Page 1
www.jbctools.com
INSTRUCTION MANUAL
INSTRUCTION MANUAL
WS440 High-Temperature
Wire Strippers
Ref. WS440-A
Page 2
Index
1. Pac king List ....................................................................................................................... 3
2. Safety ................................................................................................................................ 4
3. Featur es & Connecti on s ................................................................................................. 5
4. Changing Cartri tges ....................................................................................................... 6
5. Adjustab le Strip Ga ug e ................................................................................................... 7
6. Stripping a Wire ............................................................................................................... 7
7. Changing Gr ip s ................................................................................................................ 8-9
8. Accesories ......................................................................................................................... 10
9. Notes .................................................................................................................................. 11
10. Specificatio ns ................................................................................................................. 12
Page
2
Page 3
www.jbctools.com
Packing List
The following items are included:
WS440 High-Temperature Wire Strippers .................................................................................... 1 unit
Ref. WS440-A
Metal Brush................................................1 unit
Ref. 0022793
Manual ............................................... 1 unit
Ref. 0023034
www.jbctools.com
INSTRUCTION MANUAL
WS440 High-Temperature
Wire Strippers
Ref. WS440-A
3
Page 4
Safety
Warning
- Do not touch the blade or the metal parts arround.
- Do not allow the blade be close to flammable materials.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- This appliance can be used by children over the age of eight and also persons with reduced physical, sensory or mental capabilities or lack of experience provided that they have been given adequate supervision or instruction concerning use of the appliance and understand the hazards involved.
- Maintenance must not be carried out by children unless supervised.
- Place the tool on the stand when is not in use.
- Turn off the power when not in use, changing parts or storing.
Caution
- Do not use the Wire Stripper for other applications than wire stripping.
- Do not modify or customize the Wire Stripper.
- Do not hit the blade against workbench to eliminate stripped insulation debris, This behavior
would damage the blade.
- Remove power from the tool by holding the plug, not the wires.
- Be careful with the fumes produced when stripping. We recomend to use a fume extractor.
4
Page 5
Features and Connections
WS Control Unit
(Required but not
supplied)
www.jbctools.com
USB Connector
Equipotential connector
Stand cable
Ref. 001128 3
Main switch
Fuse
Stand
Ref. WS-SA
(Required but not
supplied)
Power Socket
W440 Cartridges
(Required but not
supplied)
WS440
High-Temperature
Wire Strippers
Ref. WS440-A
5
Page 6
Changing Cartridges
Cartridge electric
connection screw
Mark
Important: It is essential to insert the
cartridges up to the mark for a proper
WARNING: It is essential to tighten the screws
for the tool to function.
W440 cartridges have a proper centering to ensure a good functionality.
Before tightening the screws, align the cartridges in working position using a flat pliers (Ref. PLR-195).
connection.
Make sure both cartridges are equally
inserted.
Cartridges aligner
W440 Blade Range
AWG
(mm)
36
(0.127)
32
(0.202)
30
(0.255)
28
(0.321)
26
(0.405)
24
(0.511)
Ref. W440-001
For special blade cartridges contact us on customtips@jbctools.com
6
AWG
(mm)
28
(0.321)
26
(0.405)
24
(0.511)
22
(0.644)
20
(0.812)
18
(1.020)
W440-002 W440-004
W440-003 W440-005 W440-006
Flat Blade (no holes)
Page 7
Adjustable Strip Gauge
Adjust the strip gauge according to your stripping requirements.
Strip Gauge Knob Strip Gauge
Stripping a Wire
2. Close 1. A lig n
www.jbctools.com
Place the wire touching the strip gauge. Pinch the wire with the blades acording to the
diameter of the wire to be stripped. The pinched
area will be melted by heat.
2. Remove
Pull toward the wire end to be stripped.
7
Page 8
Changing Grips
1. Insert the slide-on
tabs into the
new grip.
2. Place the tabs
inserted into the
grip at the top of
the handle.
tabs
Tabs
Grip
new grip
8
Page 9
3. Push the grip
with the tabs
onto the handle.
www.jbctools.com
4. To remove the
tabs, hold the
grip and pull them
out. Use pliers if
necessary.
Hold this way
so that the
tab can slide
9
Page 10
Accessories
Grips
Ref. 0023533
10
WS440 High-
Temperature Wire
Stripper
Page 11
Notes
www.jbctools.com
11
Page 12
Specifications
- Weight: 0.12 kg (0.26 lb)
- Dimensions: 97 x 36 x 27 mm (3.82 x 1.42 x 1.06 in)
- Package Dimensions: 277 x 73 x 50 mm (10.91 x 2.87 x 1.97 lb)
- Package Weight: 0.16 kg (0.35lb)
- Max. power per car tridge: 40W
- Cable length: 1,2 m (47.2 in)
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warrant y does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 3 0 days of purchase.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
www.jbctools.com
00 23 03 4-0719
Loading...