JBL ES150P User Manual

JBL ES Series Speaker Systems
ES150P
High-definition audio with professional credentials
The JBL ered subwoofers. With innovative technologies derived directly from JBL Professional equipment, the JBL ES Series delivers powerful, accurate audio performance and brings the legendary JBL sound from concert stages, recording studios and movie theatres to living rooms, dens, bedrooms and patios. And with three finishes to choose from – black, beech and cherry – they’re designed to look good anywhere, with a st yle that equals their substance.
Highlights
®
ES Series offers a variety of bookshelf, wall-mount and floorstanding loudspeakers, and bring-down-the-house pow-
Key Specifications
250mm (10") Front firing
powered subwoofer
300 Watts RMS high-output,
high-efficiency amplifier
Elegant Cabinet design with its
slender profile and combination of wood-like vinyl with textured high-qualit y charcoal vinyl
Finishes: Cherry, Beech and Black
250mm (10") PolyPlasTM-cone driver
300 Watts RMS high-output, high-efficiency amplifier for thunderous deep-bass
extension without breakup or distortion, even at high listening levels
Switchable LFE input
Phase switch allows subwoofer to operate with normal or reverse polarity.
Subwoofer level control to conveniently adjust the relative volume level of low
frequencies.
Top-mounted LED conveniently indicates status of unit
High-qualit y construction cabinet increases enclosures’ structural rigidit y
Tuned-port bass enclosure ex tends low-frequency response and increases
overall efficiency of the bass driver, reducing distortion and improving its power-handling capacity
JBL ES Series Speaker Systems
ES150P
Specifications
Frequency response: 27Hz – 150Hz
Amplifier RMS power: 300W
Amplifier peak dynamic power*: 50 0W
Crossover frequency: 50Hz – 150Hz; 24dB/octave, continuously variable
Driver: 250mm (10") PolyPlas
Dimensions with grille (H x W x D): 457mm x 337mm x 3 87mm (18" x 13-1/4" x 15-1/4")
Weight per speaker: 17.7kg (39 lb)
* The Peak Dynamic Power is measured by recording the highest center-to-peak voltage measuredacross the output of a resis tive load equal
to minimum impedance of thetransducer, using a 50Hz sine wave burs t, 3 cycles on, 17 cycles off.
Harman Consumer Group, Inc. 2, route de Tours, 72500 Château du Loir, France • 250 Crossways Park Drive, Woodbury, NY 11797, USA • 8500 Balboa Boulevard, Northridge, CA 91329, USA
www.jbl.com
© 2007 Harman International Industries, Incorporated. All rights reserved. JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. PolyPlas is a trademark of Harman International Industries, Incorporated. Features, specifications and appearance are subject to change without notice.
Loading...