JBL CHARGE 4 Service Manual v1.2

Service Manual

CHARGE 4

(S/N Starting from TL)

CONTENTS

Safety Instruction, Warning & Notes
Technical Specifications
Trouble Shooting Chart

OTA Upgrade Method

Disassembly&Reassembly Procedures
Set Block Diagram
Schematic & Layout Diagrams
Set Mechanical Exploded View
Packaging Exploded View
Spare Parts List
Revision List

Released by Global Quality harman/kardon, Inc.

2
5
6

10
11
25
26

44

45

46

49

Ver. 1.2 09/2018

Important Safety Instructions



1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including
amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the
point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases,
are placed on the apparatus.

16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC
receptacle.

17. The mains plug of the power supply cord shall remain readily operable.

18. Do not expose batteries to excessive heat such as sunshine, fire or the like.

For Products That Transmit and
Receive RF Energy:

FCC Regulations (USA Only)

FCC Information For Users

This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference; and (2) this device must
accept any interference received, including interference that
may cause undesired operation.

Radio and Television Interference

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio
or television reception, which can be determined by turning
the equipment off and then on, the user is encouraged to try
to correct the interference by one or more of the following
measures:

• Increase the separation between the equipment and
receiver.

• Connect the equipment to a different outlet so that the
equipment and receiver are on different branch circuits.

• Consult the dealer or an experienced radio/TV technician
for help.

NOTE: Changes or modifications not expressly approved
by Harman could void the user’s authority to operate the
equipment.

For Canadian Model

This Class B digital apparatus complies with Canadian
ICES-003.

Modèle pour les Canadien

Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.

For Products with Radio Receivers
That Can Use an External Antenna:

CATV or Antenna Grounding

If an outside antenna or cable system is connected to this
product, be certain that it is grounded so as to provide some
protection against voltage surges and static charges. Section
810 of the National Electrical Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes and requirements of the grounding electrode.

Note to CATV System Installer:

This reminder is provided to call the CATV (cable TV) system
installer’s attention to article 820-40 of the NEC, which
provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as possible.

For CD/DVD/Blu-ray Disc™ Players:

IC Statement and Warning (Canada Only)

This Class B digital apparatus complies with Canadian ICES-

003. Cet appareil numérique de la classe B est conforme à la

norme NMB-003 du Canada.

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

THE LIGHTNING FLASH WITH AN ARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF UNINSULATED
“DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S
ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO
CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT OPERATING AND
MAINTENANCE (SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE PRODUCT.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.

Caution:

This product uses a laser system. To prevent direct exposure
to the laser beam, do not open the cabinet enclosure or defeat
any of the safety mechanisms provided for your protection.
DO NOT STARE INTO THE LASER BEAM. To ensure proper use
of this product, please read the owner’s manual carefully and
retain it for future use. Should the unit require maintenance
or repair, please contact your local Harman Kardon service
center. Refer servicing to qualified personnel only.

For Products That Include Batteries:

Instructions for Users on Removal and Disposal of
Used Batteries.

CAUTION

Risk of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.

Alkaline batteries are considered nonhazardous.
Rechargeable batteries (i.e., nickel cadmium, nickel metal­hydride, lithium and lithium-ion) are considered hazardous
household materials and may pose an unnecessary health
and safety risk.

In the European Union and other locations, it is illegal to
dispose of any battery with household trash. All batteries
must be disposed of in an environmentally sound manner.
Contact your local waste management officials for information
regarding the environmentally sound collection, recycling and
disposal of used batteries.

To remove the batteries from your equipment or remote
control, reverse the procedure described for inserting
batteries in the owner’s manual.

For products with a built-in battery that lasts for the lifetime of
the product, removal may not be possible for the user. In this
case, recycling or recovery centers handle the dismantling of
the product and the removal of the battery. If, for any reason, it
becomes necessary to replace such a battery, this procedure
must be performed by authorized service centers.



Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called

Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field effect transistors and

semiconductor "chip" components.

The following techniques should be used to help reduce the incidence of component damage caused by static electricity.

1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any electrostatic charge on

your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging wrist strap device,

which should be removed for potential shock reasons prior to applying power to the unit under test.

2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to

prevent electrostatic charge build-up or exposure of the assembly .

3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.

4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static" can generate electrical charges

sufficient to damage ES devices.

5. Do not use freon-propelled chemicals. These can generate electrical change sufficient to damage ES devices.

6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement

ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material.)

7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the

chassis or circuit assembly into which the device will be installed.

CAUTION :

8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the brushing together

or your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity sufficient to damage an ES devices.

Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.

Each precaution in this manual should be followed during servicing.

Components identified with the IEC symbol in the parts list are special significance to safety . When replacing a component identified with

, use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the

parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts are acceptably

insulated from the supply circuit before retuming the product to the customer.

SAFETY PRECAUTIONS

The following check should be performed for the continued
protection of the customer and service technician.

LEAKAGE CURRENT CHECK

Measure leakage current to a known earth ground (water
pipe, conduit, etc.) by connecting a leakage current tester
between the earth ground and all exposed metal parts of the
appliance (input/output terminals, screwheads, metal
overlays, control shaft, etc.). Plug the AC line cord of the
appliance directly into a 120V AC 60Hz outlet and turn the
AC power switch on. Any current measured must not exceed
o.5mA.

Reading should
not be above

0.5mA
Device
under
test

Leakage
current
tester



Test all
exposed metal
surfaces

Also test with
plug reversed
(Using AC adapter
plug as required)

Earth
ground

AC Leakage Test

ANY MEASUREMENTS NOT WITHIN THE LIMITS
OUTLINED ABOVE ARE INDICATIVE OF A
POTENTIAL SHOCK HAZARD AND MUST BE
CORRECTED BEFORE RETURNING THE APPLIANCE
TO THE CUSTOMER.

TECHNICAL SPECIFICATIONS

Model No.: CHARGE4

•

Bluetooth version: 4.2

•

Support: A2DP V1.3, AVRCP V1.6

•

Transducer: 50 x 90mm

•

Output power: 30W RMS

•

Frequency response:

•

• Signal- -noise ratio:

• Battery type: Lithium-ion polymer

• Battery charge time:

•

60Hz– 20kHz

>80dBto

4 hours @ 5V/2.3A

(varies by volume level and audio content)Music playtime: up to 20 hours

3.6V, 7500mAh

• Bluetooth transmitter power:

USB charge out: 5V/2A (maximum)

•

• Bluetooth transmitter frequency

• Bluetooth transmitter modulation:

• Dimensions (H x W x D):

Weight: 965g

•

0-20dBm

220 x 95 x 93 (mm)

range: 2.402 –

GFSK, π/4-DQPSK, 8DPSK

2.480GHz

Dut cannot power on

1.Dut can’t powe r on

Trouble shooting chart

Yes

YES

Dut is in Demo

model,Exit Demo model

No

No

Check the power keyis Ok or not

Replace the Power key

Yes

Check the battery is OK or not

No

Replace the battery

no

Yes

Replace the FFC cable

Check the FFC cable(12pin) connect
main board and key board

No

Yes

Replace the mainboard

Plug USB c able,the

power LED on

Dut cannot be charged

Trouble shooting chart

Yes

NO

Replace the USB cable

Check whether the USB board

is connected OK or not

NO

Fix it or replace the 4pin cable

Yes

Check the USB board

output is 5V or not?

Replace the USB board

Yes

Dut can

2.

’t charge

Check the USB cable Ok or not

Replace the mainboard

Check the USB board 32pin

Trouble shooting chart

No audio output

from AUX pla y

YES

YES

cable

Yes

Fix them

Check the USB board output

Replace the USB board

NO

NO

Replace the main board

3.No audio output

from AUX play

4. No audio output from BT

Fix it

Check whether the
antenna is ok

Replace the main
board

YES

No audio output from BT

OTA Upgrade Method

Step1: Download JBL connection APP.

Step2: Connect Speaker and your cell phone via Bluetooth.

Step3: Run APP on your cell phone and press setting button.

Step4: If there is a remind of new firmware upgrade, You will see below interface. Press upgrade

and wait till it is done.

Disassembly Procedure

Tool list

Item Description Remark

1

2 Straight Screwdriver

Cross Screwdriver

Either electrical or manual

Potential scrap risk on materials

Process step Material Part Number

Step3&6 All FFC cable

Step7 Rubber foot & battery cover

Step9 LED Board

Step1/3/6/7/9

EAV

Please refer to
the SBOM

DISMANTLING INSTRUCTION

Use glue to fix antenna as below images show.

12.

shown below.

shown below.

KeyProcessforsplashͲprooforwaterͲproof

p

pgp

Process Ste

Step14
Step 17

Step 24

ReassemblingCheckpoint Remark

Screws must be fixed tightly, seal cover must be stick well
6FUews must be fixed tightly,E

Keep the waterproof and breathable membrane intact

VAs must be stuck well and tightly

2017Ͳ1Ͳ23 CONFIDENTIAL 9

Potentialscrapriskonmaterials

p

p

Speaker

EVA

Process Ste

Step1 Fabric grille Please refertotheSBOM

Step 5

Step

Step

9Key

7LED

Material PartNumber

boardrubberbuttonpad

boardrubberbuttonpad

Note:

1. Makesureallthelocationwhereneedtobefixedbyscrewsmustbeeven.

2. Afterreassembly,trytopressonepassiveradiatorandobservetheanotherifitcanstanduportakemorethan10sto

recoverflat.Ifyes,itshouldbeOKifyouhavenospecialsealingequipmentstote

3. Beforetesttheset,theglueshouldbeheldfor4hoursfordrying.

st

%ORFN'LDJUDP








Circuit Diagram-KEY&LED&CN600 Board

DAC_3V3

LED6_WHITE(80-100%)

LED5_WHITE(60-80%)

DAC_3V3

C177C1

77

00..1u1uF/F/1616VV//

XX7R7R

88ppiinn00..55mm
mm

XXP2P
2

8
7

686
8

686
8

R16R1
6

R15R1
5

WWHHITEI
TE

WWHHITEI
TE

LLEED13D
13

LLEED15D
15

6
5
4
3
2
1

10

8
7

GND9GND

6
5
4
3
2
1

LED4_WHITE(40-60%)

