®
Three-Way High Output
Control
Professional Series
Key Features:
䉴
Extended bandwidth, extremely smooth
frequency response.
䉴
Fully outdoor-capable design, featuring
WeatherMax™ multi-layer grille.
䉴
120° x 110° HF coverage.
䉴
150 Watt transformer for 70V or 100V
lines, with 4Ω thru.
䉴
SonicGuard®overload protection.
䉴
250 mm (10 in) fiberglass/Kevlar®cone LF
woofer, with neodymium magnet coaxial
125 mm (5 in) anodized aluminum cone
MR, and 25 mm (1 in) titanium diaphragm
compression driver.
䉴
Includes InvisiBall®mounting hardware,
plus ten 6 mm attachment points for suspension and optional U-bracket.
䉴
Sealed input panel cover and screw-down
input terminals.
Applications
The Control 30 utilizes high power components, computer optimized horn and coaxial
component design, patent-pending cabinet manufacturing techniques, and a complex network to
achieve smooth high fidelity performance,
extended bandwidth and well-controlled, defined
coverage from a compact loudspeaker.
A symmetrical mid-high frequency horn allows
use of the speaker in either vertical or horizontal
orientation. Smooth frequency response and
cone-midrange performance ensures excellent
sound character throughout the frequency band,
over the entire listening area.
The top-quality line distribution transformer,
designed for minimal insertion loss and reduced
saturation, allows use of either 70V or 100V distributed speaker lines. In bypass position, the
8 ohm impedance allows use of multiple speakers on a loudspeaker line.
The included InvisiBall mounting method is
simple to install, aims easily and provides a high
degree of theft deterrence. InvisiBall allows horizontal rotation of up to 41° off-axis and vertical
rotation of up to 36° (horn end inward) or 23°
(woofer end inward). Attachment points for the
optional MTC-30UB (-WH) U-bracket allows for
compact installation and is particularly useful for
low profile underbalcony applications.
Weather resistance has been maximized. The
neodymium magnet LF woofer has a fiberglass
and Kevlar composite cone, the surround is pure
butyl rubber, and the basket is rear loaded to
minimize exposure. The MR cone of the coaxial
mid-high driver is anodized aluminum with a formulation EPDM rubber surround, and the HF
compression driver’s diaphragm is pure titanium.
The coaxial component is protected by an
acoustically transparent screen. The grille is thermoset composite coated and stands up very well
to UV as well as humidity. The grille is backed
with our WeatherMax multi-layer foam, which
prevents the direct incursion of water. Nickel/zinc
rust-resistant terminals ensure a secure input connection. An MTC-PC2 sealed-entrance cover is
included to further protect the speaker’s terminals.
JBL’s exclusive SonicGuard overload protection
is virtually inaudible to the listener, ensuring reliability while providing full fidelity sound.
Available in black or white (-WH), the cabinet
will accept a variety of paints to match any
décor.
30
Indoor/Outdoor Monitor Speaker
Specifications:
Frequency Range (-10 dB)1: 38 Hz – 17 kHz
Frequency Response (± 3 dB)1: 40 Hz – 16 kHz
100 Hr Power Capacity2: 500 Watts Continuous Program Power
Maximum SPL @ 1m3: Short-Term: 123 dB; Long-Term: 117 dB
Nominal Sensitivity4: 93 dB, 2.83V @ 1m (3.3 ft)
Nominal Coverage Angle5: 120° H x 110° V
Directivity Factor (Q): 5.2, averaged 500 Hz to 10 kHz
Directivity Index (DI): 7.1 dB, averaged 500 Hz to 10 kHz
Nominal Impedance: 4 ohms
Crossover Type: 3rd order Low Pass LF, 2nd order High Pass/3rd order Low Pass MF,
Transformer Taps: 70V: 150W, 75W, 38W, 19W
Transducers:
Physical:
1
In Half Space
2
Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous
Program Power is defined as 3 dB above the Continuous Pink Noise Rating and is a conservative expression of the system’s
ability to handle normal speech and music program material.
3
Calculated from sensitivity and power handling, exclusive of power compression.
4
Half-space, averaged 100 Hz to 10 kHz
5
500 Hz to 10 kHz
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice
are an expression of that philosophy.
