Page 1
Control® 25AV
Professional Series – Shielded Indoor/Outdoor Monitor Speaker
SPECSHEET
Key Features:
• Video shielded for use near video monitors
• Extremely smooth frequency response
• Stainless steel grille for harsh environments
• 60 Watt transformer for 70V or 100V lines, with 8Ω thru
• SonicGuard™ overload protection
• 130 mm (5¼”) polypropylene coated woofer, 10 mm (¾”) titanium
coated horn-loaded tweeter
®
• Includes InvisiBall
• Screw-down input terminals
• 100° x 100° high frequency horn
mounting hardware and sealed input panel cover
Description:
The Control 25AV utilizes a deep cabinet, high power components and complex network to achieve extremely smooth high fidelity performance from a compact
2-way loudspeaker.
Premium performance capability and even coverage ensures excellent sound quality throughout the listening area. Magnetic shielding allows use of the speaker
in close proximity to video monitors.
The top-quality transformer, with reduced saturation, allows use on either 70 volt or 100 volt distributed speaker lines, with similar performance fidelity. In the
bypass position, the high 8Ω impedance allows use of more speakers on a loudspeaker line.
®
The unique, global patent pending InvisiBall
accepts a variety of paints to match any décor.
Weather resistance is maximized by a stainless steel grille, which is paintable. Coating the woofer in polypropylene and terminating its circumference in JBL’s
WeatherEdge™, a seamless, butyl rubber extension of the woofer surround, protects critical transducer elements. The polycarbonate tweeter diaphragm is
reinforced with a thin film of titanium for added rigidity and endurance. Nickel/zinc rust-resistant terminals ensure a secure input connection.
JBL’s exclusive SonicGuard overload protection is virtually inaudible to the listener, ensuring reliability while providing full fidelity sound.
The Control 25AV can be used full range or low frequencies can be further augmented with the addition of one of the Control Contractor subwoofer models.
Available in black or white (-WH).
mounting method is simple to install, aims easily, and provides a high degree of theft deterrence. The cabinet
Page 2
Control® 25AV
Professional Series – Shielded Indoor/Outdoor Monitor Speaker
SPECSHEET
Specifications:
System
Frequency Range (-10 dB)
Midrange (±1.5 dB, typical)2130 Hz – 14 kHz
100 Hr Power Capacity
Nominal Coverage 100° x 100°
Nominal Sensitivity
Nominal Coverage 100° x 100°
Maximum SPL @ 1m 113 dB continuous peak pink noise
Directivity Factor (Q) 4.9, averaged 500 Hz to 4 kHz
Directivity Index (DI) 6.9 dB, averaged 500 Hz to 4 kHz
Nominal Impedance 8 ohms
Minimum Impedance 6.7 ohms at 230 Hz
Crossover Type 2nd order lowpass, 2nd order highpass, complex
Transformer Taps 170V: 60W, 30W, 15W, 7.5W taps (Taps #4,#3,
1
70 Hz – 23 kHz
3
200 Watts Continuous Program Power
100 Watts Continuous Pink Noise
4
87 dB SPL, 1W @ 1 m (3.3ft)
107 dB continuous average pink noise
103 dB continuous average music or speech
optimization for maximally flat response
#2 & #1)
100V: 60W, 30W, 15W taps (Taps #3, #2, & #1)
Thru position: 8 nominal
Transducers
Low Frequency 130 mm (5.25 in) polypropylene-coated paper with
High Frequency 20 mm (0.75 in) titanium-coated PEI
WeatherEdge surround, 25 mm (1 in) voicecoil on
kapton former
Physical
Enclosure Material High-impact polystyrene
Grille Painted stainless steel, black or white to match
Overload Protection Full-range power limiting to protect network
Environmental Exceeds Mil Spec 810 for humidity, salt spray,
cabinet, paintable
and transducers. Internal fuse to protect during
exceptional overload condition
temperature & UV. IEC 529 IP-X4 splashproof rating
Termination Screw-down terminal strip, zinc-plated copper
Safety Agency Rating Transformer is listed per UL1876
Colors Black or white (-WH)
Rotation Against wall on InvisiBall Base: 37° vertical, 44°
Dimensions (H x W x D) 236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in)
Net Weight (each) 4.0 kg (9 lb)
Shipping Weight (pair) 9.0 kg (20 lb)
Included Accessories » 1 pair MTC-PC input panel cover, InvisiBall
Optional Accessories » MTC-25V for vertical columnar mounting of up to
1
In half-space (on wall)
2
In full-space
3
Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor for
100 hours continuously. Continuous program power is a conservative expression
of the system’s ability to handle normal speech and music program material and is
defined as 3 dB above the Continuous Pink Noise Rating.
4
Half-space (on wall) averaged 100 Hz to 10 kHz
JBL continually engages in research related to product improvement. Changes
introduced into existing products without notice are an expression of that philosophy.
base, nickel plated metal screws/washers, accepts
up to 9 mm outside 4 mm inside open lug (#6, #8
or #10), plus bare wire (up to 12 AWG)
horizontal
On bracket: 44° all directions
mounting base, 6 mm x 100 mm InvisiBall hex
wrench
3 speakers
» MTC-25/23H for horizontal splaying of 2
speakers. Three brackets array either 3 or 6
speakers in a hanging array module for 360°
horizontal coverage.
