JBL AM7212 User Manual

High Power 2-Way Loudspeaker

AM7212/00

Professional Series

Key Features:

100° x 100° Coverage

2262H Differential Drive

Driver

2432H High-Frequency Compression Driver

Large PT™ Progressive Transition

waveguide for excellent pattern control and low distortion

Rotatable waveguide for vertical or

horizontal orientation

Bi-Amp/Passive Switchable

Available in Black, White and WRC/WRX

finishes

Applications:

Performing Arts Facilities

Theatrical Sound Design

Auditoriums

Worship Facilities

Live Clubs

Dance Clubs

Sports Facilities

Themed Entertainment Venues

The AM7212/00 is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 2262H 300mm (12 in) low-frequency driver and 2432H high-frequency 38 mm (1.5 in) exit, 75mm (3 in) voice-coil compression driver. The large format Progressive Transition waveguide provides excellent 100° x 100° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled offaxis response enhances arrayability.

The enclosure is constructed of multi-ply birch coated in JBL’s rugged DuraFlex™ finish and is heavily braced to maximize low-frequency performance. The trapezoid enclosure is fitted with fifteen M10 threaded attachment points and utilizes a 14-gauge steel grille internally lined with acoustically transparent foam to provide additional driver protection and give a very professional appearance.

The AM7212/00 is part of JBL’s AESeries, a versatile family of loudspeakers intended for a wide variety of applications.

Low-Frequency

with 1 x 2” LF

Specifications:

System:

Frequency Range1 (-10 dB): 36 Hz – 20 kHz

Frequency Response1 (±3 dB): 42 Hz – 20 kHz

Coverage Pattern: 100° x 100°

Directivity Factor (Q): 8.3

Directivity Index (DI): 9.1 dB

Crossover Modes: Bi-amp/Passive switchable

Passive Crossover Frequency2: 1.5 kHz

Transducer Power Rating (AES)3: LF: 1000 W (4000 W peak), 2 hrs

Long-Term System Power Rating (IEC)4: Passive mode: 600 W (2400 W peak), 100 hrs

Maximum SPL (dB-SPL, 1W @ 1m)5: Bi-amp mode:

System Sensitivity6 (1W @ 1m): Passive mode: 95 dB SPL

Transducers:

Low Frequency Driver: 1 x JBL 2262H 300 mm (12 in) Differential Drive® driver with 75 mm

Nominal Impedance: 8 ohms

Sensitivity6 (1W @ 1m, within 96 dB SPL operational band):

High Frequency Driver:

Nominal Impedance: 8 ohms

Sensitivity (1W @ 1m): 111 dB SPL

Waveguide: PT-H1010HF-1

Physical:

Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade

Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware

Finish: Black DuraFlex™ finish. White available upon request.

Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black

Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals.

Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in 711 x 369 x 458 mm vertical cabinet orientation): (28.0 x 14.5 x 18.0 in)

Net Weight: 23.1 kg (51 lb)

Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers

Bi-amp mode, with recommended active tuning.

Resultant engineered acoustical response of crossover network and components.

AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES 2 hr rating plus

long-term 100 hr rating are specified for low-frequency transducers.

IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.

Calculated based on power rating and sensitivity, exclusive of power compression.

In free field with no sensitivity gain from boundary loading.

JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an expression of that philosophy.

700 W (2800 W peak), 100 hrs HF: 100 W (400 W peak), 2 hrs

LF: 126 dB-SPL cont avg (132 dB peak) HF: 131 dB-SPL cont avg (137 dB peak) Passive mode: 123 dB-SPL cont avg (129 dB peak)

(3 in) dual voice coil

JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

11-ply Finnish birch plywood

foam backing.

Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

U-Bracket MTU-3

u AM7212/00 High Power 2-Way Loudspeaker with 1 x 12” LF

360

-6 dB Beamwidth (degrees)

100

100 316

Attenuation (dB)

Beamwidth

100

Horizontal

Vertical

20 100 1000 1000020000

Frequency (Hz)

Directivity Index, Q

Directivity Index (DI), dB

20 100 1000 1000020000

Frequency (Hz)

Directivity Factor (Q)

Dimensions

Dimensions in mm (in)

For more detailed dimensional information, refer to Application Data Sheet.

For AE & AE Compact Series WRC and WRX versions please visit the JBL Pro website at http://www.jblpro.com/www/products/installed-sound/ae-series#.V63kVfkrLIV to download Drawings.

Frequency Response and Impedance

SPL (dB)

20 100 1000 10000 20000

Horizontal Off-Axis Frequency Response

-10

Attenuation (dB)

-20

-30 20 100 1000 1000020000

Frequency (Hz)

2π half-space

4π free field

Vertical Up Off-Axis Frequency Response

-10

-20

100

31.6

Ohms

3.16

0 deg

10 deg

20 deg

30 deg

40 deg

50 deg

60 deg

70 deg

80 deg

0 deg

10 deg

20 deg

30 deg

40 deg

10.0

[252]

R30.0

[202]

[R763]

18.0

[458]

C L

SIDES

18.0

12.0 [458]

[305]

8.0

30°

TOP

14.5

[369]

28.0

[711]

FRONT

14.5

[369]

9.8

[249]

1.6

[42]

BOTTOM

[253]

[356]

-30 20 100 1000 1000020000

Frequency (Hz)

Vertical Down Off-Axis Frequency Response

-10

Attenuation (dB)

9.9

14.0

REAR

-20

-30 20 100 1000 1000020000

Measurements obtained in full passive crossover mode with no signal processing. Graphs are from unaltered measured data.

14.0

[356]

6X 1.6

[41]

Frequency (Hz)

0 deg

10 deg

20 deg

30 deg

40 deg

+ 2 hidden pages