High Power 3-Way Loudspeaker
with 1 x 15” LF Driver &
AM7315/64
Professional Series
Key Features:
u
60° x 40° Coverage, rotatable for use in
either vertical or horizontal orientation.
u
2265H Differential Drive
Frequency Driver
u
CMCD™ Cone Midrange Compression
Driver provides low midrange distortion ,
increased sensitivity, extended bandwidth
and improved phase coherency.
u
2432H High-Frequency Compression
Driver
u
PT™ Progressive Transition Waveguide
for excellent pattern control with low
distortion.
u
Bi-Amp/Tri-Amp Switchable.
u
Optional planar array frame kit
(see AE Series Array Guide).
Applications:
u
Performing arts facilities
u
Theatrical sound design
u
Auditoriums
u
Houses of worship
u
Live clubs
u
Dance-clubs/discotheques
u
Sports facilities
u
Themed entertainment venues
AM7315/64 is a high power 3-way
full-range loudspeaker system comprise d
of one 380 mm (15 in) Differential
Drive® low frequenc y driver, one 200
mm (8 in) CMCD Cone Midrange
Compression Driver, and one 38 mm
(1.5 in) exit/75 mm (3 in) voice-coil HF
compression driver. The multi-band PT
Progressive Transition mid-high frequency
waveguide provide s well-controlled 60°
by 40° coverage and is rotatable for
cabinet positioning in either horizontal or
vertica l orientation. High-slope crossovers
minimize band overlap and well-controlled
off-axis response enhances arrayability.
The cabinet is fitted with M10 threade d
suspension points. Pre-engineere d array
bracketry is available.
AM7315/64 is part of JBL’s AE
Application Engineered Series, a versatil e
family of loudspeakers for a wide variety of
fixed installation application s.
®
Low-
Rotatable Horn
Specifications:
System:
Frequency Range1 (-10 dB): 38 Hz – 20 kHz
Frequency Response1 (±3 dB): 45 Hz – 18 kHz
Coverage Pattern: 60° x 40°, rotatable waveguide
Directivity Factor (Q): 20
Directivity Index (DI): 13 dB
Crossover Modes: Tri-amp/Bi-amp switchable
Crossover Frequencies2: 300 Hz and 2.3 kHz
Transducer Power Rating (AES)3: LF: 1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC)4: LF: 600 W (2400 W peak), 100 hrs
Maximum SPL5: LF: 127 dB-SPL cont avg (133 dB peak)
System Sensitivity of Passive Sections6 (1W @ 1m): MF/HF Section in Bi-amp mode: 108 dB SPL
Transducers:
Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in ) Differential Drive® driver with 75 mm (3 in) dual
Nominal Impedance: 8 ohms
Sensitivity6 (1W @ 1m): 97 dB SPL
Midrange Driver: JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm
Nominal Impedance: 8 ohms
Sensitivity6 (1W @ 1m): 108 dB SPL
High Frequency Driver: JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Nominal Impedance: 8 ohms
Sensitivity6 (1W @ 1m): 115 dB SPL
Waveguide: PT-K64MH
Physical:
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade
Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish: Black DuraFlex™ finish. White available upon request.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam
Input Connector: NL8 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical cabinet orientation): 967 x 561 x 657 mm (38.1 x 22.1 x 25.9 in)
Net Weight: 45.8 kg (101 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers
1
Bi-amp mode, with recommended active tuning.
2
Resultant engineered acoustical response of crossover network and components.
3
AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES 2 hr rating plus long-term
100 hr rating are specified for low-frequency transducers.
4
IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hrs, with recommended active bi-amp tuning.
5
Calculated based on power rating and sensitivity, exclusive of power compression.
6
Anechoic sensitivity in free field, no additional sensitivity gain from boundary loading.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an expression
of that philosophy.
750 W (3000 W peak), 100 hrs
MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs
MF/HF: 200 W (800 W peak), 100 hrs
Tri-amp mode:
MF: 133 dB-SPL cont avg (139 dB peak)
HF: 135 dB-SPL cont avg (141 dB peak)
Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
voice coil
(8 in) diameter Differential Drive® dual voice coil interna l driver
11-ply Finnish birch plywood
backing.
terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in)
spade lugs. Speakon in parallel with barrier strip for loop-through.
Optional planar array frame kit. See AE Series Bracket Guide.
u AM7315/64 High Power 3-Way Loudspeaker with 1 x 15” LF Driver & Rotatable Horn
360
-6 dB Beamwidth (degrees
Beamwidth
)
100
Horizontal
Vertical
10
20 100 1000 10000 20000
Frequency (Hz)
Directivity Index, Q
10
Directivity Index (DI), dB
0
20 100 1000 10000 20000
Frequency (Hz)
10
1
Dimensions
Dimensions in mm (in)
For more detailed dimensional information, refer to Application Data Sheet.
For AE & AE Compact Series WRC and WRX versions please visit the JBL Pro website at
http://www.jblpro.com/www/products/installed-sound/ae-series#.V63kVfkrLIV
to download Drawings.
Frequency Response and Impedance
95
85
SPL (dB)
75
65
20 100 1000 10000 20000
2π half-space
4π free field
Frequency (Hz)
Horizontal Off-Axis Frequency Response
0
-10
Attenuation (dB)
-20
Directivity Factor (Q)
-30
20 100 1000 10000 20000
Frequency (Hz)
Vertical Up Off-Axis Frequency Response
0
-10
-20
100
31.6
Ohms
10
3.16
0 deg
10 deg
20 deg
30 deg
40 deg
50 deg
60 deg
70 deg
80 deg
0 deg
10 deg
20 deg
30 deg
40 deg
-30
20 100 1000 10000 20000
Frequency (Hz)
Vertical Down Off-Axis Frequency Response
0
-10
Attenuation (dB)
-20
-30
20 100 1000 10000 20000
Measurements obtained in biamplified crossover mode with recommended active
tuning. Graphs are from unaltered measured data.
Frequency (Hz)
0 deg
10 deg
20 deg
30 deg
40 deg