Recommended High-Pass: See Chart
Low Frequency: 250 mm (10 in) fiberglass/Kevlar
Mid Frequency: 125 mm (5 in) anodized aluminum cone with EPDM rubber
High Frequency: 25 mm (1 in) compression driver, pure titanium diaphragm with
Enclosure Material: High Impact PolyStyrene (HIPS) with 10% glass fill plus patent-
Overload Protection: SonicGuard full range power limiting to protect network and trans-
Environmental: IEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray,
Termination: Screw-down terminal strip, zinc plated copper base, nickel plated
Safety Agency Rating: Transformer is listed per UL1876
Dimensions (H x W x D): 593 x 372 x 345 mm (23.3 x 14.6 x 13.5 in)
Weight (ea): 18.9 kg (42 lb)
Shipping Weight (ea): 20.3 kg (45 lb)
Included Accessories: 1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x
Optional Accessories: MTC-30CM (-WH) to install speaker down from the ceiling.
250 Watts Continuous IEC Pink Noise
3rd order High Pass, HF, plus conjugate shaping circuitry.
100V: 150W, 75W, 38W
Thru Position: 4Ω nominal
®
round, 50 mm (2 in) voice coil on fiberglass former, neodymium magnet
(Terpolymer of Ethylene and Propylene) surround, 25 mm (1 in)
voice coil on fiberglass former
patented JBL diamond surround
pending internal 5 mm foamed polyurethane secondary mold
Grille: Thermoset composite coated steel, WeatherMax multi-layer foam
ducers.
temperature & UV. Passes Mil-Std-202F for salt spray.
metal screws/washers. Accepts up to 9 mm outside 4 mm inside open
lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).
Colors: Black or white (-WH)
305 mm InvisiBall Hex wrench.
MTC-30UB (-WH) U-Bracket
cone with pure butyl rubber sur-
䉴 Control 30 Three-Way High Output Indoor/Outdoor Monitor Speaker
p
100
90
80
SPL, 2.8V,1m (dB)
70
60
20
100 1000 10000
Frequency (Hz)
360
100
-6dB Beamwidth (degrees)
10
20 20000
100 1000 10000
Frequency (Hz)
20000
316
100
10
Impedance (Ohms)
1
Frequency Response, on axis in half-space (2, dotted
line) and full space (4, solid line) at thru (4Ω) setting,
Input Impedance.
Beamwidth vs. Frequency
V Beamwidth
H Beamwidth
12
128 [5.0]
106
[4.17]
87
[3.42]
C
/
L
372 [14.6]
7.2 [0.28] x 4
109 [4.29]
211 [8.3]
115 [4.5]
84 [3.3]
46 [1.8]
100 [3.9]
593
[23.3]
130 [5.1]
237 [9.3]
110
[4.3]
C
/
L
345 [13.5]
Dimensions in mm [inches]
127
[5.0]
556 [21.9]
107
[4.2]
Directivity Index, Q
20
10
Directivity Index (DI) ,dB
0
20
Directivity Index (dB)
100 1000 10000
Frequency (Hz)
20000
100
10
1
Horizontal Off Axis Frequency Response
10
0
-10
Attenuation (dB)
-20
-30
20
100 1000 10000
Frequency (Hz)
20000
Vertical Off Axis Frequency Response (up)
10
0
-10
Attenuation (dB)
-20
-30
20
100 1000 10000
Frequency (Hz)
20000
Vertical Off Axis Frequency Response (down)
10
0
-10
Attenuation (dB)
-20
-30
20
100 1000 10000
Frequency (Hz)
20000
Directivity Factor (Q)
0 deg Horz
10 deg Horz
20 deg Horz
30 deg Horz
40 deg Horz
50 deg Horz
0 deg
10 deg up
20 deg up
30 deg up
40 deg up
50 deg up
0 deg
10 deg down
20 deg down
30 deg down
40 deg down
50 deg down
Horizontal 1/3 Octave Polars
Architectural Specifications:
The loudspeaker shall consist of a 250 mm (10 in) low frequency
transducer, a coaxial 125 mm (5 in) mid frequency transducer with a
25 mm (1 in) compression driver, and frequency dividing network. The
low frequency driver’s voice coil shall be 50 mm (2 in) in diameter and
the mid frequency driver’s voice coil shall be 25 mm (1 in) in diameter.