LED3_WHITE(20-40%)

LED2_WHITE(10%-20%)

LED1_Red(5%-10%)

R18R1
8

WWHHITEITE
LLEED14D14

WWHHITEI
TE

WWHHITEI
TE

RREDE
D

LLEED18D
18

LLEED17D
17

LLEED16D
16

686
8

686
8

686
8

R17R1
7

R20R2
0

686
8

R19R1
9

Circuit Diagram-KEY&LED&CN600 Board

Type A

6

1

VCC

2

USB_DN

D-

Shell B

3

USB_DP

D+

4

GND

Shell A

4PIN/2.0mm

4PIN/2.0mm

5

P1

P1

R22 NC/0R22 NC/0

AUX IN

P2

P2

PJ-403A-4.5

PJ-403A-4.5

1

1

2

2

3

3

4

4

6

6

5

5

ESDPSA0402V05

ESDPSA0402V05

A

ESD1

ESD1

C14

C14

NC/0.1uF/16V/X7R

NC/0.1uF/16V/X7R

NC/ESDPSA0402V05

NC/ESDPSA0402V05
NC/ESDPSA0402V05

NC/ESDPSA0402V05

ESD8

ESD8

ESD9

ESD9

ESDPSA0402V05

ESDPSA0402V05

ESD2

ESD2

CHARGE_USB5V_OUT

To Brazil
ESD should be labeled

ESD3

ESD3

C21

C21

NC/ESDPSA

NC/ESDPSA

NC/10uF/16V/X5R

NC/10uF/16V/X5R

R26 NC/0R26 NC/0

R27 NC/0R27 NC/0

C171000pF/50V/X7RC171000pF/50V/X7R

C15

C15
1000pF/50V/X7R

1000pF/50V/X7R

A

ESD4 NC/LVE16Y1R0ESD4 NC/LVE16Y1R0

C13 NC/0.1uF/50V/X7RC13 NC/0.1uF/50V/X7R

R21

R21

NC/0

NC/0

A

AUX_IN_R

AUX_IN_L

USB_5V

ESD5

ESD5

ESDPSA

ESDPSA

XP9

XP8

XP8
4PIN/2.00mm

4PIN/2.00mm

1

1

2

2

3

3

4

4

C18

C18

C19

C19

10uF/16V/X5R

10uF/16V/X5R

0.1uF/16V/X7R

0.1uF/16V/X7R

USBC_CC

USB_D-

USB_D+

R24 NC/0R24 NC/0
R25 NC/0R25 NC/0

R23

R23

ESD7

ESD7

ESD6

ESD6

ESDPSA0402V05

ESDPSA0402V05

ESDPSA0402V05

C20

C20
1000pF/50V/X7R

1000pF/50V/X7R

ESDPSA0402V05

XP9
4PIN/2.00mm

4PIN/2.00mm

1

1

2

2

3

3

4

4

Connect tomain board

A

33

32

32

GND

31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10

GND

XP3

XP3

34

32PIN/0.5mm

32PIN/0.5mm

31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9

9

8

8

7

7

6

6

5

5

4

4

3

3

2

2

1

1

AUX_IN_L

AUX_IN_R

USB_DN

USB_DP

USB_D+
USB_D-

5.1K

5.1K

C16

C16

NC/0.1uF/16V/X7R

NC/0.1uF/16V/X7R

CHARGE_USB5V_OUT

USB_5V

Circuit Diagram-KEY&LED&CN600 Board

C11
C11

F/1616VV//XX7R7R

connecttoMainboard

C5

C5

C4

C4

C3

C1
C1

F/1616VV//XX7R7R

C3

C2

C2

00..1u1uF/

1000p1000pF/

1000p1000pF/

F/5050VV//XX7R7R

1000p1000pF/

F/5050VV//XX7R7R

F/5050VV//XX7R7R

C6

1000p1000pF/

F/5050VV//XX7R7R

1000p1000pF/

C6

F/5050VV//XX7R7R

14

1

1

GND13GND

2

2

3

3

4

4

5

5

6

6

7

7

8

8

9

9

10

10

11

11

12

12

C8

C8

C9

C7

F/5050VV//XX7R7R

C9

1000p1000pF/

F/5050VV//XX7R7R

1000p1000pF/

F/5050VV//XX7R7R

1000p1000pF/F/5050VV//

XX7R7R C10C10

C7

1000p1000pF/

XXP1

P1
CCOON_14N_14PP_2_2
GGNDSNDS

POWER_KEY

R3
R3

KEY_PHONE

KEY_VOL+

KEY_VOL-

KEY_BT

KEY_LINK

WWHHIT
EITE

WWHHITEITE
LLEED2D2

WWHHIT
EITE

WWHHITEITE
LLEED4D4

LLEED
1D1

LLEED
3D3

POWER_W_LED

BT_W_LED

POWER_KEY

SYS_3V3

KEY_BT
KEY_LINK
KEY_PHONE

BT_W_LED
POWER_W_LED

KEY_VOL+
KEY_VOL-

RING_W_LED

SSW1
W1

SSW2
W2

SSW3
W3

SSW4
W4

SSW5
W5

SSW6
W6

SYS_3V3

00..1u1uF/

PPHHOO
NENE

VVOOL
+L+

VVOO
L-L-

BT
BT

LLIINK
NK

PPOWOW
ERER

R1

56

R1

56

R2

56

R2

56

56
56

R4

56

R4

56

RING_W_LED

SYS_3V3

1K
1K

F/1616VV//XX7R7R

Q1
Q1

PPNNPP__MMMMBBTT8550
CL8550CLT1T1

C12
C12

00..1u1uF/

47K4
7K

R7
R7

R11
R11

82
82

82
82

82
82

82
82

82
82

82
82

82
82

82
82

A K

R5
R5

LLEED
5D5

A K

R6
R6

LLEED
6D6

A K

R8
R8

LLEED
7D7

A K

R9
R9

LLEED
8D8

A K

R10

LLEED

R10

9D9

A K

R12
R12

LLEED10D10 LLEEDD-­WWHHITEITE

A K

R13
R13

LLEED11D11 LLEEDD-­WWHHITEITE

A K

R14
R14

LLEED12D12 LLEEDD-­WWHHITEITE

LLEEDD-­WWHHITEITE

LLEEDD-­WWHHITEITE

LLEEDD-­WWHHITEITE

LLEEDD-­WWHHITEITE

LLEEDD-­WWHHITEITE

Circuit Diagram-Main Board

SYSTEM ON/OFF

?@A;B

D8

D8

NC/MBRX140/40V/1A

NC/MBRX140/40V/1A

BAT_3V7

USB5V_OUT

R14 0R14 0

D9

D9

NC/MBRX140/40V/1A

NC/MBRX140/40V/1A

627

POWER_ON5

Power_ON

R6 47KR6 47K

C2

C2

89:;<

R7

100KR7100K

0.1uF/16V/X7R

0.1uF/16V/X7R

R3 100KR3 100K

MTP3401N3

MTP3401N3

Q1

Q1

DS

G

1uF/10V/X5R

1uF/10V/X5R

R5

10KR510K

Q3

Q3

NPN_3DG3904M

NPN_3DG3904M

C6

C6

NC/0.1uF/16V/X7R

NC/0.1uF/16V/X7R

=>

R4

4.7KR44.7K

D1

D1

D2

D2

:0.6V~1V

NC/MBRX140/40V/1A

NC/MBRX140/40V/1A

MBRX140/40V/1A

MBRX140/40V/1A

C3

C3

1uF/10V/X5R

1uF/10V/X5R

VDD_SYS

POWER Detection

USB_5V

R1

47KR147K

R2

C5

0.1uF/16V/X7RC50.1uF/16V/X7R

75KR275K

5V_DET

C110nF/50V/XR5 C110nF/50V/XR5

BAT_3V7

R739

R739

NC/243K

NC/243K

R219NC/100K R219NC/100K

BAT_DET

C212NC/10nF/50V/XR5 C212NC/10nF/50V/XR5

C217NC/10nF/50V/XR5 C217NC/10nF/50V/XR5

D3

D3

D S

IF

MBRX140/40V/1A

MBRX140/40V/1A

Q2

Q2

G

USB_5V

MTP3401N3

MTP3401N3

C4

C4

Power For Logic IC SLG4V4826V

BAT_3V7

U2

U2

1

VIN

VOUT

C12

C12

C13

C13

0.1uF/16V/X7R

0.1uF/16V/X7R

R11 10KR11 10K

NC/10UF/6.3V/X5R

NC/10UF/6.3V/X5R

2

GND
EN3BP

ME6213C33M5G

ME6213C33M5G

STB_3V3

5

4

C14

C14

0.1uF/16V/X7R

0.1uF/16V/X7R

VDD_SYS

VDD_SYS

USB5V_OUT

3.3V for I/O BT

U1

U1

1

VIN

2

C8

C7

10UF/6.3V/X5RC7 10UF/6.3V/X5R

0.1uF/16V/X7RC80.1uF/16V/X7R

R10 10KR10 10K

GND
EN3BP

ME6211C33M5G

ME6211C33M5G

3.3V FOR DAC & OP

D10

D10

MBRX140/40V/1A

MBRX140/40V/1A

D7

D7

MBRX140/40V/1A

MBRX140/40V/1A

C18

C17

C17

C18

0.1uF/16V/X7R

0.1uF/16V/X7R

R13 10KR13 10K

10UF/6.3V/X5R

10UF/6.3V/X5R

VOUT

5

4

U3

U3

1

VIN

2

GND
EN3BP

ME6213C33M5G

ME6213C33M5G

TP1TP1

R9 NC-/0R9 NC-/0

C9

10UF/6.3V/X5RC9 10UF/6.3V/X5R

VOUT

C101000pF/50V/X7R C101000pF/50V/X7R

C11

C11

0.1uF/16V/X7R

0.1uF/16V/X7R

5

4

SYS_3V3

TP2TP2

DAC_3V3

C20

C19

C19

10UF/6.3V/X5R

10UF/6.3V/X5R

C20

0.1uF/16V/X7R

0.1uF/16V/X7R

Circuit Diagram-Main Board

AMP_SDZ

GVDD

F/1616VV//XX7R7R

C203C203 1U1UF/

A

R199
R1991K1K

R201

R201

100100KK

//1%1%

C204C204 00..1u1uF/

F/1616VV//XX7R7R

R207

R207

2020KK//

1%1%

GVDD

R197
R197

NCNC//10
0K100K

U19
U19

1

2

3

C193
C193

4

5

6

7

Audio_in_amp

2U2UF/

NCNC

R200

A

R200

--22/0/
..

