Jbl JSR 400, ARCSAT, ARCCINEMAII User Manual
ARC CinemaII simple setup guide
thank you for choosing JBL.
For more than 50 years, JBL has been
involved in every aspect of music and
film recording and reproduction, from
live performances to monitoring the
recordings you play in your home, car
or office.
We’re confident that the JBL
Loudspeakers you have chosen will
provide every note of enjoyment that
you expected – and that when you
think about purchasing additional audio
equipment for your home, car or office,
you will once again choose JBL.
Please take a moment to complete the
enclosed profile card. It enables us to
keep you posted on our latest advance-
ments, and helps us to better under-
stand our customers and build products
that meet their needs and expectations.
JBL Consumer Products
read first! Important Safety Precautions!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To prevent electric shock,
do not remove the grounding plug
on the power cord, or use any plug
or extension cord that does not have
a grounding plug provided.
Make certain that the
AC outlet is properly grounded.
Do not use an adapter plug
with this product.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
Antenna Lead-In Wire
Ground Clamp
Antenna Discharge Unit (NEC Section 810-20)
Grounding Conductors (NEC Section 810-21)
Electric Service Equipment
Ground Clamps
Power Service Grounding Electrode System
(NEC Art 250, Part H)
1. Read Instructions. All the
safety and operating instructions should be read before
the product is operated.
2. Retain Instructions. The
safety and operating instructions should be retained for
future reference.
3. Heed Warnings. All warnings on the product and in the
operating instructions should
be adhered to.
4. Follow Instructions. All
operating and use instructions
should be followed.
5. Cleaning. Unplug this product from the wall outlet before
cleaning. Do not use liquid
cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
6. Attachments. Do not use
attachments not recommended
by the product manufacturer,
as they may cause hazards.
7. Water and Moisture. Do
not use this product near
water – for example, near a
bathtub, wash bowl, kitchen
sink or laundry tub; in a wet
basement; or near a swimming
pool; and the like.
8. Accessories. Do not place
this product on an unstable
cart, stand, tripod, bracket or
table. The product may fall,
causing serious injury to a
child or adult, and serious
damage to the product. Use
only with a cart, stand, tripod,
bracket or table recommended
by the manufacturer, or sold
with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a
mounting accessory
recommended by the
manufacturer.
9. A Product and Cart
Combination Should Be
Moved with Care. Quick stops,
excessive force and uneven
surfaces may cause the product and cart combination to
overturn.
10. Ventilation. Slots and
openings in the cabinet are
provided for ventilation and to
ensure reliable operation of
the product and to protect it
from overheating, and these
openings must not be blocked
or covered. The openings
should never be blocked by
placing the product on a bed,
sofa, rug or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or
rack unless proper ventilation
is provided or the manufacturer’s instructions have been
adhered to.
11. Power Sources. This product should be operated only
from the type of power source
indicated on the marking
label. If you are not sure
of the type of power supply
to your home, consult your
product dealer or local power
company.
For products intended
to operate from battery power,
or other sources, refer to the
operating instructions.
12. Grounding or
Polarization. This product may
be equipped with a polarized
alternating-current line plug
(a plug having one blade wider
than the other). This plug will
fit into the power outlet only
one way. This is a safety feature. If you are unable to
insert the plug fully into the
outlet, try reversing the plug.
If the plug should still fail to
fit, contact your electrician to
replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
13. Power-Cord Protection.
Power-supply cords should be
routed so that they are not
likely to be walked on or
pinched by items placed upon
or against them, paying particular attention to cords at
plugs, convenience receptacles
and the point where they exit
from the product.
14. Nonuse Periods. The
power cord of the product
should be unplugged from the
outlet when left unused for
long periods of time.
15. Outdoor Antenna
Grounding. If an outside
antenna or cable system is
connected to the product, be
sure the antenna or cable system is grounded so as to provide some protection against
voltage surges and built-up
static charges. Article 810 of
the National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper
grounding of the mast and
– 2 –
supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of
grounding conductors, location
of antenna-discharge unit,
connection to grounding electrodes and requirements for
the grounding electrode. See
Figure 1.
16. Lightning. For added protection for this product during
a lightning storm, or when
it is left unattended and
unused for long periods of
time, unplug it from the wall
outlet and disconnect the
antenna or cable system. This
will prevent damage to the
product due to lightning and
power-line surges.
17. Power Lines. An outside
antenna system should not be
located in the vicinity of
overhead power lines or other
electric light or power circuits,
or where it can fall into such
power lines or circuits. When
installing an outside antenna
system, extreme care should
be taken to keep from touching
such power lines or circuits, as
contact with them might be
fatal.
18. Overloading. Do not overload wall outlets, extension
cords or integral convenience
receptacles, as this can result
in a risk of fire or electric
shock.
