JBL 2142-H Brochure

300 mm (12in)
Professional Series
Key Features:
New 44 mm (1.75 in) Pure Titanium Dome High Frequency Transducer
Frequency Range (- 10 dB):
Sensitivity: 97 dB SPL 1 W,
1 m (3.3 ft)
Power Capacity: 90 W IEC
Pink Noise
Bi-Amplifier Terminals
Integral Transformer Mounting Bracket
The JBL 2142H Coaxial Transducer represents the results of JBL’s inten­sive research into the performance and applications of coaxial trans­ducers intended for engineered sound applications. To achieve maxi­mum power handling while main­taining wide bandwidth and consis­tent dispersion in several critical HF octave bands, JBL engineers devel­oped a new size and configuration
44 mm (1.75 in) high-frequency trans­ducer, incorporating a pure titanium dome with JBL’s patented “diamond surround” for control over secondary resonances.
The low frequency driver combines a rugged die-cast frame with a spe­cially designed cone and 51 mm (2 in)
voice-coil motor structure that ope-
rates in tandem with the HF element to sustain smooth system response and stable dispersion through the crossover region.
An integral transformer mounting bracket, built-in provisions for quick bi-amplifier hookups, and a special snap-off network access cover are all designed to reduce contractor fabrica­tion time in the shop and installer placement time at the site.
In response to consultant and con-
tractor requests, the JBL 2142H was
designed to perform well in the most commonly-specified utility metal enclosure and baffle combinations, despite the generally detrimental acoustical properties of those enclo­sures. Custom-build boxes will usually result in better performance charac­teristics than those published here.
2142H
Coaxial Transducer
Preliminary Specifications:
SYSTEM:
Frequency Range ( - 10 dB):60 Hz - 22 kHz
Power Rating
Sensitivity
Nominal Impedance: 8 ohms
Crossover Frequency: 2.7 kHz
LOW FREQUENCY TRANSDUCER:
Nominal Diameter:300 mm (12 in)
Voice Coil Diameter: 51 mm (2 in)
Magnet Weight:1.1 kg (2.4 lb)
Sensitivity
HIGH FREQUENCY DOME RADIATOR:
Nominal Diameter:
Voice Coil Diameter:44 mm (1.75 in)
Magnet Weight: 0.54 kg (1.2 lb)
Sensitivity
Dispersion Angle
GENERAL:
Input Terminations:2 x 2 barrier strip with removable jumpers to
Transformer Mounting:Integral mounting plate on LF frame
Recommended Enclosure Volume:3 cu ft
System Net Weight:5.5 kg (12 lb)
(1) Rating based on test signal of filtered random noise conforming to the international standard IEC 268-1 (pink noise with 12 dB per octave rollof below 40 Hz and above 5000 Hz with a peak-to-average ratio of 6 dB), 2 hours duration.
(2) Averaged from 500 Hz to 2.5 kHz
(3) Averaged from 100 Hz to 500 Hz
(4) Averaged from 2 kHz to 10 kHz (5) Included by -6 dB down points, averaged between 1 kHz and 10 kHz
1
:90 W continuous pink noise
2
:97 dB, 1 W (2.83 V), 1 m (3.3 ft)
3
:93 dB, 1 W (2.83 V), 1 m (3.3 ft)
50 mm (1.95 in)
4
98 dB, 1 W (2.83 V), 1 m (3.3 ft)
5
: 80° Nominal
Polarity:Positive voltage to ( + ) terminal on network
input gives forward L.F. cone motion
permit bi-amplification
2142H 300 mm (12 in) Coaxial Transducer
THIELE/SMALL PARAMETERS:
F,:
72 Hz
&:
5.2 ohms
Q,,:
0.92
V,,: 45 1(1.6 ft3)
S,:
0.055 m2 (85.25 in2)
G,;,:
6.4 mm (0.25 in)
V,:
352 cm3 (21.2 in3)
L:
0.85 mH
TO
(Half space): 1.82%
P, (Max): 100 W
MOUNTING INFORMATION:
Overall Diameter: 311 mm (12¼ in)
Bolt Circle Diameter: 294 mm (11 9/10 in)
Baffle Cutout Diameter (rear mount):
280 mm (11 1/16 in)
Baffle Cutout Diameter (front mount): 279 mm (11 in)
JBL continually engages in research related to product improvement. New materials, pro-
duction methods, and design refinements are introduced into existing products without notice as a routine expression of that philosophy For this reason, any current JBL pro­duct may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated
Frequency Response, 1 W at 1 m; Impedance
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200 Northridge, California 91329 U.S.A.
)II
A Harman International Company
SS 2142H CRP 5M 10/96
Loading...