0

F/1010VV//
XX5R5R

8

9

10

/MUTE

11

12

A

13

14

15

16

MODSEL

/SDZ

/FAULTZ

RINP

RINN

PLIMIT

GVDD

GAIN/SLV

GND

LINP

LINN

/MUTE

AM2

AM1

AM0

SYNC

AMP

TTPPAA3128
D23128D2

TTPPAA3128
D23128D2

32

PVCC

31

PVCC

30

BSPR

OUTPR

GND

OUTNR

BSNR

GND

BSPL

OUTPL

GND

OUTNL

BSNL

PVCC

PVCC

GND

AVCC

C189C189 00..2222uuF/
F/5050VV//XX7R7R

29

28

27

26

C196C196 00..2222uuF/
F/5050VV//XX7R7R

25

24

C198C198 00..2222uuF/
F/5050VV//XX7R7R

23

22

21

20

C207C207 00..2222uuF/
F/5050VV//XX7R7R

19

18

17

33

XX5R5R

C208

F/2525VV//

C208

00..1u1uF/

XX5R5R

C187

F/2525VV//

C187

00..1u1uF/

CCE
7E7

+
+

470u470uF/

F/2525VV//

SMDSMD

C95
C95

AGND

F/2525VV//XX5R5R

AGND

C176

C96

C176

C96

22u22uF/

F/2525VV//

XX5R5R

NCNC//22u22uF/

22u22uF/

F/2525VV//

XX5R5R

330330ppF/
F/5050VV//
XX7R7R

R203
R203

NCNC/
/4747

R206
R206

NCNC/
/4747

R209
R209

10
10

C209
C209

330330ppF/
F/5050VV//
XX7R7R

AGND

+PVCC

R198
R198

10
10

C188
C188

L10
L10

C194C194 NCNC//100100ppF/
F/5050VV//NNP0P0

C201C201 NCNC//100100ppF/
F/5050VV//NNP0P0

L11
L11

+PVCC

44..77uuH
H//5A5A

44..77uuH
H//5A5A

C190
C190

NCNC//00..6868u
uF/F/63V63V

C202
C202

NCNC//00..6868u
uF/F/63V63V

C222
C222

00..6868uuF/
F/2525VV//XX7R7R

C223
C223

00..6868uuF/
F/2525VV//XX7R7R

C191
C191

00..11uuF/
F/2525VV//
XX5R5R

C205
C205

00..11uuF/
F/2525VV//
XX5R5R

C192
C192

00..0101uuF/
F/5050VV//XX7R7R

AGND

C206
C206

00..0101uuF/
F/5050VV//XX7R7R

R204
R204

56
56

C197C197 33003300ppF/
F/5050VV//XX7R7R

C200C200 33003300ppF/
F/5050VV//XX7R7R

R208
R208

56
56

C199

C199

NCNC//330

pF330pF

TTPP
4343

TTPP
4444

22PPIINN//22..
55mmmm

2

2

1

1

XXP
8P8

3Ω

Audio_out_R

AMP_MUTE

A

AGND

34

Audio_out_R Audio_in_amp

TTPP
4545

R214
R214

R213
R213

R210

NCNC

R210

--/0/0

GVDD

R212
R212

47K

NCN
C/0/0

10K
10K

R215
R215

100k
100k

47K

QQ1
212

NNPPN_3DN_3DG
G3904M3904M

A

C210
C210

22..2U2UF/
F/1010VV//
XX5R5R

/MUTE

Circuit Diagram-Main Board

SYS_3V3

R182

R182

R186

R186

44..7

K7K

44..7

K7K

I2C_SCL

I2C_SDA

IO_RESET

IO_INT

R189

33

R189

33

R190

33

R190

33

C174

C174

00..1u1uF/

F/1616VV//

XX7R7R

C175C175

1000p1000pF/F/5050VV//

XX7R7R

SYS_3V3

I/OExpander

R188
R1883333

R187
R1873333

R191
R191

10K
10K

R192
R192

NCNC//
10K10K

R193

NCNC//

R194

R193

10K

10K10K

R194

10K

connecttoLEDboard

XXP
6P6

88ppiinn00.

C224

C224

.55mmmm

00..1u1uF/

Q6
Q6

PPNNPP__MMMMBBTT
8550CL8550CLT1T1

47K

47K

R8
R8

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

GND9GND

10

R12

1K

R12

1K

LED_CTR

R16

47K

R16

47K

R15

R15

100K
100K

14

1

1

GND13GND

2

2

3

3

4

4

5

5

6
7
8

9
10
11
12

6
7
8
9
10
11
12

XXP
7P7

CCOON_14N_14PP
_2_2GGNDSNDS

Q7
Q7

NNPPN_3DN_3D
GG3904M3904M

LED1
LED2
LED3
LED4
LED5

SYS_3V3

R185
R185

10K
10K

KEY_PHONE

KEY_VOL+

KEY_VOL-

KEY_BT

KEY_LINK

SYS_3V3

Charge_Out_Status

Control_15V
Charge_In_Status

Charge_Out_2A

Charge_Out_On

LED1

LED2

LED3

LED4

LED5

LED6

TTPP
3232
TTPP
3333
TTPP
3434

TTPP
4141

TTPP
4242

TTPP
3535
TTPP
3636
TTPP
3737

TTPP

3939
TTPP
3838

TTPP

4040

DAC_3V3

POWER_KEY

FFB

11KK @@

2B2

100100MMHzH

C166

C166
10U10UF/
F/66..33VV//
XX5R5R

U18

21

U18

SCL

SDA

RSTN

INTN

AD0

AD1

AAWW952
3B9523B

GND

9

VCC

19

20

23

22

18

24

C167

00..1u1uF/

F/1616VV//

XX7R7R

P1_0
P1_1
P1_2
P1_3
P1_4
P1_5
P1_6
P1_7

P0_0
P0_1
P0_2
P0_3
P0_4
P0_5
P0_6
P0_7

GND

25

z

C167

1
2
3
4
14
15
16
17

LED1_Red(5%-10%)

5

LED2_WHITE(10%-20%)

6

LED3_WHITE(20-40%)

7

LED4_WHITE(40-60%)

8

LED5_WHITE(60-80%)

10
11

LED6_WHITE(80-100%)

