JBL ASB6118 User Manual
High Power
Key Features:
u
1 x 18” 2242H SVG™ Driver.
u
Large vent area for high output with
low distortion.
u
Arrays with various AE Series mid-high
frequency 2-way models
(see AE Series Array Guide).
Applications:
u
Performing arts facilities
u
Theatrical sound design
u
Auditoriums
u
Houses of worship
u
Live clubs
u
Dance-clubs/discotheques
u
Sports facilities
u
Themed entertainment venues
ASB6118 is a high power subwoofer
system comprised of one 460 mm
(18 in) SVG Super Vented Gap low
frequency driver in a vented, front-loaded
configuratio n for extended bandwidth.
The rectangular cabinet is fitted with
M10 threaded suspension points. Preengineered array bracketry is available.
ASB6118 is part of JBL’s AE
Application Engineered Series, a versatil e
family of loudspeakers for a wide variety
of applications.
ASB6118
Single 18” Subwoofer
Specifications:
System:
Frequency Range (-10 dB): 28 Hz – 1 kHz
Frequency Response (±3 dB): 35 Hz – 1 kHz
Transducer Power Rating (AES)1: 1200 W (4800 W peak), 2 hrs
Long-Term System Power Rating2: 800 W (3200 W peak), 100 hrs
Maximum SPL3: 30 Hz – 100 Hz: 129 dB-SPL cont avg (135 dB peak)
100 Hz – 500 Hz: 129 dB-SPL cont avg (135 dB peak)
System Sensitivity (dB-SPL, 1W @ 1m)4: 30 Hz – 100 Hz: 98 dB
100 Hz – 500 Hz: 98 dB
Nominal Impedance: 8 ohms
Transducers:
Low Frequency Driver: 1 x JBL 2242H 460 mm (18 in) SVG™ driver with 100 mm (4 in)
voice coil
Physical:
Enclosure: Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply Finnish
birch plywood
Suspension Attachment: 12 points (3 top, 3 bottom, 2 each side, 2 rear), M10 threaded hardware
Finish: Black DuraFlex™ finish. White available upon request.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent
black foam backing.
Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip
terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or
max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier
strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in 548 x 561 x 816 mm
vertical cabinet orientation): (21.6 x 22.1 x 32.2 in)
Net Weight: 44.5 kg (98 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers.
1
AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES 2 hr rating plus
long-term 100 hr rating are specified for low-frequency transducers.
2
AES standard, one decade pink noise with 6 dB crest factor, in cabinet, long-term 100 hr rating.
3
Calculated based on power rating and sensitivity, exclusive of power compression.
4
Half-space (2π) loading, averaged in specified frequency band.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an
expression of that philosophy.
Optional planar array frame kit. See AE Series Bracket Guide
u ASB6118 High Power Single 18” Subwoofer
Frequency response is measured on-axis at a distance referenced to 1 m @ 1 watt (2.83 Vrms) input,
shown as half-space (2π, solid line) and full-space (4π, dotted line) environment.
Electrical Input Impedance
Dimensions in mm (in).
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
A Harman International Company
© Copyright 2016 JBL Professional
SS ASB6118
CRP 10M
8/16
Loading...