» MTC-28/25CM to install speaker down from the
ceiling. Check JBL Control Contractor Bracket and
Adapter Handbook.
» MTC-xxWMG WeatherMax™ Stainless Steel Grille
with a three-layer backing, including vapor barrier
to break up driving precipitation. Available in black
or white (-WH).
Page 3
Control® 25AV
Directivity Index,Q:
Tap #4
Tap #1
Directivity Index,Q:
Horizontal Off Axis Frequency Response:
Professional Series – Shielded Indoor/Outdoor Monitor Speaker
SPECSHEET
Frequency Response:
Directivity Index,Q:
On axis in half-space (2pi, solid line) and full-space (4pi, dotted line)
at thru (8Ω) setting Input Impedance
Frequency Response:
In half-space with 70.7V input, taps #1 through #4.
For 100V input, raise each curve 3 dB.
Beamwidth vs. Frequency:
Horizontal Off Axis Frequency Response:
Tap #4
Vertical Off Axis Frequency Response (up):
Tap #1
Vertical Off Axis Frequency Response (down):
Page 4
Control® 25AV
Professional Series – Shielded Indoor/Outdoor Monitor Speaker
SPECSHEET
Architectural Specifications:
The loudspeaker shall consist of a 135 mm (5-1/4 in) low frequency transducer, 20 mm (3/4 in) high frequency transducer, and frequency dividing network
installed in ported enclosure. The low frequency voice coil shall be 25 mm (1 in) in diameter.
Performance specifications of a typical unit shall be as follows: Usable frequency response shall extend from 70 Hz to 23 kHz (10 dB below rated sensitivity,
in half-space, with no external equalization) and the speaker shall be flat from 130 Hz to 14 kHz (typically ±1.5 dB). Rated power shall be at least 200 watts
continuous program power for 100 continuous hours duration (defined a 3 dB above a test signal of filtered random pink noise conforming to international
standard IEC268-5). Measured sensitivity shall be at least 87 dB-SPL (at 1m [3.3ft] with 2.83V input, averaged from 100 Hz to 10 kHz).
The input shall be switchable for use either at nominal 8 ohms, or on a 70.7V or 100V distributed speaker line via a built-in 60W transformer. Selectable taps
shall allow operation nominally at 15W, 30W or 60W from either a 70.7V or 100V distributed speaker line, plus 7.5W from a 70.7V line only.
The system shall be protected against damage from occasional overpowering via full range limiting that limits the power to the network and transducers. The
limiting system shall be inaudible during activation. The high frequency transducer shall be horn-loaded to more evenly cover a nominal 90° horizontal by 90°
vertical area.
The enclosure shall be constructed of high-impact polystyrene and the grille shall be made of treated stainless steel for protection against the elements in
outdoor applications, and for easy paintability of both cabinet and grille. The grille shall be secured via screws to keep it in place when facing downward.
The low frequency transducer shall have a polypropylene-coated cone and a butyl rubber surround which shall extend seamlessly over the edge of the speaker
frame to protect against the elements. The high frequency transducer shall be constructed of polycarbonate, reinforced with a titanium film for additional weather
resistance. The system shall withstand Mil Spec 810 testing with specified durations for exposure to the following environments with no effect on its acoustical
performance or structural integrity: salt spray (method 509.3), temperature (method 501.3 and 502.3), humidity (method 507.3) and ultra-violet (method 505.3).
The system shall have an IEC 529 splashproof rating of IP-X4.
For theft deterrence, the installation access area shall be hidden behind a snap-out cover, and the access area shall be on the front of the loudspeaker for ease
of installation and adjustment. The loudspeaker shall be rotatable over a minimum of ±35° in all directions via a ball-type mounting system. The ball mechanism
shall be internal to the cabinet to allow low-profile mounting and better stability via short moment arm. The logo shall be rotatable for proper orientation when
the loudspeaker is mounted horizontally or vertically.
The external wiring connectors shall be screw-down terminals. Overall cabinet dimensions shall be no greater than 236 high x 186 wide x 159 mm deep (9.3 x
7.4 x 6.3 in). and shall weigh no more than 4.0 kg (9 lb). The finish shall be lightly textured black or white.
The system shall be the JBL Model Control 25AV (or Control 25AVWH) with included InvisiBall™ mounting system.
Mounting Dimensions:
Dimensions in inches (mm)
Page 5
Control® 25AV
Horizontal 1/3 Octave Polars
Professional Series – Shielded Indoor/Outdoor Monitor Speaker
SPECSHEET
Horizontal 1/3 Octave Polars:
Page 6
Control® 25AV
Vertical 1/3 Octave Polars
Professional Series – Shielded Indoor/Outdoor Monitor Speaker
SPECSHEET
Vertical 1/3 Octave Polars:
© 2019 Harman International. www.jblpro.com Issued: 7/2019
Loading...