12
13

R183

R184

R183

R184

10K

10K

10K

10K

10K

10K

10K

10K

LED6

KEY_BT
KEY_LINK
KEY_PHONE

BT_W_LED
POWER_W_LED

KEY_VOL+
KEY_VOL-

RING_W_LED

R130
R1303333

R133
R1333333

R135
R1353333

R137
R1373333

R138
R1383333

R145
R1453333

1000p1000pF/F/5050VV//

XX7R7R

C170C170

C171C171

XX7R7R

1000p1000pF/F/5050VV//

XX7R7R

C172C172

1000p1000pF/F/5050VV//

XX7R7R

1000p1000pF/F/5050VV//

C168C168

1000p1000pF/F/5050VV//

XX7R7R

C169C169

1000p1000pF/F/5050VV//

connecttoKEYboard

R148
R1483333

R150
R1503333

R152
R1523333
R154
R15400

R164
R16400

FFB

11KK @@

3B3

R169
R1693333

R202
R2023333

R205
R2053333

R211
R2113333

100100MMHzH
z

C173C173

XX7R7R

DAC_3V3

FFB
5B5

NCNC//11KK @@
100100MMHzHz

XX7R7R

F/1616VV//

IO_RESET

I2C_SCL

I2C_SDA

IO_INT

POWER_W_LED

BT_W_LED

RING_W_LED

IO_RESET

I2C_SCL

I2C_SDA

IO_INT

POWER_W_LED

BT_W_LED

RING_W_LED

R195

R195

R196

R196

SYS_3V3

XX7R7R

FFB

XX7R7R C185C185

1000p1000pF/F/5050VV//

XX7R7R C186C186

4B4
11KK @@

100100MMHzH
z

C177

C177

00..1u1uF/

F/1616VV//

C180C180

C178C178

C179C179

C181C181

1000p1000pF/F/5050VV//

XX7R7R C182C182

1000p1000pF/F/5050VV//

XX7R7R

1000p1000pF/F/5050VV//

XX7R7R

1000p1000pF/F/5050VV//

XX7R7R

1000p1000pF/F/5050VV//

XX7R7R

1000p1000pF/F/5050VV//

XX7R7R C183C183

1000p1000pF/F/5050VV//

XX7R7R C184C184

1000p1000pF/F/5050VV//

Circuit Diagram-Main Board

Dynamic Pressure Detection Circuit

Audio_out_R

C153C153 44..77uuF/

F/66..33VV//XX5R5R

V_REFE

R156
R156

R157
R157

U14
U14

DDZZ0
02002

1010KK/
/1%1%

4

V-

+IN B5-IN B6OUT B7V+

1010KK/
/1%1%

3

2

1

-IN A

+IN A

OUT A

8

10U10UF/
F/66..33VV//
XX5R5R

R158R158

1010KK//1%1%

C155C155 6868ppF/

F/5050VV//NNP0P0

C150
C150

C144C144 44..77uuF/

F/66..33VV//XX5R5R

OP_3V3

C151
C151

00..11uuF/
F/1616VV//
XX7R7R

C154C154 44..77uuF/

F/66..33VV//XX5R5R

V_REFE

V_REFE

DDZZ0
02002

U15
U15

R149
R149

1010KK/
/1%1%

2

3

4

V-

-IN A

+IN A

+IN B5-IN B6OUT B7V+

R159
R159

1010KK/
/1%1%

D5D51N41481N4

1

OUT A

C149
C149

8

10U10UF/
F/66..33VV//
XX5R5R

D6D6

1N41481N4148WS
WS

148WSWS

OP_3V3

C152
C152

00..11uuF/
F/1616VV//
XX7R7R

DAC_3V3

TTPP
2020

OP_3V3

R151
R151

R160

R160

100K
100K

R161
R161

C156

C156

10U10UF/
F/66..33VV//
XX5R5R

OP_3V3

NCNC

--/0/0

C145
C145

F/66..33VV//

XX5R5R

R53+R54+R63=1238.8K

11..22MM//1%1%

R163R163

10U10UF/

F/1616VV//XX7R7R

R153
R153

2222KK/

C146

/1%1%

C146

NCNC//00..1u1uF/

R155
R155

2222KK/
/1%1%

R162R162

1111..88K/K/±±1%1%

C147
C147

F/1616VV//

XX7R7R

2727K/K/±±1%1%

V_REFE

C148
C148

00..1u1uF/

NCNC//10U10UF/

F/66..33VV//XX5R5R

Audio_Det_CTL

R165
R165

11MM//
1%1%

R166
R166

10K
10K

Logic Control

TTPP
2727
TT

POWER_KEY

DC_BIAS

DC_BIAS

POWER_ON_OFF

POWER_OFF_READY

Audio_Det_CTL

R168
R168

100K
100K

QQ
1111

NNPPN_3DN_3DG
G3904M3904M

R167

Control_15V

STB_3V3

C162

C163

R172
R172

R173
R173
R175
R175

XX7R7R

100
100

C162

00..1u1uF/

F/1616VV//

C163

10U10UF/

F/66..33VV//

XX5R5R

1
2
3

1K
1K
1K
1K

C164
C164

100p100pF/

F/5050VV//

NNP0P0

NNP0P0

4

5
6

C165

7

C165

100p100pF/

F/5050VV//

R178
R178

R179
R179

SSLLGG44VV
4826348263

VDD
Power Key
Audio out
Power_On_Off

Power_Off_Ready
Audio_Input
ext Vref 367mV

1010KK/
/1%1%

5656KK/
/1%1%

U17
U17

5V_DET

NC
NC

VREG_EN

NC

Power On

GND

R180

11KK//

R180

1%1%

TTPP
2121

14
13
12
11

R174
R174

10

R177R177

9

100100

8

R181
R181

55..1111K
K//1%1%

TTPP

TTPP

2323

2222

TTPP

100
100

R50=10K

24

24

OP_3V3

TTPP
2525

TTPP
2626

VREG_EN

5V_DET

VREG_EN

POWER_ON

R170

PP2

TTPP

TTPP

828

2929

3030

TTPP
3131

R170

100K
100K

10K

R167

10K

C160
C160

00..11uuF/
F/1616VV//
XX7R7R

7

R71+R51+R64=62.11K

Circuit Diagram-Main Board

Audio In Detection

SYS_3V3

AUX_IN_L

AUX_IN_R

AUX_IN_L

AUX_IN_R

R123
R1233333

R126
R126

DAC Circuit

SYS_3V3

DAC_3V3

33
33

Audio_out_R

C126
C126

11uuF/
F/1010VV//
XX5R5R

C128
C128

11uuF/
F/1010VV//
XX5R5R

R329
R329

R328
R328

NCNC
/0/0

NCNC-

-/0/0

R120
R120

22..2
M2M

R128
R128

22..2
M2M

R131
R131

11KK//1
%1%

R121
R121

1212..
4K4K

Q8
Q8

22SSC271
2C2712

QQ1
010

22SSC271
2C2712

R129
R129

1212..
4K4K

SYS_3V3

A

C133

C132

C133

C132

00..1u1uF/

F/1616VV//XX77

10U10UF/

F/66..33VV//

XX5R5R

A

C136

C136

1000p1000pF/

F/5050VV//XX7R7R

A

C139

C143

C139

C143

NCNC//22U22UF/

F/66..33VV//XX5R5R

DAC_SDA

DAC_SCL

C140
C140

22..
XX5R5R C135C135

TTPP
4646

R136
R136

R144
R144

VDD

2

1

C134
C134

22..2U2UF/
F/1010VV//XX5R5R

2U2UF/F/1010VV//

R

R

11KK//1
%1%

R140
R1403333

R142
R1423333

R146
R146

D4
D4

BBAATT5
4C54C

100K1
00K

100K1
00K

C129
C129

11uuF/
F/1010VV//
XX5R5R

1

2

3

4

5

6

7

8

9

10

11

12

13

14

R125R125

150K150K

U13
U13

CPVDD

CAPP

CPGND

CAPM

VNEG

OUTL

OUTR

AVDD

AGND

VCOM

SDA

SCL

GPIO5

GPIO4

PCM5121_MUTE

DAC_SCL

DAC_SDA

Audio_out_R

PPCCMM51
215121

R127
R127

1M
1M

DVDD

DGND

LDOO

XSMT

ADR1

LRCK

GPIO6

MODE2

MODE1

ADR2

CPOI3

DIN

BCK

SCK

3

A

A

SYS_3V3

28

27

26

25

24

23

22

21

20

19

18

17

16

15

PCM5121_MUTE

I2C_SCL

I2C_SDA

Audio_out_R

R122
R122

27K
27K

R124

1K

R124

1K

Q9

22SSC271

2C2712

Q9

C130C130 00..11uuF/
F/1616VV//XX7R7R

VDDVDD

C131C131 00..11uuF/
F/1616VV//XX7R7R

I2S1_LRCLK

I2S1_DATA

I2S1_BCLKVDD

R139
R139

R141
R141

R143
R143

R147
R147

TTPP
1919

C127
C127

33003300ppF/
F/5050VV//XX7R7R

100K1
00K

10K
10K

10K
10K

100K1
00K

VDD

Audio_Detect

R61
R61

10k
10k

R132R132
NCNC//3333

I2S1_LRCLK

I2S1_DATA

I2S1_BCLK

MODE1=L,MODE2=L
Hardwired Mode
MODE1=L, MODE2=H

I2C mode

A

PCM5121_MUTE

00..1u1uF/

F/1616VV//

XX7R7R

10U10UF/

F/66..33VV//

XX5R5R

1000p1000pF/F/5050VV//

XX7R7R C141C141

Circuit Diagram-Main Board

BT_1.8V

SYS_3V3 VCC_BT

L6 500R/100MHzL6 500R/100MHz

CE4 330uF/6.3V+CE4 330uF/6.3V

C225

C225

C220

C220

+

22UF/6.3V/X5R

22UF/6.3V/X5R

22UF/6.3V/X5R

22UF/6.3V/X5R

VDD_MEM

TP11TP11

C103

C103

C104

C104

C10210UF/6.3V/X5R C10210UF/6.3V/X5R

0.1uF/16V/X7R

0.1uF/16V/X7R

1000pF/50V

1000pF/50V

VCC_BT

R94

R94
100K/5%

100K/5%

1uF/10V/X5R

1uF/10V/X5R

C105

C105

RST1RST1

REST

BT reset

U16

U16

1

GND

2

NC

3

NC
GND4SDA

NC/CP3.0C

NC/CP3.0C

GND

VCC

GND

SCL

Mic Circuit(Close To BT Modle Circuit)

