JBL Incorporated, 8500 Balboa Boulevard, P.O.Box 2200, Northridge, California 91329 U.S.A.
JBL 6208 REV E
PACKAGE
WIRING DIAGRAM
08-03
Technical Manual
JBL 6208
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance: 10K Line Level
• Frequency Range: 45 Hz to 20 kHz (–10 dB)
• Sensitivity: +4/–10 dBV (1.23V/0.25V)
• Crossover Frequencies: 2.6 kHz
SYSTEM COMPONENTS:
• Cabinet: C6208
• Grille: (330867-001)
• Low Frequency 200mm (8 in.) Cone
Transducer: Transducer 508G-3S (73284-01X)
• DC Resistance: 5.9 ohm ±5% Copper Wire
• High Frequency 25mm (1 in.) Gold Titanium/Hybrid
Transducer: Dome 031TiS-1 (330862-001)
• DC Resistance: 3.5 ohm to 4.2 ohm Copper Wire
SYSTEM COMPONENTS: (cont’d)
• Power Amp: (See Page 2)
AURAL SWEEP TEST SPECIFICATIONS:
A. L.F. Aural Sweep Test: 4.0V Input, 20 Hz to 1.2 kHz
B. H.F. Aural Sweep Test: 2.0V Input, 2.0 kHz to 20 kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions: 451mm x 286mm x 326mm D
(17.75 x 11.25 x 12.85 in. D)
SHIPPING WEIGHT: 34 lbs. (15.4 kg.)
WARRANTY INFORMATION:
• Refer to the Warranty Statement packed with each product.
Microfoam
Packaging
74309
Polybag
74357
Tape
65012-01
Carton
990-00007-00
Tray, Bottom
991-00014-00
Tray, Top
991-00013-00
Warranty 59660
Owners Manual
330875-001
Speaker,
Low Freq
508G-3S
(73284-01X)
Speaker,
High Freq
031TiS-1
Gold Diaphragm
(330862-001)
Power Amp
(See Page 2)
GRN
YEL
YEL/BLK
GRN/BLK
SCHEMATIC N6208
(See Page 4)
NOTE: CONE/DIAPHRAGM KIT NOT AVAILABLE.
DEFECTIVE DRIVER SHOULD BE REPLACED.
Power Cord 120V
425-00001-00
Power Cord 230V
425-00001-01