JBL AM7200 User Manual

High Power Mid-High Frequency

AM7200/64

Professional Series

Key Features:

u

60° x 40° Coverage, rotatable for use in

either vertical or horizontal orientation.

u

CMCD™ Cone Midrange Compression

Driver provides low midrange distortion ,
increased sensitivity, extended bandwidth
and improved phase coherency.

u

2432H High-Frequency Compression Driver

u

PT™ Progressive Transition Waveguide for

excellent pattern control with low distortion.

u

Bi-Amp/Passive Switchable.

u

Optional planar array frame kits

(see AE Series Array Guide).

Applications:

Use with LF and/or subwoofer reinforcement
in applications such as:

u

Performing arts facilities

u

Theatrical sound design

u

Auditoriums

u

Houses of worship

u

Live clubs

u

Dance-clubs/discotheques

u

Sports facilities

u

Themed entertainment venues

Use without LF or subwoofer
reinforcement in:

u

Voice-only PA

u

Delay fill applications

AM7200/64 is a high power mid-high
frequency loudspeaker system comprise d of
one 200 mm (8 in) CMCD Cone Midrange
Compression Driver and one 38 mm
(1.5 in) exit/75 mm (3 in) voice-coil HF
compression driver. The multi-band PT
Progressive Transition mid-high frequency
waveguide provide s well-controlled 60° by
40° coverage and is rotatable for cabinet
positioning in either horizontal or vertical
orientation. High-slope crossovers minimize
band overlap and well-controlled off-axis
response enhances arrayability.

The cabinet is fitted with M10 threaded
suspension points. Pre-engineere d array
bracketry is available.

AM7200/64 is part of JBL’s AE
Application Engineered Series, a versatile
family of loudspeakers for a wide variety of
fixed installation application s.

Loudspeaker with Rotatable Horn

Specifications:

System:
Frequency Range1 (-10 dB): 260 Hz – 20 kHz
Frequency Response1 (±3 dB): 330 Hz – 18 kHz
Coverage Pattern: 60° x 40°, rotatable waveguide
Directivity Factor (Q): 20
Directivity Index (DI): 13 dB
Crossover Modes: Bi-amp/Passive switchable
Crossover Frequency2: 2.3 kHz
Transducer Power Rating (AES)3: MF: 350 W (1400 W peak), 2 hrs

HF: 100 W (400 W peak), 2 hrs
Long-Term System Power Rating (IEC)4: MF/HF: 200 W (800 W peak), 100 hrs
Maximum SPL5: Bi-amp mode:

MF: 133 dB-SPL cont avg (139 dB peak)
HF: 135 dB-SPL cont avg (141 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)

System Sensitivity (1W @ 1m): Passive mode: 108 dB SPL
Transducers:
Midrange Driver: JBL CMCD-82H Cone Midrange Compression Driver with integral 200

Nominal Impedance: 8 ohms
Sensitivity (1W @ 1m): 108 dB SPL
High Frequency Driver: JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in)

Nominal Impedance: 8 ohms
Sensitivity (1W @ 1m): 115 dB SPL
Waveguide: PT-K64MH
Physical:
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade

Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish: Black DuraFlex™ finish. White available upon request.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent

Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip

Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical 548 x 561 x 657 mm

cabinet orientation): (21.6 x 22.1 x 25.9 in)
Net Weight: 27.2 kg (60 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers

1

Passive mode, with recommended active tuning.

2

Resultant engineered acoustical response of crossover network and components.

3

AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air, long-term 100 hr rating.

4

IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours, with recommended active tuning.

5

Calculated based on power rating and sensitivity, exclusive of power compression.

JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an
expression of that philosophy.

mm (8 in) diameter Differential Drive® dual voice-coil interna l driver

voice coil

11-ply Finnish birch plywood

black foam backing.

terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or
max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier
strip for loop-through.

Optional planar array frame kit. See AE Series Bracket Guide.

u AM7200/64 High Power Mid-High Frequency Loudspeaker with Rotatable Horn

360

-6 dB Beamwidth (degrees

20

100

105 316

10

10

10

Attenuation (dB)

Beamwidth

)

100

Horizontal

Vertical

10

20 100 1000 10000 20000

Frequency (Hz)

Directivity Index, Q

10

Directivity Index (DI), dB

0

20 100 1000 10000 20000

Frequency (Hz)

10

1

Dimensions

Dimensions in mm (in)

For more detailed dimensional information, refer to Application Data Sheet.

For AE & AE Compact Series WRC and WRX versions please visit the JBL Pro website at
http://www.jblpro.com/www/products/installed-sound/ae-series#.V63kVfkrLIV
to download Drawings.

Frequency Response and Impedance

95

85

SPL (dB)

75

65

20 100 1000 10000 20000

Frequency (Hz)

Horizontal Off-Axis Frequency Response

0

-10

Attenuation (dB)

-20

Directivity Factor (Q)

-30
20 100 1000 10000 20000

Frequency (Hz)

Vertical Up Off-Axis Frequency Response

0

-10

-20

100

31.6

Ohms

10

3.16

0 deg

10 deg

20 deg

30 deg

40 deg

50 deg

60 deg

70 deg

80 deg

0 deg

10 deg

20 deg

30 deg

40 deg

-30
20 100 1000 10000 20000

Frequency (Hz)

Vertical Down Off-Axis Frequency Response

0

-10

Attenuation (dB)

-20

-30
20 100 1000 10000 20000

Measurements obtained in full passive crossover mode with recommended active
tuning. Graphs are from unaltered measured data.

Frequency (Hz)

0 deg

10 deg

20 deg

30 deg

40 deg