R86 1KR86 1K

C98

C98

10UF/6.3V/X5R

R91

R91

2.21K

2.21K

MIC_IN

9
8

7
6
5

C137 NC/0.1uF/16V/X7RC137 NC/0.1uF/16V/X7R

R87NC/33 R87NC/33

I2C_SCL
I2C_SDA

R88NC/33 R88NC/33

SYS_3V3

C99

C99

0.1uF/16V/X7R

0.1uF/16V/X7R

C100

C100

15pF/50V/NP0

15pF/50V/NP0

A

10UF/6.3V/X5R

A

L5 15nHL5 15nH

C101

C101

39pF/50V/NP0

39pF/50V/NP0

MIC_BIAS

C97

C97
10nF/50V/XR5

10nF/50V/XR5

A

MIC

ESD1 NC/ESDPSAV053ESD1 NC/ESDPSAV053

TP9TP9

ESD2 ESDPSAV053ESD2 ESDPSAV053

2PIN/1.5MM

2PIN/1.5MM

2

2

J2

1

TP10TP10

A

J2

1

I2S1_BCLK
I2S1_LRCLK
I2S1_DATA_OUT

15pF/50V/NP0

15pF/50V/NP0
15pF/50V/NP0

15pF/50V/NP0
15pF/50V/NP0

15pF/50V/NP0

Power_Off_Ready
Power_On_Off

C117

C117

TP13TP13

TP16TP16

C118

C118

VCC_BT

D

REST

J1

SMA_VERJ1SMA_VER

1

22334

4

D

BAT_DET

R102 33R102 33
R103 33R103 33
R104 33R104 33

C119

C119

TP14TP14

R109 1KR109 1K

Detect5V_2.3A

TP18TP18

POWER_W_LED
BT_W_LED

RING_W_LED

GPIO8

1

L9 220/100MHzL9 220/100MHz

U11

U11
BM875H

BM875H

TP12TP12

SPI_CLK
SPI_MISO
SPI_CSB
SPI_MOSI

TP17TP17

R11433 R11433
R11533 R11533

R95 0R95 0

C107

C107

NC/15pF/50V/NP0

NC/15pF/50V/NP0

1

AIO0

2

AIO1

3

GND

4

I2S1_BCLK

5

I2S1_LRCLK

6

I2S1_DATAOUT

7

I2S1_DATA IN

8

GND

9

SPI_CLK

10

SPI_MISO

11

SPI_CSB

12

SPI_MOSI

13

GND

14

REST

15

UART_RTS

16

UART_CTS

17

UART_RX

18

UART_TX

19

LED0

20

LED1

21

LED2

22

GPIO8

23

I2C SDA

24

I2C SCL

C112 1UF/16V/X7RC112 1UF/16V/X7R

C108

C108

NC/15pF/50V/NP0

NC/15pF/50V/NP0

GPIO8

78

76

77

GND

VDD_3V3

GPIO1125I2S2_DATA IN26I2S2_DATA OUT27GPIO1428GPIO1529GPIO16

Audio IN Vlotage Divition Circuit

R1070R107

0

R1120R112

0

U12

U12

1

V+

2

NO1

3

COM1

4

IN1

5

NC1

SD20

SD20

IN1/IN2

L
H

AUX_L AUX_MIC_COM1
AUX_R AUX_MIC_COM2

NO2

COM2

IN2

NC2

GND

OFF
ON OFF

R100 NC/0R100 NC/0
R101 NC/0R101 NC/0

R96 3.24K/1%R96 3.24K/1%

R97 3.24K/1%R97 3.24K/1%

NCNO
ON

10
9
8
7
6

R98

R98

6.8K/1%

6.8K/1%

AUX_MIC_COM2
AUX_IN_MIC_CTL

AUX_RAUX_IN_MIC_CTL

A

C106 10UF/6.3V/X5RC106 10UF/6.3V/X5R

C109 10UF/6.3V/X5RC109 10UF/6.3V/X5R

R99

R99

6.8K/1%

6.8K/1%

A

TP15TP15

R108 100KR108 100K

R10610R106

AUX_IN_L

AUX_IN_R

audio in/mic

10

MIC_IN

C120

C120

AUX_MIC_COM1

0.1uF/16V/X7R

0.1uF/16V/X7R

AUX_L

A

AUX_IN_L

I2C_SDA
I2C_SCL

I2S1_BCLK
I2S1_LRCLK

I2S1_DATA_OUT
PCM5121_MUTE

I2C_SDA
I2C_SCL

AMP_MUTE

POWER_W_LED

BT_W_LED
RING_W_LED

IO_INT
IO_RESET

Power_Off_Ready
Power_On_Off

5V_DET

VREG_EN

BAT_DET

CHARGE_INT
Audio_Detect

Stand_by
AMP_SDZ
LED_CTR

Detect5V_2.3A

USB_D-

USB_D+

GPIO21

D

73

74

GND

GPIO3375GPIO34

A

70

67

69

66

72

68

65

GND

GND71GND

RF_IN

SPK_LP

SPK_LN

SPK_RP

SPK_RN

VBAT_SENSE

I2S2_LRCLK

MIC_LP

MIC_BISA_B64MIC_BIAS_A

MIC_LN
MIC_RP
MIC_RN

GND
GPIO32
GPIO31
GPIO30

V5.0

CHG_EXT

VBAT

1V8_OUT

VDD_MEM

VDD_PADS

GND
USB_D-

USB_D+

GND

I2S2_BCLK

GPIO27
GPIO26
GPIO25

63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40

R105 1KR105 1K

GPIO2439GPIO2338GPIO2237GND36GPIO2135GPIO2034GPIO1933GPIO1832GPIO17

30

31

MIC_BIAS

C113 10UF/6.3V/X5RC113 10UF/6.3V/X5R

C114 10UF/6.3V/X5RC114 10UF/6.3V/X5R

C115 10UF/6.3V/X5RC115 10UF/6.3V/X5R

C116 10UF/6.3V/X5RC116 10UF/6.3V/X5R

CHARGE_INT
VREG_EN

VCC_BT

VDD_MEM

5V_DET

C124

C124

NC/15pF/50V/NP0

NC/15pF/50V/NP0

USB_5V

VCC_BT

BT_1.8V

C121

C121

0.1uF/16V/X7R

0.1uF/16V/X7R

AUX_MIC_COM1
AUX_MIC_COM2

15pF/50V/NP0

15pF/50V/NP0

C122

C122

C125

C125

NC/15pF/50V/NP0

NC/15pF/50V/NP0

A

C123

C123

15pF/50V/NP0

15pF/50V/NP0

R116 2.87KR116 2.87K

R110 22R110 22
R111 22R111 22

R117 2.87KR117 2.87K

I2C_SDA
I2C_SCL

I2S1_BCLK
I2S1_LRCLK
I2S1_DATA

PCM5121_MUTE
AMP_MUTE

POWER_W_LED
BT_W_LED
RING_W_LED

IO_INT

IO_RESET

Power_Off_Ready
Power_On_Off

5V_DET

VREG_EN

BAT_DET
CHARGE_INT
Audio_Detect

Stand_by
AMP_SDZ

LED_CTR

Detect 5V_2.3A

AUX_IN_R

SYS_3V3

AUX_L

AUX_R

ESD8 NC/LVE16Y1R0ESD8 NC/LVE16Y1R0

C216 NC/1000pF/50V/X7RC216 NC/1000pF/50V/X7R

C215 NC/1000pF/50V/X7RC215 NC/1000pF/50V/X7R

C214 NC/1000pF/50V/X7RC214 NC/1000pF/50V/X7R

C213 NC/1000pF/50V/X7RC213 NC/1000pF/50V/X7R

R217 0R217 0
R216 NC/0R216 NC/0

A

Stand_by

R118 33R118 33

SYS_3V3

BT Debug

Audio_Detect

AMP_SDZ

HW_DET

IO_RESET

IO_INT

AMP_MUTE

AUX_IN_MIC_CTL

LED_CTR

GPIO21

PCM5121_MUTE

SPI_CSB
SPI_CLK

SPI_MOSI

SPI_MISO

VCC_BT

SPI_CSB1SPI_CSB1
SPI_CLK1SPI_CLK1
SPI_MOSI1SPI_MOSI1

SPI_MISO1SPI_MISO1

NC/6PIN/2.0mm

NC/6PIN/2.0mm
XP5

XP5

6

6

5

5

4

4

3

3

2

2

1

1

Circuit Diagram-Main Board

Charge Model

USB_5V

C76

C76

10UF/6.3V/X5R

10UF/6.3V/X5R

CE

DISC

BATT

SYS

SW2

BST

OTG

17
16
15
14
13
12

1.2MHz

TP6TP6

R68

R68

SW

C85

C85

VNTC

100K

100K

VREF

SYS_BAT

L4

L4

0.47uF/16V/X5R

0.47uF/16V/X5R

R72 100KR72 100K

2.2uH/5.5A

2.2uH/5.5A

VREF

R57

R57

10K

10K

R64

R64

15K

15K

C87

C87

NTC

;SDIT

NTC

330pF/50V/X7R

330pF/50V/X7R

C221

BAT_3V7

SYS_BAT

C88

C88

C89

C90

C90

10UF/6.3V/X5R

10UF/6.3V/X5R

10UF/6.3V/X5R

10UF/6.3V/X5R

C89

C91

C91

0.1uF/16V/X7R

0.1uF/16V/X7R

10UF/6.3V/X5R

10UF/6.3V/X5R

10UF/6.3V/X5R

10UF/6.3V/X5R

C221

I2C_SCL
I2C_SDA

C86

C86

0.1uF/16V/X7R

0.1uF/16V/X7R

R119 2.2R119 2.2

TP7TP7

R7033 R7033
R7133 R7133

C138

C138

C142

C142

33pF/50V

33pF/50V

33pF/50V

33pF/50V

JACK

JACK

6

6

5

5

4

4

3

3

2

2

1

1

XP2

XP2

TP8TP8

32PIN/0.5mm

32PIN/0.5mm

33

1

1

2

2

GND34GND

3

3

4

4

5

5

6

6

7

7

8

8

9

9

10

10

11

11

12

12

13

13

14

14

15

15

16

16

17

17

18

18

19

19

20

20

21

21

22

22

23

23

24

24

25

25

26

26

27

27

28

28

29

29

30

30

31

31

32

32
GND35GND

XP1

XP1

36

A

NC/1000pF/50V/X7R

NC/1000pF/50V/X7R

C110

C110

A

NC/1000pF/50V/X7R

NC/1000pF/50V/X7R

C111

C111

AUX_IN_L

AUX_IN_R

CHARGE_USB5V_OUT

USB_DN
USB_DP

USB_D+
USB_D-

USB_5V

R5933R59

R6033R60

33

33

21

20

22

DM

INT

STAT

MP2624GL

MP2624GL

VREF9AGND

SCL7SDA8ILIM

R7533R75

C93

C93

VREF

33

10UF/6.3V/X5R

10UF/6.3V/X5R

Charge_In_Status

NTC

18

19

NTC

11

