Page 1
JBL Incorporated, 8500 Balboa Boulevard, P.O.Box 2200, Northridge, California 91329 U.S.A.
JBL CONTROLCRV/WH REV A
PACKAGE
10-09
Technical Manual
JBL CONTR OL CRV/WH
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance: 4 Ohms
• Minimum Impedance: 4.0 Ohms @ 320 Hz
• Power Handling: 75W Continuous Pink Noise, 2 hrs
60W Continuous Pink Noise,100 hrs
150W Continuous Program Power
300W Continuous Peak Power
• Frequency Range: 80 Hz - 20 kHz (–10 dB) (half-space,
on wall)
60 Hz - 20 kHz quarter space, at twowall junctions
• Nominal Sensitivity: 89 dB
• Maximum SPL @1m: 108 dB continuous average long-term
(peaks of 114 dB)
• Crossover Frequency
and Type: 2 kHz - 36 dB/octave tweeter,
18 dB/octave woofers
SYSTEM COMPONENTS:
• Cabinet: Enclosure (Not for Sale)
• Grille: 443589-001,443580-001 (WH)
• Low Frequency Driver: Dual 4” (100 mm) Poly Plas,™shielded
woofer with dual neodymium and 32 mm
(1.25 in) voice coil on a vented aluminum former
SYSTEM COMPONENTS:
(CONT’D)
• DC Resistance: 6.9 ohms ± 10%
• High Frequency Driver: 3/4” (19 mm) Titanium-laminate
dome tweeter, shielded neodymium
magnet Ferrofuild® cooling
• DC Resistance: 3.1 ohms ± 10%
AURAL SWEEP TEST SPECIFICATIONS:
A.
System Aural Sweep Test: 6.0V Input, 60 Hz - 20 kHz
B. L.F. Aural Sweep Test: 5.0V Input, 80 Hz - kHz
C. H.F. Aural Sweep Test: 5.0V Input, 2 kHz - 20 kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions: 364mm (14.4 in) wide, 251 mm
(9.9 in) max depth including wall
bracket, 262 mm (10.3 in) side
depth,127 mm (5 in) height
• Net Weight: 7.0 lb (3.2 kg)
WARRANTY INFORMATION:
• Refer to Warranty Statement packed with each product.
• Transformer Taps: 30W, 15W, 7.5W at both 7.0V
and100V (plus 3.8W at 70V only)
Thru position is 4 ohms
WIRING DIAGRAM
Warranty Card
59660
Network
Assembly
443571-001
Tweeter
443574-001
Woofer (2)
443577-001
+ -
+ -
+ -
SEE NETWORK SCHEMATIC PAGE
Owner’s Manual
444529-001
Poly Foam Top
444530-001
Poly Foam Bottom
444531-001
Outer Carton
444532-001
444533-001(Wh)
Corner
Mount Bracket
444519-001
444516-001 (WH)
Stand Mount
Bracket
444518-001
444517-001
(WH)
GRN
WHT
GRN
WHT
WHT
YEL
NOTE: INDIVIDUAL PARTS FOR THE ABOVE CROSSOVER ARE NOT AVAILABLE.
A COMPLETE REPLACEMENT ASSEMBLY SHOULD BE ORDERED.
Page 2
JBL CONTROL CRV/WH
SCHEMATIC (443571--001)
JBL CONTROL CRV/WH
Input +
Input -
BLK
30W
15W
7.5W
3.8W
TRANS7
A2
A3
A4
A5
B1
B2
B3
B4
B5
A1
L1
0.47mH
BP
24uF/100V
R1
15W 2R2
R2
15W 0R7
C2
BP 4.7uF/100V
L2
0.22mH
TW
WF2
WF1
WHT
WHT
WHT
YEL
GRN
GRN
.205
.110
.250.250
.205
.205
RED
Individual Parts for the above crossover are not available.
A complete replacement assembly should be ordered.
Page 3
JBL CONTROLCRV/WH
COMPONENT EXPLODED VIEW
JBL CONTROL CRV/WH
Screw (8)
443588-001
443578-001(Wh)
T5 x25.4
Grille
443589-001
443580-001(WH)
Front enclosure not
available for sale
Woofer (2)
443577-001
Screw (8)
443576-001
T4 x 12
Tweeter
443574-001
HF Bracket
443573-001
Network
Assesmbly
443571-001
Damping
Material
not avail.
for sale
Screw (4)
443581-001
443563-001 (WH)
10-24 x 16
Claw
443582-001
443564-001 (WH)
EVA
443575-001
Screw (2)
443583-001
443565-001 (WH)
T3 x12
Silicon End Cap
443584-001
443566-001 (WH)
Lock Plate
443585-001
443567-001 (WH)
Screw (12)
443568-001
10-24 x 12
Port Tube not
available for sale
Rear enclosure not
available for sale
Screw (4)
443561-001
T3 x 8
EVA
443579-001
Loading...