English
Français
Español
Deutsch
Italian
Document Number: 950-0045-001 Description: MANUAL, CREATURE, ENGLISH
Revision : A
Harman Multimedia Confidential
Page 1 of
6
Safety Instructions
p
Please read the following operation precautions before use
Read instructions ---All the safety and operating instructions should be read thoroughly before attempting to operate this audio
•
system.
• Retain instructions for future reference.
• Heed warnings --- All warnings on this audio system and in the operating instructions should be adhered to.
Follow instructions --- All operating and use instructions should be followed.
•
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE A RE NO USER
•
SERVICEABLE PARTS INSI DE THI S UNIT, PLEASE REFER SERVICING TO QUALIFIED HARMAN MULTIMEDIA
CORPORATION SERVICE PERSONNEL.
Do not expose the speakers to liquid or solvent.
•
Never remove grille covers in order to service the speaker system. The speaker system does not contain any user serviceable
•
parts. Refer all servicing to the Harman Multimedia Technical Support Group.
• Do not expose the speaker system to temperature or humidity extremes, direct sunlight, excessive dust, or vibrations.
• Place the speaker system on a stable, level surface. Do not drop, apply excessive force to the controls, or put heavy objects on
top of the speaker.
If cleaning is required, use a soft dr y c loth. If necessary , use a damp cloth wit hout any solvents.
•
• In order to protect the speaker system, avoid microphone feedback, continuous output from electronic musical ins trument s, or
distorted output from any signal source.
Do not place the speakers close to fluorescent light sources, or neon light fixtures.
•
Although the speakers are magnetically shielded, keep magnetic storage media (disks and tapes) at least four inches from the
•
speaker system in order to avoid data loss.
• WARNING: To reduce the risk of fire or electric shock, do not ex
:
ose this speaker system to rain or moisture.
Introduction
The Creature is the latest innovation from JBL, a long time leader in the manufacture of high-end component and computer audio systems.
JBL’s audio heritage combined with continual research has provided the unique technologies included in the Creature.
The Harman Multimedia Odyssey Plus transducer is a unique full range transducer designed specifically for extremely small speaker
enclosures while providing significant mid bass. In addition to the bass, the small, rigid and light inverted aluminum cone provides performance
that will rival any tweeter used in multimedia speakers today. The result is a small and elegant satellite speaker that perfectly integrates with
the subwoofer while providing superior midrange and highs.
The Magnum series subwoofer transducer provides deep bass. This Magnum series of subwoofers are designed specifically to match with the
Harman Multimedia Odyssey Plus transducers. The same approach of providing solid bass from a small enclosure guided the development of
these Magnum transducers.
As described in the Using the speaker system section of the user’s guide, the bottom left and right corners of the control/right speaker feature
- and + buttons. Briefly touching the appropriate button will cause a small step increase or decrease in the system volume. Touching the
appropriate button for more than 0.5 seconds will cause the volume to increase or decrease rapidly while that button is touched.
Treble, Bass level adjust knobs are located on front of the subwoofer unit. A system on/off switch is also provided on the rear of the subwoofer
unit. The system includes two desktop speakers and a subwoofer that can be placed either on the floor or on your desk. Both satellite
speakers and the subwoofer are magnetically shielded to provide the greatest protection against computer monitor image distortion.
Setup
Carefully unpack your speaker system and identify all components:
A Control/Right Satellite speaker
•
• B Auxiliary/Left Satellite speaker
• C Subwoofer
• D Power Supply
• E Audio input cable
Connect the speaker system as shown in the Connecting the speaker system to sound card illustrations. Once the speaker
system is properly connected, turn on the power switch located on the rear of the subwoofer.
Document Number: 950-0045-001 Description: MANUAL, CREATURE, ENGLISH
Revision : A
Harman Multimedia Confidential
Page 2 of
6
Step 1 Connecting the speaker system to the computer:
• If you have an integrated sound solution or a stereo sound card; connect the gree n connect or from the subwoofer into
the green jack on the computer.
• If you have a multi-channel sound card; connect the green connector from the subwoofer into the green jack on the
computer.
•
If you have a portable computer; connect the green connector from the subwoofer into the headpho ne jack on the
Step 2 Plug the orange connector fro m the right/ control sat ellite into the oran ge jack on the subwoofer.
Step 3 Plug the brown connector fro m th e lef t satellite into the brown jack on the sub woofer.
Step 4 Plug the AC power supply jack into the subwoofer.
Step 5 Plug the AC plug into the wall outlet.
Step 6 Turn on the speaker set an d adj u st the volume accordingly .
computer.
Placement of speakers
The speakers are magneticall y shielded and can be placed close to a computer monitor withou t disto rting the image. For
optimal stereo imaging, separate the speakers from each other by a distance equal to your dis tance from the speakers.
The subwoofer’s sound is non-directional ; ther efo re, it does not have to be placed in any particular rela ti onshi p t o the satellites.
The subwoofer is magnetically shiel ded and can be placed on the desktop, if desired. If the subwo ofer is placed too close to a
computer monitor it can cause vibration on the monitor screen.
Document Number: 950-0045-001 Description: MANUAL, CREATURE, ENGLISH
Revision : A
Harman Multimedia Confidential
Page 3 of
6
Using the speaker system
On/Off Switch
An on/off switch is located on the rear of the sub woofer.
