JBL CONTROL 226C/T Specifications
Control
Professional Series
Key Features:
䉴
Consistent 120° broadband pattern
control for exceptional coverage.
䉴
Coaxial design featuring:
• Kevlar-reinforced 165 mm (6.5 in)
woofer
䉴
• 25 mm (1 in) compression driver.
䉴 Extraordinary clarity for speech and
vocals with extended frequency
response for music.
䉴 150 Watts Power Handling.
䉴 Advanced high-slope crossover network
for constant coverage and smooth,
natural midrange.
䉴 Integrated back can with clean,
contemporary grille.
Applications:
The JBL Professional Control 226C/T is a
premium in-ceiling professional
loudspeaker designed for applications
requiring superior quality sound in ceilingmount applications. Delivering exceptional
next-generation performance in a medium
format coaxial point source design, the
Control 226C/T incorporates breakthrough
performance features such as best-in-class
pattern control to provide a consistent
sound throughout the listening area.
Especially wide coverage allows fewer
speakers to cover the space, reducing both
the material and labor cost for the
installation.
The Control 226C/T features a 165 mm
(6.5 in) Kevlar-reinforced low frequency
driver coupled with a 25 mm (1 in) exit
titanium compression driver for
outstanding reliability and performance.
The system is complete with a pre-attached
back can and is designed for years of
maintenance free use.
Easy to install, the Control 226C/T
features JBL Professional’s proven C-Ring
with Tile Rail suspension system.
Installation can be accomplished from
beneath the ceiling structure for instances
when access above the ceiling tile is not
possible. Additionally, the removable
multi-pin locking connector, with secure
screw-down terminals, allows for prewiring the input wires for easy clip-on
convenience during installation.
A top quality, low saturation 68 Watt
multi-tap transformer comes pre-attached
on the Control 226C/T enabling the system
to be used on 70V or 100V distributed
speaker lines. The system can be used in
either 8 ohm (low impedance) or
transformer mode by selecting the desired
function via the baffle mounted impedance
switch.
The clean, contemporary look of the
Control 226C/T’s grille is designed to suit a
variety of settings, offering a simple,
elegant appearance that fits into a wide
variety of décors.
®
6.5" Coaxial Ceiling
Loudspeaker with HF
226C/T
Compression Driver
Preliminary Specifications:
System: Frequency Range (-10 dB)1: 47 Hz - 19 kHz
Transducers: Low Frequency Driver: 165 mm (6.5 in) Kevlar reinforced cone
Enclosure: Input Connectors: Two removable locking 2-pin connector with
1
In half space (in ceiling)
2
Average 1 kHz to 16 kHz
3
IEC standard, full bandwidth pink noise with 6 dB crest factor.
4
Measured in half space (in ceiling), ave 100 Hz - 10 kHz
5
Measured in full space with 6 dB added for half-space calculation. Method used by some European manufacturers, listed
for comparison purposes.
6
Calculated based on power rating and measured half-space sensitivity, exclusive of power compression.
JBL continually engages in research related to product improvement. Some materials, production methods and design
refinements are introduced into existing products without notice as a routine expression of that philosophy. For this
reason, any current JBL product may differ in some respect from its published description, but will always equal or
exceed the original design specifications unless otherwise stated.
Frequency Response (±3 dB)1: 74 Hz - 17 kHz
Nominal Impedance (bypass mode): 8 ohms
Dimensions (Diameter x Depth): Ø 330 mm (13 in) round baffle x depth from
Shipping Weight (in pairs): 23.9 kg (52.5 lb)
Coverage Pattern2: 120° conical, broadband
Directivity Factor (Q): 6 (1 k - 16 kHz)
Directivity Index (DI): 7.9 dB (1 k - 16 kHz)
Long-Term System 150 W (600 W peak), 2 hrs
Power Rating, IEC3: 100 W (400 W peak), 100 hrs
Sensitivity (2.83V @ 1 m): 90 dB
Maximum SPL6: 112 dB continuous average (118 dB peak)
Crossover Network: 2.2 kHz, 3rd order (18 dB/oct) high-pass plus
Transformer Taps: 70V: 68W, 34W, 17W, 8.5W
High Frequency Driver: 25 mm (1 in) exit compression driver
Tap Settings: 8 ohm
Safety Agency Rating: Suitable for use in air handling spaces per
Cutout Size: Ø 307 mm (12.1 in)
Net Weight: 9.1 kg (20.0 lb)
Included Accessories: Press-in Grille, C-Ring, Tile Rails.
Optional Accessories: MTC-19NC New Construction Bracket
4
measured half-space
95 dB5computed for competitive comparison
conjugate to HF, 3rd order low-pass to LF.
100V: 68W, 34W, 17W
screw-down terminals. Max wire 12 AWG
(2.5 mm)
1) + in, 2) – in, A) + loop thru, B) – loop thru
8.5W @ 70V, 17W @ 100V
17W @ 70V, 34W @ 100V
34W @ 70V, 68W @ 100V
68W @ 70V, n/c @ 100V
UL1480, UL2043, NFPA90 & NFPA 70. S7232/UL
Listed, Signaling Speaker. Transformer UL
registered per UL1876. In accordance with
IEC60849/EN60849.
back of baffle of 246 mm (9.7 in)
MTC-19MR Mud Ring Construction Bracket
䉴 Control®226C/T 6.5" Coaxial Ceiling Loudspeaker
Beamwidth:
Frequency Response:
Half-space (2, mounted in ceiling) in 0.5 cu ft Backbox
Dimensions:
Directivity Index:
Horizontal Off-Axis Frequency Response:
All measurements obtained without signal processing.
Graphs are from unaltered measurement data.
330
(13.0)
302
(11.9)
252
(9.9)
(10.0)
Ø 330 (13.0)
Ø 302 (11.9)
256
Dimensions in mm (in)
Ø 330 (13.0)
Ø 298 (11.8)
(Grille Surface)
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
A Harman International Company
© Copyright 2010 JBL Professional
www.jblpro.com
SS C226C/T
CRP
03/10
Loading...