10

R76

R76

14.3K/1%

14.3K/1%

R58 10KR58 10K

CHARGE_INT

4.7uF/10V/X5R

4.7uF/10V/X5R

SW

C92

C92

0.1uF/16V/X7R

0.1uF/16V/X7R

R90 10KR90 10K

U9

U9

1

DP

2

IN

3

PMID

4

SW1

5

PGND

6

VNTC

R7433R74

33

SYS_3V3

R63 22R63 22

USB_D-

USB_D+

C77

C77

1μF/10V

1μF/10V

C78

C78

C73

C73

10UF/6.3V/X5R

10UF/6.3V/X5R

10UF/6.3V/X5R

10UF/6.3V/X5R

R67 22R67 22

C75

I2C_SCL
I2C_SDA

C75

VNTC

C74

C74

0.1uF/16V/X7R

0.1uF/16V/X7R

ILIMT=48.48/Rlimt

Detect 5V_2.3A

R79 1KR79 1K

Detect 5V 2.3A adapter

SYS_3V3

R77

R77

47K

47K

R78 10KR78 10K

R83 39.2KΩ/1%R83 39.2KΩ/1%

R84 51K/1%R84 51K/1%

USB_5V

C94 0.1uF /16V/X7RC94 0.1uF/16V/X7R

LMV331TP-TR

LMV331TP-TR

4

OUT

5

V+

U10

U10

3

-IN

2

V-

1

+IN

USB_5V

USB_D+

R80 NC/10KR80 NC/10K

USB_D-

C81

C81

C83

C83

C82

C82

C84

C79

C79

C80

C80

0.1uF/16V/X7R

0.1uF/16V/X7R

0.1uF/16V/X7R

0.1uF/16V/X7R

10pF/50V

10pF/50V

C84

10pF/50V

10pF/50V

10pF/50V

10pF/50V

10pF/50V

10pF/50V

Circuit Diagram-Main Board

BAT_3V7

BAT_3V7

DC-DC BOOST FOR CHARGE OUT

C22 1uF /10V/X5RC22 1uF/10V/X5R

C27

C27

C26

C26

C280.1uF/16V/X7R C280.1uF/16V/X7R

22UF/6.3V/X5R

22UF/6.3V/X5R

22UF/6.3V/X5R

22UF/6.3V/X5R

R25

R25

0.1R

0.1R

C35

C35

22UF/6.3V/X5R

22UF/6.3V/X5R

PCM5121_MUTE

L1 1.5uH/10AL1 1.5uH/10A

R24 NC/10RR24 NC/10R

C29

C29

NC/10P

NC/10P

R31 1KR31 1K

100k

100k

DC-DC BOOST FOR AMP

CE2 220uF/6.3V+CE2 220uF/6.3V

C44

C44

+

22UF/6.3V/X5R

22UF/6.3V/X5R

Stand_by PW_EN

R37 1KR37 1K

C39

C39

C45

C45

C40

C40

22UF/6.3V/X5R

22UF/6.3V/X5R

0.1uF/16V/X7R

0.1uF/16V/X7R

1000pF/50V/X7R

1000pF/50V/X7R

C52

C52

R40

R40

100K

100K

0.1uF/16V/X7R

0.1uF/16V/X7R

R42 NC/47KR42 NC/47K

R45

R45

NC/47K

NC/47K

R33

R33

5

2

8

7

C37

C37

0.1uF/16V/X7R

0.1uF/16V/X7R

NC/1000pF/50V/X7R

NC/1000pF/50V/X7R

C218

C218

C54

C54

4.7UF/10V/X5R

4.7UF/10V/X5R

U4

LOB

IN

SVOUT

LX

PVOUT

SYV765AU4SYV765A

LBI

FB

EN

PGND3SGND

4

6

1

10

C24 4.7uF/6.3V/X5RC24 4.7uF/6.3V/X5R

R26 68kR26 68k

R29

R29

120k

120k

500KHz

9

Vout=1.2*(1+(R627+R641)/R628)=5.18V

L2 1.5uH/16AL2 1.5uH/16A

C195

C195

0.1uF/16V/X7R

0.1uF/16V/X7R

SS

C55

C55

0.1uF/16V/X7R

0.1uF/16V/X7R

R85 NC/2.2R85 NC/2.2

12

VIN

11

EN

10

MODE

2

VDD

3

SS

C38 0.1uF/25VC38 0.1uF/25V

1

13

SW

BST

U7

MP3431U7MP3431

AGND

PGND

6

7

600KHz

VOUT

COMP

R27 330kR27 330k

FB

ILIM

5V CHARGE OUT

1 DUT is powered off: Charge current is 2A
2 DUT is powered on: Charge current is 0.5A
(if 0.5A, iPad can’t show the charge icon)

USB5V_OUT

C33

C33

C32

C32

C31

C31

C300.1uF/16V/X7R C300.1uF/16V/X7R

22uF/10V/X5R

22uF/10V/X5R

22uF/10V/X5R

22uF/10V/X5R

NC/22uF/10V/X5R

NC/22uF/10V/X5R

Vout=1.0*(1+(R60+R62+R707)/R69)

R34

R34

750K/1%

750K/1%

R60+R62=750K

8

5

4
9

C57

C57

4.7nF

4.7nF

R441K/1% R441K/1%

R50

R50

18K

18K

C53

C53

22nF

22nF

R48

R48

6.8K

6.8K

R35

R35
NC-/0

NC-/0

R38 56K/1%R38 56K/1%

R43

R43

R317+R318=68.1K

180K/1%

180K/1%

R69+R707=182K

R47

R47

10K/1%

10K/1%

USB5V_OUT

C230.1uF/16V/X7R C230.1uF/16V/X7R

CE1100uF/16V+CE1100uF/16V

+

R55 1KR55 1K

Charge_Out_On

100k

100k

AMP_PVCC

C48

C48

C41

C41

C42

C42

C47

C47

22uF/25V/X5R

22uF/25V/X5R

100nF/25V/X5R

100nF/25V/X5R

1000pF/50V/X7R

1000pF/50V/X7R

DC_BIAS

R39 12K/1%R39 12K/1%

CE3 220uF/25V+CE3 220uF/25V

C43

C43

+

22uF/25V/X5R

22uF/25V/X5R

22uF/25V/X5R

22uF/25V/X5R

DC_BIAS

R21

R21
10k

10k

R56

R56

1
2
3
4
5
6
7
8

U5

U5

IN
DM_OUT
DP_OUT
ILIM_SEL
EN
CTL1
CTL2
CTL3

Charge_Out_2A

SLGC55546C

SLGC55546C

16

ILIM_HI

15

ILIM_LO

14

GND

13

FAULT

12

OUT

11

DM_IN

10

DP_IN

9

STATUS

PGND

17

AMP Switch

AMP_PVCC +PVCC

R17 10KR17 10K

R19 45.3K/1%R19 45.3K/1%

R22 45.3K/1%R22 45.3K/1%
R20 680KR20 680K

FAULT

Charge_Out_Status

R32

R32
10k

10k

NPN_3DG3904M

NPN_3DG3904M

R28 33R28 33
R30 33R30 33

TP3TP3

R36

R36

100K

100K

R411KR41

1K

SYS_3V3

C49

C49

100nF/25V/X5R

100nF/25V/X5R

Q5

Q5

R23 10kR23 10k

R18 100KR18 100K

Q4

Q4

NPN_3DG3904M

NPN_3DG3904M

UVW_`;

2013-10-21

Charge_Out_Status

U6

1

S

2

S

3

S

4

G

ME4435U6ME4435

C56

C56

R49

R49

0.1uF/16V/X7R

0.1uF/16V/X7R

100K

100K

USB5V_OUT

C25

C25

10uF/16V/X5R

10uF/16V/X5R

8

D

7

D

6

D

5

D

R46 10KR46 10K

C36

C36

0.1uF/16V/X7R

0.1uF/16V/X7R

TP4TP4

C50

C50

100nF/25V/X5R

100nF/25V/X5R

CHARGE_USB5V_OUT

USB_DN
USB_DP

C51

C51

100nF/25V/X5R

100nF/25V/X5R

TP5TP5

Stand_by

NC/1000pF/50V/X7R

NC/1000pF/50V/X7R

C219

C219

CE6 220uF/6.3V+CE6 220uF/6.3V

C59

C59

+

22UF/6.3V/X5R

22UF/6.3V/X5R

C62

C62

C63

C63

C60

C60

0.1uF/16V/X7R

0.1uF/16V/X7R

22UF/6.3V/X5R

22UF/6.3V/X5R

1000pF/50V/X7R

1000pF/50V/X7R

PW_EN

R51 NC/47KR51 NC/47K

C69

C69

R53

R53

NC/47K

NC/47K

4.7UF/10V/X5R

4.7UF/10V/X5R

L3 1.5uH/16AL3 1.5uH/16A

C211

C211

0.1uF/16V/X7R

0.1uF/16V/X7R

SS

C70

C70

0.1uF/16V/X7R

0.1uF/16V/X7R

R89 NC/2.2R89 NC/2.2

12

VIN

11

EN

10

MODE

2

VDD

3

SS

C58 0.1uF/25VC58 0.1uF/25V

13

1

SW

BST

U8

MP3431U8MP3431

AGND

PGND

6

7

VOUT

COMP

8

C66

C66

C65

C65

C64

5

FB

4
9

ILIM

C72

C72

4.7nF

4.7nF

R521K/1% R521K/1%

1000pF/50V/X7R

C71

C71

4.7nF

4.7nF

R54

R54

18K

18K

1000pF/50V/X7R

C64

100nF/25V/X5R

100nF/25V/X5R

C68

C68

C67

C67

22uF/25V/X5R

22uF/25V/X5R

22uF/25V/X5R

22uF/25V/X5R

22uF/25V/X5R

22uF/25V/X5R

Circuit Diagram-USB Board

USB_5V

Type C

XP1

XP1

A1

GND

A4

VBUS

A5

CC1

A6

D+

A7

D-

A8

SBU1

A9

VBUS

GND

VBUS
SBU2

CC2

VBUS

B12

USB_5V

B9
B8
B7

D-

B6

D+

B5
B4

USB_D-

USB_D+

USB_D­USB_D+

USB_5V

XP8

XP8
4PIN/2.00mm

4PIN/2.00mm

1

1

2

2

3

3

4

4

A12

USB_D­USB_D+

USBC_CC

GND

USBC_CC

GND1GND2GND3GND

4

;#

GND

1000PF

B1

Type C

Type C

XP9

XP9
4PIN/2.00mm

4PIN/2.00mm

1

1

2

2

3

3

4

4

Print-Layout-KEY&LED&CN600 Board(TOP)

Print-Layout-KEY&LED&CN600 Board(BOT)

Print-Layout-Main Board(TOP)

Print-Layout-Main Board(BOT)

Print-Layout-USB Board(TOP)

Print-Layout-USB Board(BOT)