There is a green LED located on bottom of each of the two satellite speakers. There is also a green LED located on the
bottom-back of the subwoofer. All three LEDs should illuminate when the system is connected correctly and receiving
power. Turn the speaker off if it will not be used for a long period.
Volume Control
The volume control can be found on the front of the control/right satellite speaker.
Touching the right + button on the front of this speaker will turn up the volume setting in increments of 2.0 dB per step. If
the button is continuo u sly touched, after 0.5 seconds the volume level will con stan tly increase at a rate of 5 dB per sec ond.
Touching the left - button on the front of the right speaker will turn down the volume setting in increments of 2.0 dB per
step. If the button is continuously touched, after 0.5 seconds the volume level will consta ntly decrease at a rate of 5 dB per
second until the system is muted.
The JBL CREATURE will retain the volume setting when it is turned off so that when the speaker system is turned back on,
it will restore the last volume setting.
Muting
Touching the left and right buttons simultaneously on the front of the right speaker will mute the audio. Power will remain
on (both speakers’ LED’s remain illuminated). When mute d , touching either the left butt o n or th e r ig ht button, or both
buttons simultaneously will restore vo lume to the le ve l prior to the activation of the mute function.
Controls on the Subw oofer
Bass - Turn the knob marked Bass clockwise to increase the subwoofer level or coun te rclockwise to decrease the subwoofer
level.
Treble – Turn the knob marked Treble clockwise to increase the treble level or counterclockwise to decrease the treble level.
Document Number: 950-0045-001 Description: MANUAL, CREATURE, ENGLISH
Revision : A
Harman Multimedia Confidential
Page 4 of
6
Troubleshooting
SYMPTOM
No sound from Speakers
Distortion (static, crackling
or hissing sounds)
Too much bass or treble. Bass/Treble level is set too
Subwoofer emits a loud
hum or buzzing noise.
Speaker system
experiences radio
frequency interference or
picks up a radio station
POSSIBLE PROBLEM
No power to unit. Make sure wall power
Is the control/right satellite of
your Creature plugged in
correctly?
Noise may be caused by
interferen ce from the
monitor.
Speaker is being overdriven
by an amplified audio
source.
Volume level on sound card
may be too high.
Sound card or audio source
material may be cause of
problem.
Check the speaker control
settings.
high
Input cables not plugged i n
properly
Input cable may be picking
up interference
SOLUTION
outlet or power strip has
power. Make sure all
switches for outlet/power
strip ar e on and that all
switches for speaker
system are on.
Ensure that the control
speaker conne ct or is
pushed in properly.
Remove the control /right
speaker conne ct or from
the subwoofer, then reconnect this cable
ensuring that the
connector is pushed in
properly.
Turn monitor off to see if
noise is eliminated. Move
speaker cable s fa rthe r
away from monitor.
Ensure tha t sp e aker is
connected to the
appropriate receptacle.
Check color-coding on
connectors when making
connections. Make sure
that all signal cables are
inserted snugly into
receptacles.
Check volume of sound
card via Windows Volume
Control.
Check speakers with
another audio source.
Set each of the two knobs
(treble, bass level) on front
of the subwoofer back the
their center /nominal
positions.
Turn Bass/Treble down or
return their settings to the
center position.
Check input cable
connection
Wrap up excess input
cable in order to make as
short as possible
Purchase a ferrite clamp
and attach over input
cable. A clamp can be
purchased at your local
electronics store
NOTE
Check green power LED on
the sub. Are the LED’s on?
If the sub’s led is not on,
power is not getting to your
speaker system. Try the
solutions shown.
There is an LED located in
the bottom of each of the
two satellite speakers.
These should both be lit. If
they are, your speakers are
both plugged in correctly.
Disconnect sp e aker input
cable (green connector)
from sound card and plug
into CD ROM headphone
jack. If static is eliminated,
troubleshoot the soundcard.
Document Number: 950-0045-001 Description: MANUAL, CREATURE, ENGLISH
Revision : A
Harman Multimedia Confidential
Page 5 of
6
SPECIFICATIONS
Manufacturer Harman International
Model Creature
Drivers (satellite) Odyssey Plus
Drivers (subwoofer) One 4. 5 inch Magnum woofer
Power (satellite) 9 watts per satellite at 10% THD
Power (subwoofer) 27 watts at 10% THD
Crossover Frequency (subwoofer) 180 Hz
Dimensions
Width:
Satellite 3.0 inches
Subwoofer 9.0 inches
Depth:
Satellite 3.0 inches
Subwoofer 9.0 inches
Height:
Satellite 3.0 inches
Subwoofer 10 inches
Input Impedance 5-10kOhm
Signal-to-Noise ratio >70dB
Frequency Response 35 – 20 kHz
Input Sensitivity 300-400 mV rms for rated power output
USA/Canada Power 120 volts, 60Hz AC
Maximum Power Consumption 120 watts
UL/CUL/CE Approved
Regulatory
FCC Stat ement an d Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
a) Re-orient or relocate the receiving antenna.
b) Increase the separation between the equipment and receiver.
c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
d) Consult the dealer or an experienced radio/TV technician for help.
MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT
UNDER FCC RULES.
Document Number: 950-0045-001 Description: MANUAL, CREATURE, ENGLISH
Revision : A
Harman Multimedia Confidential
Page 6 of
6
Loading...