INSTRUCTION MANUAL
TES / JTS
Stand for Heater Hose Set
This manual corresponds to the following references:
TE-SF (for TE Precision Heater Hose Set)
JT- S F (for JT Heater Hose Set)
Packing List
Box includes one stand according to purchased reference.
Stand for
TE Precision Heater Hose Set .............. 1 unit
Manual ......................................................... 1 unit
Re f. 0027184
2
Stand for
JT Heater Hose Set .................................. 1 unit
Features and Connections
para manuales - color gris
Nozzle Changer
Ajustable
Tool Holder
Nozzle Storage
To
Control Unit
3
NH
NH
JTT
NH
NH
JTT
Assembly
Adjust the tool holder angle to suit your work position.
Nozzle Extractor
Place the heating element with the assembled
nozzle in the nozzle changer and pull the tool
to remove the nozzle.
The nozzle comes to rest in the nozzle storage.
4
Attach the nozzle and press the nozzle onto the
heating element with the help of the opening
in the nozzle changer.
Maintenance
para manuales - color gris
Before carrying out maintenance or storage, always unplug the stand from the station
- Use a damp cloth to clean the stand. Alcohol can be used only when cleaning the metal parts.
- Check periodically that the metal parts of the tool/stand are clean so that the station can check
the tool’s status.
- Periodically check all cables.
- Replace any defective or damaged parts. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
Clean periodically
5
Notes
Safety
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
- Do not use the stands for any purpose other than soldering or rework.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded before
use. When unplugging it, hold the plug, not the wire.
- Do not work on electrically live parts.
- The tool should be placed in the stand when not in use in order to activate the sleep mode. The
soldering tip, the metal part of the tool and the stand may still be hot even when the station is turned
off. Handle with care, including when adjusting the stand position.
- Avoid the contact of flux with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working
to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight and also persons with reduced physical,
sensor y or mental capabilities or lack of experience provided that they have been given adequate
supervision or instruction concerning use of the appliance and understand the hazards involved.
Children must not play with the appliance.
- Maintenance must not be carried out by children unless super vised.
6
Notes
para manuales - color gris
7
para manuales - color gris
Specifications
TES
Stand for TE Precision Heater Hose Set
Ref.: TE-SE
- Includes Nozzle extractor
- Total Net Weight 1203 g / 2.65 lb
- Package Dimensions / Weight: 1449 g / 3.19 lb
(L x W x H) 342 x 155 x 120 mm / 13.46 x 6.10 x 4.72 in
JTS
Stand for JT Heater Hose Set
Ref.: JT-SE
- Includes Nozzle extractor
- Total Net Weight 1234 g / 2.72 lb
- Package Dimensions / Weight: 1515 g / 3.34 lb
(L x W x H) 342 x 155 x 120 mm / 13.46 x 6.10 x 4.72 in
Complies with CE standards
ESD safe
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective par ts and labour.
Warrant y does not cover product wear or misuse.
In order for the warranty to be valid, equipme nt must
be returned, postage paid, to the dealer where it was
purchased.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic e quipment at the end of its life must
be collected and returned to an authorized recycling facility.
0027184-130522
Loading...