19. Object and Liquid Entry.
Never push objects of any kind
into this product through
openings, as they may touch
dangerous voltage points or
short-out parts that could
result in a fire or electric
shock. Never spill liquid of
any kind on the product.
20. Servicing. Do not attempt
to service this product your-
self, as opening or removing
covers may expose you to
dangerous voltage or other
hazards. Refer all servicing to
qualified service personnel.
21. Damage Requiring
Service. Unplug this product
from the wall outlet and refer
servicing to qualified service
personnel under the following
conditions:
a. The power-supply cord or
the plug has been damaged; or
b. Objects have fallen onto, or
liquid has been spilled into,
the product; or
c. The product has been
exposed to rain or water; or
d. The product does not operate normally when following
the operating instructions.
Adjust only those controls that
are covered by the operating
instructions, as an improper
adjustment of other controls
may result in damage and will
often require extensive work
by a qualified technician to
restore the product to its
normal operation; or
e. The product has been
dropped or damaged in any
way; or
f. The product exhibits a distinct change in performance –
this indicates a need for
service.
Figure 1.
Example of Antenna Grounding
as per National Electrical Code,
ANSI/NFPA 70
22. Replacement Parts. When
replacement parts are required,
be sure the service technician
has used replacement parts
specified by the manufacturer
or that have the same characteristics as the original part.
Unauthorized substitutions
may result in fire, electric
shock or other hazards.
23. Safety Check. Upon
completion of any service or
repairs to this product, ask the
service technician to perform
safety checks to determine
that the product is in proper
operating condition.
24. Wall or Ceiling Mounting.
The product should be
mounted to a wall or ceiling
only as recommended by the
manufacturer.
25. Heat. The product should
be situated away from heat
sources such as radiators, heat
registers, stoves, or other
products (including amplifiers)
that produce heat.
Part No. JBLULB 6/96
included with this system
PRO LOGIC 3 STEREO HALL
POWER (STANDBY)
SPEAKERS
HEADPHONES
CENTER
MODE
TEST
TONE
BYPASS FM/AM CD TAPE VCR1 VCR2
TUNING
UP
DOWN
AUTO
VOLUME
BASSBALANCE TREBLE
MIN MAXMIN MAXL R
AUX/TV
VIDEO L – AUDIO – R
VIDEO 2
Power
Tuner
TunerAUX/TVTAPECD
MuteSleepVCR2VCR1
Pro Logic3-StereoHall
BypassCent ModeDelay
VolumeCenter Level
Rear Level
Surround
Test Tone
Auto
Memory
FM/AMP.Scan
Tuning
123
546
980
7
RED TAG
5'
BLACK TAG
9'
WHITE TAG
28'
{
{
{
{
{
{
CENTER
FRONT REAR
Dolby* Pro Logic* receiver.
Front, center and surround speakers.
Speaker and audio cables.
Powered subwoofer.
Remote control with batteries.
– 3 –
5 – 6 ft.
one. Speaker Placement
0-2 ft.
Satellites
Mounting Options
Front
On shelves.
On the wall. No bracket; uses
built-in keyhole.
Subwoofer
On optional stands.
Part No. FS10/20.
Surround Speakers
To rotate the logo when
placing speakers horizontally,
pull out gently and turn.
Surrounds
On shelves.
On the wall. No bracket; uses
built-in keyhole.
On optional stands.
Part No. FS10/20.
– 4 –
two. Speaker Connections
AVIS: RISQUE DE CHOC
ELECTRIQUE-NE PAS OUVRIR.
WARNING: “TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK.
DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.”
AVERTISSEMENT: “AFIN D’ÉVITER LES DANGERS
D’INCENDIE ET D’ÉLECTROCUTION,
NE PAS EXPOSER CET APPAREIL
À LA PLUIE NI À L’HUMIDITE.”
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions. (1) This device may not cause harmful interference and (2) this device
must accept any interference received including interference that may cause undesired
operation.
Manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY,” the
double-D symbol and “PRO LOGIC” are trademarks of Dolby Laboratories Licensing
Corporation.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
120V/60Hz
VIDEO
MAIN SPEAKER (8Ω)
CENTER
SPEAKER (8Ω)
REAR SPEAKER (8Ω)
IN
MONITOR
OUTOUT
VCR
AUX CD TAPE
ANTENNA
AUDIO
VCR
SUBWOOFER
IN IN IN OUT IN OUT
L
R
BAL
300Ω
UNBAL
75Ω
GND
AM
LOOP
FM
+ R –
+ R – – L +
– L +
– +
– ++ – – +
+ –
– +
Front Right Speaker Front Left Speaker
Rear
Right Speaker
Rear
Left Speaker
Center Speaker
Subwoofer
Input
L
R
+ –
Back of Speaker
Make sure you match
RED to RED and BLACK
to BLACK on both ends.
Red Black
– 5 –
Loading...