Performance specifications of a typical unit shall be as follows:
Usable frequency response shall extend from 38 Hz to 17 kHz (10 dB
below rated sensitivity, half-space, no external equalization). Rated
power shall be at least 500 watts continuous program power for 100
continuous hours duration (defined as 3 dB above a test signal of filtered random pink noise conforming to IEC268-5). Measured sensitivity
shall be at least 93 dB-SPL (at 1m [3.3 ft] with 2.83V input, avg. 100 Hz
to 10 kHz).
The input shall be switchable for use either at nominal 4 ohms, or
on a 70.7V or 100V distributed speaker line via built-in transformer.
Selectable taps shall nominally be 150W, 75W, or 38W on a 70.7V or
100V distributed line, plus 19W on 70.7V line only.
The system shall be protected against damage from occasional overpowering via full range limiting, which shall be inaudible during
activation. The coaxial mid-high driver shall be horn loaded to cover
120 degrees horizontal by 110 degrees vertical with a high degree of
accuracy.
The cabinet shall be molded High Impact PolyStyrene (HIPS) with
ten percent glass fill, and a 5 mm internal foamed polyurethane
secondary mold. The grille shall be backed by multi-layer foam and be
secured via screws to keep it in place when facing downward. The
cabinet and grille shall be paintable.
The low frequency transducer shall have a neodymium magnet, a
cone of woven fiberglass and Kevlar
the frame protected from direct weather exposure. The mid frequency
transducer element of the coaxial mid-high driver shall have an
anodized aluminum cone with an EPDM rubber (a Terpolymer of
Ethylene and Propylene) surround, with the frame protected from
direct weather exposure. The compression driver shall be constructed
with a titanium diaphragm for weather resistance. The coaxial mid-high
driver shall be protected with a secondary acoustically transparent
screen. The system shall withstand Mil Spec 810 testing with specified
durations with no effect on its acoustical performance or structural
integrity; salt spray (method 509.3), temperature (method 501.3 and
502.3), humidity (method 507.3) and ultraviolet (method 505.3).
Further, it shall pass Mil-Std-202F (method 101D) for salt spray. They
system shall have an IEC 529 splashproof rating of IP-X5.
For theft deterrence, the installation access area shall be hidden
behind a snap-out cover on the front grille. The included ball mechanism shall be internal to the cabinet. The cabinet shall have ten (10)
6 mm mounting points including 3 on each side and 3 on top and
bottom and an accessory U-bracket shall be available. The grille logo
shall be rotatable for proper orientation with loudspeaker mounted
horizontally or vertically.
The external wiring connectors shall be screw-down terminals.
Overall cabinet dimensions shall be no greater than 593 high x
372 mm wide x 345 mm deep (23.3 x 14.6 x 13.5 in) and shall weigh
no more than 18.9 kg (42 lb). The finish shall be lightly textured black
or white.
The system shall be the JBL Model Control 30 (or Control 30-WH)
with included InvisiBall
®
and butyl rubber surround, with
®
(mounting system).
䉴 Control 30 Three-Way High Output Indoor/Outdoor Monitor Speaker
Vertical 1/3 Octave Polars
High-Pass Frequency Recommendations
The line-matching transformer in the Control 30 has
been designed to minimize saturation; however, it is recommended that the system be high-passed to prevent
very low-frequency content from overloading the transformer and/or the driving amplifier at high signal levels.
The high-pass requirements vary according to the tap
settings and number of speakers connected in parallel.
The following chart will eliminate risk of saturation,
even at full voltage (70V or 100V) peaks. Reducing the
drive voltage will enable a corresponding reduction of
high-pass frequency (24 dB/octave high-pass slope).
High Pass Recommendations for Control 30
1 or 2 speakers 3 or more speakers
19 Watt Tap 30 Hz 35 Hz
38 Watt Tap 35 Hz 40 Hz
75 Watt Tap 60 Hz 70 Hz
150 Watt Tap 80 Hz 100 Hz
4 Ohm Setting No High-Pass required
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
A Harman International Company
© Copyright 2007 JBL Professional
SS Control 30
CRP 5M
07/07
Loading...