MECHANICAL EXPLODED VIEW

Pos. No. P/N Description QTY

1,2,3,4,5,7,10 08-HARGE4-001 FABRIC GRILLE ASSY BLK 1
1,2,3,4,5,7,10 08-HARGE4-002 FABRIC GRILLE ASSY GRY 1
1,2,3,4,5,7,10 08-HARGE4-003 FABRIC GRILLE ASSY GRN 1
1,2,3,4,5,7,10 08-HARGE4-004 FABRIC GRILLE ASSY PINK 1
1,2,3,4,5,7,10 08-HARGE4-005 FABRIC GRILLE ASSY RED 1
1,2,3,4,5,7,10 08-HARGE4-006 FABRIC GRILLE ASSY SAND 1
1,2,3,4,5,7,10 08-HARGE4-007 FABRIC GRILLE ASSY TEAL 1
1,2,3,4,5,7,10 08-HARGE4-008 FABRIC GRILLE ASSY BLU 1
1,2,3,4,5,7,10 08-HARGE4-009 FABRIC GRILLE ASSY WHT 1
1,2,3,4,5,7,10 08-HARGE4-00X FABRIC GRILLE ASSY YEL 1
6 08-035030-03002 SPK DRIVE 53x93MM 1
8 49-367500-BAT6-A LI-ION BATTERY 7500mAh 3.6V 1
9 59-293300-000B1 RUBBER BUTTON BLK 1
9 59-293300-000B4 RUBBER BUTTON GRY 1
9 59-293300-000B7 RUBBER BUTTON GRN 1
9 59-293300-000B9 RUBBER BUTTON PINK 1
9 59-293300-000B3 RUBBER BUTTON RED 1
9 59-293300-000C1 RUBBER BUTTON SAND 1
9 59-217440-000B5 RUBBER BUTTON TEAL 1
9 59-293300-000B2 RUBBER BUTTON BLU 1
9 59-293300-000B6 RUBBER BUTTON WHT 1
9 59-293300-000B8 RUBBER BUTTON YEL 1
11 08-HARGE4-KY0 KEY BOARD 1
12 08-HARGE4-MA0 MAIN BOARD 1
13 08-HARGE4-ZT0 CABINET & MIC ASSY 1
14 54-NE0740-00012 PASSIVE RADIATOR RIGHT BLK 1
14 54-NE0740-00016 PASSIVE RADIATOR RIGHT GRY 1
14 54-NE0740-00008 PASSIVE RADIATOR RIGHT GRN 1
14 54-NE0740-00002 PASSIVE RADIATOR RIGHT PINK 1
14 54-NE0740-00014 PASSIVE RADIATOR RIGHT RED 1
14 54-NE0740-00018 PASSIVE RADIATOR RIGHT SAND 1
14 54-NE0740-00006 PASSIVE RADIATOR RIGHT TEAL 1
14 54-NE0740-00010 PASSIVE RADIATOR RIGHT BLU 1
14 54-NE0740-00020 PASSIVE RADIATOR RIGHT WHT 1
14 54-NE0740-00004 PASSIVE RADIATOR RIGHT YEL 1
15 55-HAR4R1-0UHB1 RIGHT END COVER BLK 1
15 55-HAR4R1-0UHB4 RIGHT END COVER GRY 1
15 55-HAR4R1-0UHB7 RIGHT END COVER GRN 1
15 55-HAR4R1-0UHB9 RIGHT END COVER PINK 1
15 55-HAR4R1-0UHB3 RIGHT END COVER RED 1
15 55-HAR4R1-0UHC1 RIGHT END COVER SAND 1
15 55-HAR4R1-0UHB5 RIGHT END COVER TEAL 1
15 55-HAR4R1-0UHB2 RIGHT END COVER BLU 1
15 55-HAR4R1-0UHB6 RIGHT END COVER WHT 1
15 55-HAR4R1-0UHB8 RIGHT END COVER YEL 1
16 59-293340-000 BATTERY COVER SEALING RUBBER 1
17 02-CHG4W1-XX0 BATTERY COVER ASSY 1
18 08-HARGE4-LE0 LED BOARD 1
21 02-CHG4W3-XX0B1 USB COVER BLK 1
21 02-CHG4W3-XX0B4 USB COVER GRY 1
21 02-CHG4W3-XX0B7 USB COVER GRN 1
21 02-CHG4W3-XX0B9 USB COVER PINK 1
21 02-CHG4W3-XX0B3 USB COVER RED 1
21 02-CHG4W3-XX0C1 USB COVER SAND 1
21 02-CHG4W3-XX0B5 USB COVER TEAL 1
21 02-CHG4W3-XX0B2 USB COVER BLU 1
21 02-CHG4W3-XX0B6 USB COVER WHT 1
21 02-CHG4W3-XX0B8 USB COVER YEL 1
22 02-CHG4B1-XX0B1 FOOT PAD BLK 1
22 02-CHG4B1-XX0B4 FOOT PAD GRY 1
22 02-CHG4B1-XX0B7 FOOT PAD GRN 1
22 02-CHG4B1-XX0B9 FOOT PAD PINK 1
22 02-CHG4B1-XX0B3 FOOT PAD RED 1
22 02-CHG4B1-XX0C1 FOOT PAD SAND 1
22 02-CHG4B1-XX0B5 FOOT PAD TEAL 1
22 02-CHG4B1-XX0B2 FOOT PAD BLU 1
22 02-CHG4B1-XX0B6 FOOT PAD WHT 1
22 02-CHG4B1-XX0B8 FOOT PAD YEL 1
23 08-HARGE4-CN0 CN BOARD 1
24 55-CHG4W2-0UHB1 SEAL COVER BLK 1
24 55-CHG4W2-0UHB4 SEAL COVER GRY 1
24 55-CHG4W2-0UHB7 SEAL COVER GRN 1
24 55-CHG4W2-0UHB9 SEAL COVER PINK 1
24 55-CHG4W2-0UHB3 SEAL COVER RED 1
24 55-CHG4W2-0UHC1 SEAL COVER SAND 1
24 55-CHG4W2-0UHB5 SEAL COVER TEAL 1
24 55-CHG4W2-0UHB2 SEAL COVER BLU 1
24 55-CHG4W2-0UHB6 SEAL COVER WHT 1
24 55-CHG4W2-0UHB8 SEAL COVER YEL 1
25 59-293330-000 TERMINAL SEALING RUBBER 1
26 54-NE0740-00011 PASSIVE RADIATOR LEFT BLK 1
26 54-NE0740-00015 PASSIVE RADIATOR LEFT GRY 1
26 54-NE0740-00007 PASSIVE RADIATOR LEFT GRN 1
26 54-NE0740-00001 PASSIVE RADIATOR LEFT PINK 1
26 54-NE0740-00013 PASSIVE RADIATOR LEFT RED 1
26 54-NE0740-00017 PASSIVE RADIATOR LEFT SAND 1
26 54-NE0740-00005 PASSIVE RADIATOR LEFT TEAL 1
26 54-NE0740-00009 PASSIVE RADIATOR LEFT BLU 1
26 54-NE0740-00019 PASSIVE RADIATOR LEFT WHT 1
26 54-NE0740-00003 PASSIVE RADIATOR LEFT YEL 1
27 55-HAR4L1-0UHB1 LEFT END COVER BLK 1
27 55-HAR4L1-0UHB4 LEFT END COVER GRY 1
27 55-HAR4L1-0UHB7 LEFT END COVER GRN 1
27 55-HAR4L1-0UHB9 LEFT END COVER PINK 1
27 55-HAR4L1-0UHB3 LEFT END COVER RED 1
27 55-HAR4L1-0UHC1 LEFT END COVER SAND 1
27 55-HAR4L1-0UHB5 LEFT END COVER TEAL 1
27 55-HAR4L1-0UHB2 LEFT END COVER BLU 1
27 55-HAR4L1-0UHB6 LEFT END COVER WHT 1
27 55-HAR4L1-0UHB8 LEFT END COVER YEL 1

29 59-293320-000 SPEAKER SEALING RING 1

PACKAGING EXPLODED VIEW





#$%

$$

+*,!-%

&'&()*!%

.,

JBL Charge 4 TL Spare Parts List v1.0

Pos. No. P/N Description QTY

1,2,3,4,5,7,10 08-HARGE4-001 FABRIC GRILLE ASSY BLK CHARGE4 TL 1
1,2,3,4,5,7,10 08-HARGE4-002 FABRIC GRILLE ASSY GRY CHARGE4 TL 1
1,2,3,4,5,7,10 08-HARGE4-003 FABRIC GRILLE ASSY GRN CHARGE4 TL 1
1,2,3,4,5,7,10 08-HARGE4-004 FABRIC GRILLE ASSY PINK CHARGE4 TL 1
1,2,3,4,5,7,10 08-HARGE4-005 FABRIC GRILLE ASSY RED CHARGE4 TL 1
1,2,3,4,5,7,10 08-HARGE4-006 FABRIC GRILLE ASSY SAND CHARGE4 TL 1
1,2,3,4,5,7,10 08-HARGE4-007 FABRIC GRILLE ASSY TEAL CHARGE4 TL 1
1,2,3,4,5,7,10 08-HARGE4-008 FABRIC GRILLE ASSY BLU CHARGE4 TL 1
1,2,3,4,5,7,10 08-HARGE4-009 FABRIC GRILLE ASSY WHT CHARGE4 TL 1
1,2,3,4,5,7,10 08-HARGE4-00X FABRIC GRILLE ASSY YEL CHARGE4 TL 1
6 08-035030-03002 SPK DRIVE 53x93MM CHARGE4 TL 1
8 49-367500-BAT6-A LI-ION BATTERY 7500mAh 3.6V CHARGE4 TL 1
9 59-293300-000B1 RUBBER BUTTON BLK CHARGE4 TL 1
9 59-293300-000B4 RUBBER BUTTON GRY CHARGE4 TL 1
9 59-293300-000B7 RUBBER BUTTON GRN CHARGE4 TL 1
9 59-293300-000B9 RUBBER BUTTON PINK CHARGE4 TL 1
9 59-293300-000B3 RUBBER BUTTON RED CHARGE4 TL 1
9 59-293300-000C1 RUBBER BUTTON SAND CHARGE4 TL 1
9 59-217440-000B5 RUBBER BUTTON TEAL CHARGE4 TL 1
9 59-293300-000B2 RUBBER BUTTON BLU CHARGE4 TL 1
9 59-293300-000B6 RUBBER BUTTON WHT CHARGE4 TL 1
9 59-293300-000B8 RUBBER BUTTON YEL CHARGE4 TL 1
11 08-HARGE4-KY0 KEY BOARD CHARGE4 TL 1
12 08-HARGE4-MA0 MAIN BOARD CHARGE4 TL 1
13 08-HARGE4-ZT0 CABINET & MIC ASSY CHARGE4 TL 1
14 54-NE0740-00012 PASSIVE RADIATOR RIGHT BLK CHARGE4 TL 1
14 54-NE0740-00016 PASSIVE RADIATOR RIGHT GRY CHARGE4 TL 1
14 54-NE0740-00008 PASSIVE RADIATOR RIGHT GRN CHARGE4 TL 1
14 54-NE0740-00002 PASSIVE RADIATOR RIGHT PINK CHARGE4 TL 1
14 54-NE0740-00014 PASSIVE RADIATOR RIGHT RED CHARGE4 TL 1
14 54-NE0740-00018 PASSIVE RADIATOR RIGHT SAND CHARGE4 TL 1
14 54-NE0740-00006 PASSIVE RADIATOR RIGHT TEAL CHARGE4 TL 1
14 54-NE0740-00010 PASSIVE RADIATOR RIGHT BLU CHARGE4 TL 1
14 54-NE0740-00020 PASSIVE RADIATOR RIGHT WHT CHARGE4 TL 1
14 54-NE0740-00004 PASSIVE RADIATOR RIGHT YEL CHARGE4 TL 1
15 55-HAR4R1-0UHB1 RIGHT END COVER BLK CHARGE4 TL 1
15 55-HAR4R1-0UHB4 RIGHT END COVER GRY CHARGE4 TL 1
15 55-HAR4R1-0UHB7 RIGHT END COVER GRN CHARGE4 TL 1
15 55-HAR4R1-0UHB9 RIGHT END COVER PINK CHARGE4 TL 1
15 55-HAR4R1-0UHB3 RIGHT END COVER RED CHARGE4 TL 1
15 55-HAR4R1-0UHC1 RIGHT END COVER SAND CHARGE4 TL 1
15 55-HAR4R1-0UHB5 RIGHT END COVER TEAL CHARGE4 TL 1
15 55-HAR4R1-0UHB2 RIGHT END COVER BLU CHARGE4 TL 1
15 55-HAR4R1-0UHB6 RIGHT END COVER WHT CHARGE4 TL 1
15 55-HAR4R1-0UHB8 RIGHT END COVER YEL CHARGE4 TL 1
16 59-293340-000 BATTERY COVER SEALING RUBBER 1
17 02-CHG4W1-XX0 BATTERY COVER ASSY CHARGE4 TL 1
18 08-HARGE4-LE0 LED BOARD CHARGE4 TL 1
21 02-CHG4W3-XX0B1 USB COVER BLK CHARGE4 TL 1
21 02-CHG4W3-XX0B4 USB COVER GRY CHARGE4 TL 1
21 02-CHG4W3-XX0B7 USB COVER GRN CHARGE4 TL 1
21 02-CHG4W3-XX0B9 USB COVER PINK CHARGE4 TL 1

