F. Orient the speaker into the desired position and hand tighten the molded nut ( 7). Once the orientation is finalized,

use the metal bar (9) in one of the holes on the molded nut (7) to securely tighten.

NOTE: Over tightening can damage the nut. Tighten using the supplied bar and hand-force only. Use of additional tools

such as pliers to tighten the nut will void the warranty.

G. Clip the safety cable to the cabinet's safety bar ( 10 ) on the back of the cabinet.

H. Mount the power supply holder onto a flat sturdy surface using the appropriate

mounting hardware for the surface. The holder should be oriented horizontally or vertically with the spring clip ( 11) on top. Choose a location in proximity to a power out let so the power cable will reach the outlet.

Power Supply Holder

I. Insert the power supply as far as it will go into the holder until

the retaining clip ( 11) prevents removal of the power supply.

Control 2P Power Supply

J. Connect the power cable to the power outlet.

*NOTE: When MTC-2P Brackets are installed in mobile vehicles, vibration and sudden movement may cause a shift in position, requiring re-adjustment.

*CAUTION: Unsafe mounting or overhead suspension can result in serious injury and equipment damage. Mounting of speakers should be done by qualified personsin accordance with all applicable local safety and

construction standards. Be certain to follow the instructions provided by the manufacturer of the mounting bracket. Before selecting a mounting bracket, be certain it is capable of supporting the weight of the speaker.

JBL Professional Contact Information Mailing Address:

JBL Professional 8500 Balboa Blvd. Northridge, CA 91329

Shipping Address:

JBL Professional 8370 Balboa Blvd., Dock D Northridge, CA 91329

Customer Service:

Monday through Friday | 8:00am - 5:00pm Pacific Coast Time in the USA (800) 8JBLPRO (800.852.5776) www.jblproservice.com

On the World Wide Web:

www.jblpro.com

P/N 4409747-001 0608 REV A

Outside the USA: Contact the JBL Professional Distributor in your area. A complete list of JBL Professional international distributors is provided at our U.S.A.website -www.jblpro.com

En Dehors des Etats-Unis: Contacter votre Distributeur JBL Professional. Une liste c omplète de nos distributeurs internationaux est disponible sur le site web www.jblpro.com International: Wenden Sie sich an Ihre örtliche JBL Professional Vertretung. Eine vollständige Liste der internationalen JBL-Vertretungen fi nden Sie auf userem Website

unter www.jblpro.com Fuera de los Estados Unidos: Comuníquese con el distribuidor de JBL Professional de su zona. En nuestro sitio web, www.jblpro.com, encontrará una lista completa de los

distribuidores de JBL International.

8500 Balboa Boulevard

Northridge, CA 91329 USA

Visit us online at www.jblpro.com