JBL Control 25AV User Manual
Control
®
25AV
Shielded Indoor/Outdoor
Monitor Speaker
Key Features:
Video shielded for use near video
monitors.
Extremely smooth frequency response.
Stainless steel grille for harsh
environments.
60 Watt transformer for 70V or 100V
lines, with 8 thru.
SonicGuardTMoverload protection.
130 mm (5¼") polypropylene coated
woofer, 10 mm (¾") titanium coated
horn-loaded tweeter.
Includes InvisiBall®mounting
hardware and sealed input panel cover.
Screw-down input terminals.
100° x 100° high frequency horn.
The Control
®
25AV utilizes a deep
cabinet, high power components and
complex network to achieve extremely
smooth high fidelity performance from a
compact 2-way loudspeaker.
Premium performance capability and
even coverage ensures excellent sound
quality throughout the listening area.
Magnetic shielding allows use of the
speaker in close proximity to video monitors.
The top-quality transformer, with
reduced saturation, allows use on either
70 volt or 100 volt distributed speaker
lines, with similar performance fidelity. In
the bypass position, the high 8 impedance allows use of more speakers on a
loudspeaker line.
The unique, global patent pending
InvisiBall
®
mounting method is simple to
install, aims easily, and provides a high
degree of theft deterrence.
The cabinet accepts a variety of paints
to match any décor.
Weather resistance is maximized by a
stainless steel grille, which is paintable.
Coating the woofer in polypropylene and
terminating its circumference in JBL’s
WeatherEdge
TM
, a seamless, butyl rubber
extension of the woofer surround, protects critical transducer elements. The
polycarbonate tweeter diaphragm is reinforced with a thin film of titanium for
added rigidity and endurance. Nickel/zinc
rust-resistant terminals ensure a secure
input connection.
JBL’s exclusive SonicGuard overload
protection is virtually inaudible to the listener, ensuring reliability while providing
full fidelity sound.
The Control 25AV can be used full
range or low frequencies can be further
augmented with the addition of one of
the Control Contractor subwoofer models.
Available in black or white (-WH)
Specifications:
Freq. Range (-10 dB)1: 70 Hz - 23 kHz
Midrange (±1.5 dB, typical)2: 130 Hz - 14 kHz
100 Hr Power Capacity
3
: 200 Watts Continuous Program Power
100 Watts Continuous Pink Noise
Nominal Coverage: 100° x 100°
Nominal Sensitivity4: 87 dB SPL, 1W @ 1 m (3.3ft)
Nominal Coverage: 100° x 100°
Maximum SPL @ 1m: 113 dB continuous peak pink noise
107 dB continuous average pink noise
103 dB continuous average music or speech
Directivity Factor (Q): 4.9, averaged 500 Hz to 4 kHz
Directivity Index (DI): 6.9 dB, averaged 500 Hz to 4 kHz
Nominal Impedance: 8 ohms
Minimum Impedance: 6.7 ohms at 230 Hz
Crossover Type: Second Order Lowpass, Second Order Highpass, Complex
Optimization for Maximally Flat Response
Transformer Taps: 170V: 60W, 30W, 15W, 7.5W taps (Taps #4,#3, #2 & #1)
100V: 60W, 30W, 15W taps (Taps #3, #2, & #1)
Thru position: 8 nominal
Transducers:
Low-Frequency: 130 mm (5.25 in) polypropylene-coated paper with WeatherEdge
surround, 25 mm (1 in) voicecoil on kapton former
High-Frequency: 20 mm (.75 in) titanium coated PEI
Physical:
Enclosure Material: High Impact polystyrene
Grille: Painted stainless steel, black or white to match cabinet, paintable
Overload Protection: Full-range power limiting to protect network and transducers. Internal
fuse to protect during exceptional overload condition
Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IEC
529 IP-X4 splashproof rating
Termination: Screw-down terminal strip, zinc-plated copper base, nickel plated
metal screws/washers, accepts up to 9 mm outside 4 mm inside open
lug (#6, #8 or #10), plus bare wire. (up to 12 AWG)
Safety Agency Rating: Transformer is listed per UL1876
Colors: Black or white (-WH)
Rotation: Against wall on InvisiBall Base: 37° vertical 44° horizontal
On bracket: 44° all directions
Dimensions (H x W x D): 236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in)
Net Weight (ea): 4.0 kg (9 lbs)
Shipping Weight (pair): 9.0 kg (20 lbs) per pair
Included Accessories: 1 Pr MTC-PC input panel cover, InvisiBall mounting base, 6 mm x 100
mm InvisiBall hex wrench
Optional Accessories: MTC-25V for vertical columnar mounting of up to 3 speakers
MTC-25/23H for horizontal splaying of 2 speakers. Three brackets
array either 3 or 6 speakers in a hanging array module for 360°
horizontal coverage.
MTC-28/25CM to install speaker down from the ceiling.
Check JBL Control Contractor Bracket and Adapter Handbook.
MTC-xxWMG WeatherMax™ Stainless Steel Grille with a three-layer
backing, including vapor barrier to break up driving precipitation.
Available in black or white (-WH).
1
In half-space (on wall). 2In full-space
3
Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously.
Continuous program power is a conservative expression of the system’s ability to handle normal speech and music
program material and is defined as 3 dB above the Continuous Pink Noise Rating.
4
Half-space (on wall) averaged 100 Hz to 10 kHz.
JBL continually engages in research related to product improvement. Changes introduced into existing products with-
out notice are an expression of that philosophy.
Professional Series
Control®25AV Shielded Indoor/Outdoor Monitor
Frequency Response, on axis in
half-space (2, solid line) and
full-space (4, dotted line), in
thru (8 ohm), with Input
Impedance
Frequency Response, in halfspace with 70.7V input, taps #1
through #4. For 100V input, raise
each curve 3 dB.
Beamwidth
Directivity Index, Q
Horizontal Off Axis Frequency Response
Vertical Off Axis Frequency Response (up)
Vertical Off Axis Frequency Response (down)
Tap #4
Tap #1
Loading...