21 02-CHG4W3-XX0B3 USB COVER RED CHARGE4 TL 1
21 02-CHG4W3-XX0C1 USB COVER SAND CHARGE4 TL 1
21 02-CHG4W3-XX0B5 USB COVER TEAL CHARGE4 TL 1
21 02-CHG4W3-XX0B2 USB COVER BLU CHARGE4 TL 1
21 02-CHG4W3-XX0B6 USB COVER WHT CHARGE4 TL 1
21 02-CHG4W3-XX0B8 USB COVER YEL CHARGE4 TL 1
22 02-CHG4B1-XX0B1 FOOT PAD BLK CHARGE4 TL 1
22 02-CHG4B1-XX0B4 FOOT PAD GRY CHARGE4 TL 1
22 02-CHG4B1-XX0B7 FOOT PAD GRN CHARGE4 TL 1
22 02-CHG4B1-XX0B9 FOOT PAD PINK CHARGE4 TL 1
22 02-CHG4B1-XX0B3 FOOT PAD RED CHARGE4 TL 1
22 02-CHG4B1-XX0C1 FOOT PAD SAND CHARGE4 TL 1
22 02-CHG4B1-XX0B5 FOOT PAD TEAL CHARGE4 TL 1
22 02-CHG4B1-XX0B2 FOOT PAD BLU CHARGE4 TL 1
22 02-CHG4B1-XX0B6 FOOT PAD WHT CHARGE4 TL 1
22 02-CHG4B1-XX0B8 FOOT PAD YEL CHARGE4 TL 1
23 08-HARGE4-CN0 CN BOARD CHARGE4 TL 1
24 55-CHG4W2-0UHB1 SEAL COVER BLK CHARGE4 TL 1
24 55-CHG4W2-0UHB4 SEAL COVER GRY CHARGE4 TL 1
24 55-CHG4W2-0UHB7 SEAL COVER GRN CHARGE4 TL 1
24 55-CHG4W2-0UHB9 SEAL COVER PINK CHARGE4 TL 1
24 55-CHG4W2-0UHB3 SEAL COVER RED CHARGE4 TL 1
24 55-CHG4W2-0UHC1 SEAL COVER SAND CHARGE4 TL 1
24 55-CHG4W2-0UHB5 SEAL COVER TEAL CHARGE4 TL 1
24 55-CHG4W2-0UHB2 SEAL COVER BLU CHARGE4 TL 1
24 55-CHG4W2-0UHB6 SEAL COVER WHT CHARGE4 TL 1
24 55-CHG4W2-0UHB8 SEAL COVER YEL CHARGE4 TL 1
25 59-293330-000 TERMINAL SEALING RUBBER 1
26 54-NE0740-00011 PASSIVE RADIATOR LEFT BLK CHARGE4 TL 1
26 54-NE0740-00015 PASSIVE RADIATOR LEFT GRY CHARGE4 TL 1
26 54-NE0740-00007 PASSIVE RADIATOR LEFT GRN CHARGE4 TL 1
26 54-NE0740-00001 PASSIVE RADIATOR LEFT PINK CHARGE4 TL 1
26 54-NE0740-00013 PASSIVE RADIATOR LEFT RED CHARGE4 TL 1
26 54-NE0740-00017 PASSIVE RADIATOR LEFT SAND CHARGE4 TL 1
26 54-NE0740-00005 PASSIVE RADIATOR LEFT TEAL CHARGE4 TL 1
26 54-NE0740-00009 PASSIVE RADIATOR LEFT BLU CHARGE4 TL 1
26 54-NE0740-00019 PASSIVE RADIATOR LEFT WHT CHARGE4 TL 1
26 54-NE0740-00003 PASSIVE RADIATOR LEFT YEL CHARGE4 TL 1
27 55-HAR4L1-0UHB1 LEFT END COVER BLK CHARGE4 TL 1
27 55-HAR4L1-0UHB4 LEFT END COVER GRY CHARGE4 TL 1
27 55-HAR4L1-0UHB7 LEFT END COVER GRN CHARGE4 TL 1
27 55-HAR4L1-0UHB9 LEFT END COVER PINK CHARGE4 TL 1
27 55-HAR4L1-0UHB3 LEFT END COVER RED CHARGE4 TL 1
27 55-HAR4L1-0UHC1 LEFT END COVER SAND CHARGE4 TL 1
27 55-HAR4L1-0UHB5 LEFT END COVER TEAL CHARGE4 TL 1
27 55-HAR4L1-0UHB2 LEFT END COVER BLU CHARGE4 TL 1
27 55-HAR4L1-0UHB6 LEFT END COVER WHT CHARGE4 TL 1
27 55-HAR4L1-0UHB8 LEFT END COVER YEL CHARGE4 TL 1
29
ESD2 13-ESDPSA-V053 IC ESDPSA0402V05 ESD PROTECTION 1
U1 13-ME6211-C333 IC ME6211C33M5G 1
U10 13-LMV331-TPT3 IC LMV331TP-TR 1
U101
U12 13-SD20TR-UTQ3 IC SD20/TR UTQFN-1.8×1.4-10L 1

59-293320-000 SPEAKER SEALING RING 1

07-BTM264-J011 BT MODULE JX264-01 CHARGE4 TL

1

U13 13-PCM512-1PW3 IC PCM5121PWR DAC 1
U14,U15 13-RS622X-QTS2 IC RS622XQ 1
U17 13-SLG4V4-8263 IC SLG4V4826 1
U18 13-AW9523-BTQ3 IC AW9523B TQFN4X4-24L control CHARGE4 TL 1
U19 13-TPA312-8D22 IC TPA3128D2 POWER AMP 1
U2,U3 13-ME6213-C333-A1 IC ME6213C33M5G 1
U4 13-SYV765-AQF3 IC SYV765A QFN2X2-10 DC-DC 1
U5 13-SLGC55-5463 IC SLGC55546C TQFN-16 USB POWER 1
U7,U8 13-MP3431-GLQ3 IC MP3431GL QFN13 POWER 1
U9 13-MP2624-GLQ3 IC MP2624GL QFN-22 POWER 1

47-ANT377-XX0 BT ANTENNA L120MM IPEX CHARGE4 TL 1
41-TC1200-UPAB USB CABLE CHARGE4 TL 1
46-FF016C-08BUF FFC 8P 0.5MM 160MM B tinned 60V CHARGE4TL 1
46-HH008C-32AUF FFC 32P 0.5MM 80MM A tinned 60V CHARGE4 TL 1
46-NF012C-12BUFS FFC 12P 0.5MM 120MM B tinned 60V CHARGE4 TL 1
76-293890-0ATD2 GIFT BOX BLK US CHARGE4 TL 1
76-293890-0ATD5 GIFT BOX GRY US CHARGE4 TL 1
76-293890-0ATD8 GIFT BOX GRN US CHARGE4 TL 1
76-293890-0ATE1 GIFT BOX PINK US CHARGE4 TL 1
76-293890-0ATD4 GIFT BOX RED US CHARGE4 TL 1
76-293890-0ATE2 GIFT BOX SAND US CHARGE4 TL 1
76-293890-0ATD6 GIFT BOX TEAL US CHARGE4 TL 1
76-293890-0ATD3 GIFT BOX BLU US CHARGE4 TL 1
76-293890-0ATD7 GIFT BOX WHT US CHARGE4 TL 1
76-293890-0ATD9 GIFT BOX YEL US CHARGE4 TL 1
76-293890-0ATC5 GIFT BOX BLK CN/GLOBAL CHARGE4 TL 1
76-293890-0ATC8 GIFT BOX GRY CN/GLOBAL CHARGE4 TL 1
76-293890-0ATB7 GIFT BOX GRN CN/GLOBAL CHARGE4 TL 1
76-293890-0ATC9 GIFT BOX PINK CN/GLOBAL CHARGE4 TL 1
76-293890-0ATC7 GIFT BOX RED CN/GLOBAL CHARGE4 TL 1
76-293890-0ATC1 GIFT BOX SAND CN/GLOBAL CHARGE4 TL 1
76-293890-0ATB5 GIFT BOX TEAL CN/GLOBAL CHARGE4 TL 1
76-293890-0ATB2 GIFT BOX BLU CN/GLOBAL CHARGE4 TL 1
76-293890-0ATD1 GIFT BOX WHT CN/GLOBAL CHARGE4 TL 1
76-293890-0ATB8 GIFT BOX YEL CN/GLOBAL CHARGE4 TL 1

Revision List

Version 1.0

*Initial release for JBL Charge4. 2018-08

Version 1.1

*Add missing part - Speaker Sealing Ring in mechanical exploded view. 2018-08

Version 1.2

*BT Module P/N updated. 2018-09